Where to find jointer and planer sharpener?

There are many reasons you might choose to buy jointer and planer sharpener but it is not easy to find the best suitable jointer and planer sharpener for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best jointer and planer sharpener.

Best jointer and planer sharpener

Related posts:

Best jointer and planer sharpener reviews

1. Steelex D1123 Jointer and Planer Sharpener

Feature

Sharpen planer and jointer knives to a razor keen edge without removing them from cutterheads
The honing tool features two 400 grit stones
Flat stone for sharpening bevels and a diagonal stone for flat edges
Each stone has four surfaces, which can be adjusted to provide a fresh sharpening surface

Description

Sharpen planer and jointer knives to a razor keen edge without removing them from cutterheads. The honing tool features two 400 grit stones, a flat stone for sharpening bevels, and a diagonal stone for flat edges. Each stone has four surfaces, which can be adjusted to provide a fresh sharpening surface.

2. DCT Woodworking Knife Blade Sharpener Honing Tool Hone for Jointer and Planer Saw Blades, Joint and Plane Sharpening

Feature

INCREASE LIFE OF KNIVES: Use the handheld DCT Woodworking Knife Blade Sharpener Honing Tool - Hone for Jointer and Planer Saw Blades, Joint and Plane Sharpening to add a razor hone to your planer and jointer knives; Keep sharp cutters sharp and dress a blade without hassle; Use to touch up blades between uses to prolong the life of the blade; For touchups and maintenance only; Not intended as a professional sharpening replacement
SHARPEN ANGLES: Aluminum-oxide 180-grit and 400-grit stones; Flat stone for sharpening bevels and a diagonal stone for flat edges; Both stones have 4 surfaces that can be adjusted to provide a fresh sharpening surface; 4" x 1.25" x 1.25" inch (10.2cm x 3.2cm x 3.2cm) overall dimensions to fit into most tight spots
SAFETY FIRST: Saves fingertips from accidental injury when dressing blades and is the best way to hone carbide knives to razor sharpness right on the cutter head; Sharpen planer and jointer knives to a razor keen edge without removing them from cutter heads; Saves time having to remove blades when a quick swipe with these restores the sharp edge; For a more precise edge, remove blades and secure to a vise grip
VARIOUS USES: Sharpens flat and beveled surfaces quickly and easily and is great for touching up edges as you go, removing small nicks, or feathering a blade in place; Takes only a few swipes on both sides to give the knife a great edge and holds the correct angle; Does not take away the need for professional sharpening of your knives but does help maintain them
EASY OPERATION: Place the tool in the indicated positions relative to the bevel and flat surfaces to keep a level orientation of the stone for manual honing; 4" x 1.25" x 1.25" inch (10.2cm x 3.2cm x 3.2cm) wood surface of this tool offers guiding surface grip when sharpening

Description

Planer and jointer blades can dull quickly which creates a strain on the machine that will damage and burn your woodworking piece. Do not wait until it is too late and instead use the handheld DCT Woodworking Knife Blade Sharpener Honing Tool - Hone for Jointer and Planer Saw Blades, Joint and Plane Sharpening. There are 2 aluminum-oxide stones on either side of the tool. The flat stone is used to sharpen bevels and the diagonal stone is used to sharpen flat edges. Both stones have 4 surfaces that can be adjusted to provide a fresh sharpening surface. Place the tool in the indicated positions relative to the bevel and flat surfaces to keep a level orientation of the stone for manual honing. For touch ups and maintenance only; Not intended as a professional sharpening replacement.

3. 6" Quick Hone Planer/Jointer Blade Sharpener

Feature

Easy To Install
Made from extruded aluminum
Holds 2 jointer or planer knives at a perfect 90 degree angle to each other
Also available in 12" - Each sold separately

Description

The Quick Hone Jointer and Planer knife sharpening device allows you to keep your knives much longer and helps produce much better cutting results. The Quick Hone holds two jointer or planer knives at a perfect 90 degree angles to each other with beveled

4. Jointer / Planer Blade Sharpener Diamond Knife Hone 300 and 600 grit in Wood Holder with Reversible Sharpening Stones KH-10D

Feature

Keep your jointer and planes knives factory sharp w/o removing them from cutterhead
Perform several strokes along both the bevel and face of your knives and you're back to work
300 and 600 grit diamond stones
Sharpening stones are reversible

Description

Keep your jointer and planer knives factory sharp and knick-free without ever removing them from the cutter head. Perform several strokes along both the bevel and face of your knives and you're back to work. Diamond 300 and 600 grit. Sharpening stones are reversible.

5. 6" Deulen Jointer/Planer Knife Sharpener

Description

Deulen 6" Sharpening Jig

6. Deulen 12" Jointer/Planer Knife Sharpening Jig

Feature

Easy-to-use
For Knives 6" to 15"
Superior to professional sharpening service
Saves time and money
How-to video included

Description

The 12" Deulen Sharpener is the answer to putting an edge on your jointer and planer knives. The key is the two brass blade holders inset into the hardwood handle. These tracks hold the blades securely and at the proper angle. With a blade in each track, it is a simply a matter of holding the handle and rubbing the blades against an abrasive surface. We recommend abrasive paper in a progression of grits from 120 to 400 grit for final polishing. It couldn't be easier, and the proof is performance. More than one blade? In the case of 8" knives, just put two 8" blades on one, one the other. Three 12" blades? No problem! Dan has worked out a system of alternating the blades that takes just a little more time but yields the same fantastic results. Longer Blades? For For knives longer than 16", use two jigs put end to end. The bottom line: this is so easy to do you'll no longer put off sharpening your blades, so your machine won't work as hard and your finished surfaces will be smoother. Plus, you'll save time and money. Each 12" sharpener comes with written instructions, a hex wrench and a short how-to video.

7. Planer Blade Sharpener Tormek SVH-320. The Planer/Jointer Blade Sharpening Jig That Precisely Sharpens Virtually Any Length Blade

Feature

For Blades of any Length
Minimum Width of Blade is 1/2-Inch
The Tool is Guided Precisely and Ground Flat along its Whole Length
Can be Pre-Set to a Fixed Depth
Grinding angle is set with superior accuracy

Description

Longer blades (like planer / jointer blades) present a unique challenge in sharpening, especially doing it freehand. In plain terms its increasingly difficult to achieve a consistent depth and angle as the blade you are working on gets longer. And, of course, shipping them out to get sharpened is expensive and inconvenient. We at Tormek developed this planer / jointer blade sharpener to meet this exact need to sharpen those longer blades with perfect precision. Use it with our Tormek sharpening systems to get the results you want. Included with this well-made jig are a support, a blade holder, and a hex key for precise adjustments up to 1/10 of a millimeter. This allows you to adjust the edge angle and grinding depth to extremely-tool-friendly angles, giving you a sharp edge while also prolonging blade life. It fits your Tormek water cooled sharpening system, and is a must if you have a planer/jointer and longer blades.

8. Deulen 6" Jointer/Planer Knife Sharpening Jig

Feature

Easy-to-use
Superior to professional sharpening service
Saves time and money
How-to video included

Description

The 6" Deulen Sharpener is the answer to putting an edge on your jointer and planer knives. The key is the two brass blade holders inset into the hardwood handle. These tracks hold the blades securely and at the proper angle. With a blade in each track, it is a simply a matter of holding the handle and rubbing the blades against an abrasive surface. We recommend abrasive paper in a progression of grits from at 120 to 400 grit for final polishing. It couldnt be easier, and proof is performance. Yes, when done youll be able to shave hair off your arm, but the real payoff is performance. This is so easy to do, youll no longer put off sharpening your blades, your machine wont work as hard, and your wood surface will be smoother. Have more than two blades, no problem. Dan has worked out a system of alternating the blades that takes just a little more time but yields the same fantastic results. Each 6" sharpener comes with written instructions, a hex wrench and a short how-to video.

9. Jointer / Planer Blade Sharpener Aluminum Oxide Knife Hone 180 and 400 grit in Wood Holder with Reversible Sharpening Stones KH-10AO

Feature

Keep your jointer and planes knives factory sharp w/o removing them from cutterhead
Perform several strokes along both the bevel and face of your knives and you're back to work
Aluminum oxide 180 and 400 grit stones
Sharpening stones are reversible

Description

Keep your jointer and planer knives factory sharp and knick-free without ever removing them from the cutter head. Perform several strokes along both the bevel and face of your knives and you're back to work. Aluminum oxide 180 and 400 grit. Sharpening stones are reversible.

10. Shop Fox W1834 Blade Grinder, 20"

Feature

Knife holder angle adjusts from 20 degrees to 70 degrees
120-grit stone raises and lowers
Pre-lubricated ball bearings
Max blade length: 20"
Maximum knife width: 1-1/2"

Description

This dry-type Knife Grinder is ideal for sharpening planer and jointer knives. High quality cast iron construction, together with large capacity (will sharpen up to 20" planer blades) makes this grinder an excellent investment.

Conclusion

By our suggestions above, we hope that you can found the best jointer and planer sharpener for you. Please don't forget to share your experience by comment in this post. Thank you!