We spent many hours on research and managed to find top 10 car speakers subwoofer with amp that is best suitable for you. This review is based on reliable sources, product specs, and hundreds of customer reviews. In this article, were going to highlight the main features of the best car speakers subwoofer with amp and why they are important when it comes to choosing the right one.

Best car speakers subwoofer with amp

Related posts:

Best car speakers subwoofer with amp reviews

1. Rockville SS8P 400w 8" Slim Under-Seat Active Powered Car/Truck Subwoofer Sub

Feature

Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
Enclosure is made out of cast aluminum which stays cool at all times.
Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet.
PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit.
Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0 or 180.
Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%.
Subwoofer Level Remote Control. Fuse Rating: Single 10A. Peak Power 400 Watts. RMS Power: 100 Watts.
Impedance: 2 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz.
Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V

Description

The SS8P is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 2.8" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is clean and simple. This is a true all in one subwoofer solution with the subwoofer built into the enclosure along with a top of the line amplifier built in as well.

We focused on making installation a breeze so we designed this unit with you the customer in mind. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.

The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Something else we did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitors models are more challenging to install.

The SS8P has 400 watts of peak power and 100 watts RMS. This has great controls so you can adjust the sound to your liking. It has a level control for the volume and subsonic filter to filter out the really low frequencies which the human ear cannot hear. This also has a low pass crossover filter, phase control, input sensitivity, and bass boost.

Included is a remote bass knob, and mounting hardware but the best thing about our model is the sound. It is slim but it sounds like a full sized subwoofer If you are not happy with it we will offer you a 90-day money back guarantee. If you dont like the sound, we will send you a pre-paid label and refund you in full!

2. Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub

Feature

Rockville RW10CA 800 Watt 10" Slim Car Subwoofer. 800 Watts Peak / 200 Watts RMS.
PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit.
Overload Protection Circuit. Phase Switch: 0 or 180. Low Pass Filter: 50Hz - 150Hz.
Bass Boost: 0 - 18dB @ 45Hz. Subwoofer Level Remote Control . Built in Subsonic Filter @ 29Hz

Description

The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant. Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder. If you are not happy with any Rockville product we will take it back within 30 days of when you receive it and refund you. We know our our products will satisfy you.

Features:

Rockville RW10CA 800 Watt 10 Slim Car Subwoofer
800 Watts Peak / 200 Watts RMS
PWM MOSFET Power Supply
Low Level RCA Input
High Level Inputs with Auto Turn-On Technology
Adjustable Input Sensitivity
Soft Delayed Remote Turn-On
Thermal Protection Circuit, Short Protection Circuit
Overload Protection Circuit
Phase Switch: 0 or 180
Low Pass Filter: 50Hz - 150Hz
Bass Boost: 0 - 18dB @ 45Hz
Subwoofer Level Remote Control
Built in Subsonic Filter @ 29Hz

3. BOSS Audio Systems BAB10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Feature

SPACE SAVER: If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer. PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s). HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers. VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. Car speakers. Car amplifier. Car subwoofer
WARRANTY: BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality. DIMENSIONS: 14 inches in Depth, 12.3 inches in Width and 3.3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles

Description

BOSS Audio BAB10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles That Need Bass But Have Limited Space

4. Pioneer TS-WX1210A 12" Sealed enclosure active subwoofer with built-in amplifier

Feature

1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier, Power Handling: Peak: 1300W / RMS: 350W, Preloaded with a single 12" Subwoofer, Built-in Class D amplifier, Sealed enclosure with carpet
Subwoofer Features: Cellulose fiber cone, Urethane surround, Frequency Response: 20 - 125, Sensitivity: 114dB
Amplifier Features: Class D amplifier, Cross Overs, 0-12dB Bass Boost, Remote knob included
Enclosure Features: Carpet finish

Description

Pioneer TS-WX1210A 12" Sealed enclosure active subwoofer with built-in amplifier
1,300 Watts Max Power. (350 Watts Nom.)
Built-In 300 Watts Output Class-D Amplifier
Variable Bass Boost (0 to +12 dB, 40Hz to 100Hz)
Wired Remote Bass Control & Gain Control at Side Panel

5. Sound Storm LOPRO8 Amplified Car Subwoofer - 600 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles That Need Bass But Have Limited Space

Feature

8" woofer with 800 Watt Max Built-in Amplifier
Variable Low Pass Filter, Subsonic Filter and Bass Boost
Remote Level Control
Thermal, Overload and Short Protection Circuits
High Level and RCA Low Level Inputs, Switchable Phase Control
3 Year Platinum Dealer Warranty

Description

Give your vehicle's audio system an upgrade with the SSL LoPro8 Class A/B 8"" Low Profile Amplified Subwoofer. This powerful Amplified Subwoofer features 600 Watts Max Power with a MOSFET power supply to take your music to the next level. With High and Low Level Inputs it can be hooked up to just about any in-dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Phase Control and Remote Subwoofer Control. Gear up and get your music thumping with the Sound Storm LoPro10.

For further product details, please scroll down.

6. BOSS Audio Systems KIT2 8 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power To Your Radio, Subwoofers and Speakers

Feature

30 Ft. of Speaker Wire
20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable
Competition Quality Fuse Holder with AGU Fuse Plus #10, 5/16" and 1/4" Ring Terminals
6 ft. Split Loom Tubing, (3) Rubber Grommets and (20) 4" Wire Ties
8 gauge amplifier installation kit
Competition high-quality fuse holder
Ring terminals: #10, 0.25-inch, 0.31-inch
Twenty 4-inch wire ties
Many feet of wire and cable: red power, black ground, blue turn-on, speaker wire

Description

8 Gauge amplifier installation kit includes:

7. MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2

Feature

Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier
TNA251 amplifier delivers 250 watts x 1 at 2 ohms; 150 watts x 1 at 4 ohms
Variable low- and high-pass filters offer 40Hz-400Hz range for sound shaping
TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power
Enclosure boasts 5/8" MDF construction, aviation-grade black carpet, and embroidered Terminator logo

Description

If you're looking for a subwoofer that not only sounds, but also looks great? Then this 12-inch MTX Subwoofer and Amp kit is for you. It offers super-deep bass sounds, all while keeping maximum sound quality. This MTX series subwoofer system includes two subs, sub-enclosure and a car amp. You'll just need to connect everything with the amp kit to add some serious bass to your ride. nn Includes a one-year manufacturer warranty! We are an authorized MTX dealer!

8. Rockville Rws12ca Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure

Feature

1200 watts peak power output 400 watts RMS CEA rated
12" super slim subwoofer
3D molded acrylic dust cap
Vented Core magnet motor Structure
70oz. Magnet

Description

Rockville Rws12ca slim 1200 Watt 12 amplified powered car Subwoofer in sealed enclosure CEA Rated with 70oz. Magnet

9. Rockville RW10CA 10" 800 Watt Under-Seat Slim Amplified Car Subwoofer +Wire Kit

Feature

Package: Rockville RW10CA 10" 800 Watt Peak/200 Watt RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote + Rockville RWK10 Complete 10 Gauge Wire Kit With Rca Cables
Rockville RW10CA 800 Watt 10" Slim Car Subwoofer. 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit.
Phase Switch: 0 or 180. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz. Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m
Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire.
3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

Description

The RW10CA is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.7" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.

We wanted to truly make installation a breeze so we designed this unit with the user in mind from start to finish. We added high level inputs so you don't need a remote wire from your receiver to trigger the unit on and off. The smart circuit will sense that an audio signal is present and turn on your radio and a signal is present. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Using the high level input is also the fastest and easiest way to install an aftermarket amp subwoofer combination since you do not have to remove the receiver. You simply use the high level input and wire it to one of your speakers. Another thing we did to make installation a breeze is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitors models are more challenging to install.

The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant. Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder.

This has amazing controls so you can tweak the sound to your liking. It has a level control for the volume, a subsonic filter to filter out the really low frequencies that the human ear can not hear. This also has a low pass crossover filter, phase control, and bass boost.

Included is a remote bass knob, and mounting hardware.

10. Rockville RWS12CA Slim 1200 Watt 12" Powered Car Subwoofer Enclosure + Wire Kit

Feature

Rockville RWS12CA Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure. 1200 Watts Peak power output. 400 Watts RMS CEA rated. 12" Super Slim Subwoofer. Ultra Stiff Composite Pulp Cone with Kevlar Reinforcement. 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround. High Power Strontium Magnet with Ultra Saturated High BL Motor Structure
Vented Core Magnet Motor Structure. 2" High Temperature Aluminum Voice Coil. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max. 70oz. Magnet Motor Structure. Super Slim Sealed MDF Enclosure Design. Aviation Grade Black Tweet Carpet with Embroidered Logo. Black Texture Synthetic Leather Front Panel. Impedance: 4-ohms. Frequency response: 38Hz-500Hz. SPL @ 1w/1m: 96dB. Dimensions: (LxWxH): 24.50" x 7.00" x 15.375"
Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge Clear SuperFlex Ground Wire
Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Description

Rockville has developed and perfected a smart, integrated solution for adding bass to any vehicle's audio system. The Rockville slim powered subwoofer combine subwoofers with matching enclosures and amplifiers for optimal bass performance.

Features:

Rockville RWS12CA Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure
3D Molded Acrylic Dust Cap
Expanded & Rolled Steal Basket
High Density Laminated Foam Surround
Vented Core Magnet Motor Structure
2" High Temperature Aluminum Voice Coil
8mm Washer & Yoke Plates
13.6mm Peak-to-Peak X-Max
70oz. Magnet Motor Structure
Super Slim Sealed MDF Enclosure Design
Aviation Grade Black Tweet Carpet with Embroidered Logo
Black Texture Synthetic Leather Front Panel
Dimensions: (LxWxH): 24.50" x 7.00" x 15.375"
Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
(1) 17 High Grade Twisted Pair of 100% Copper RCA Cable
Gold Plated AGU Heat Resistant Fuse Holder
60 Amp AGU Gold Plated Fuse
7 Split Tube Loom
Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Soft abrasion proof insulating jacket allows for 100% improved flexibility
PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Conclusion

All above are our suggestions for car speakers subwoofer with amp. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using car speakers subwoofer with amp with us by comment in this post. Thank you!
Harriet Collins