Top regulator knob for 2020

Finding your suitable regulator knob is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best regulator knob including detail information and customer reviews. Let’s find out which is your favorite one.

Best regulator knob

Related posts:

Best regulator knob reviews

1. OEM 5140160-28 replacement air compressor regulator knob C2002

Feature

Genuine, OEM Black & Decker Replacement Part
Black & Decker replacement regulator knob, part number 5140160-28
Compatible with: C2002Type5, C2002Type7, C2002Type8, C2002Type9, C2002-WKType5, C2002-WKType7, C2004Type1, C2004Type3, C2005Type4, C2005Type5, C2025Type2, C6001Type2, CMEC6150Type1, D2002M-WKType5, D2002M-WKType7, D2002M-WKType8, DWFP55126Type1, PCFP02003Type1, PCFP02003Type2, STFP12799Type1
Measures approximately 1.70 X 1.70 X 1.75 inches

Description

Compatible with: C2002Type5, C2002Type7, C2002Type8, C2002Type9, C2002-WKType5, C2002-WKType7, C2004Type1, C2004Type3, C2005Type4, C2005Type5, C2025Type2, C6001Type2, CMEC6150Type1, D2002M-WKType5, D2002M-WKType7, D2002M-WKType8, DWFP55126Type1, PCFP02003Type1, PCFP02003Type2, STFP12799Type1

2. Mr. Heater Regulator for Mr. Heater and SunRite Tank Top Heaters

Feature

Fits Mr Heater: MH15T, MH15TS, MH30T, MH30TS, MH45T
Fits SunRite: SRC15T, SRC30T
Replaces part #17314
1 Year Warranty
Easy to Replace

Description

Mr Heater regulator for Mr Heater and Sun Rite tank top heaters

3. Harris 3000350 25GX-15-300 Regulator with Knob

Feature

Medium to Heavy Duty
2.5" Steel Gauges
Model 25GX

Description

The 25GX is designed to be the next generation workhorse of the Harris industrial regulator line. It features larger, easier to read gauges and an ergonomic adjusting knob that also shields the adjusting mechanism from contaminants.

4. TapRite Separate Pressure Adjusting 2 Product CO2 Regulator

Feature

AT PRESENT WE DO NOT SHIP TO CALIFORNIA
Tap two kegs at the same time and control the pressure to each
0-60 gauges measure pressure to each keg
0-3000 gauge measures CO2 in tank
Nonadjustable "shut down" blows off at 55-65 PSI

Description

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Tap two kegs at the same time and control the pressure to each of them individually. This two product two pressure CO2 regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable shut down blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 Gauges measure pressure to each keg. 0-2000 Gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Specs: dimensions: 9inchW x 7 1/2inchH x 5 1/2inchD.

5. DEWALT 514006714 Regulator Knob

Feature

This is an O.E.M authorized part
Fits various DEWALT models
OEM Part Number 514006714
This is a DEWALT replacement part
Part Number 514006714
This is an O.E.M. part

Description

Fits various DEWALT models. This is an O.E.M authorized part. OEM Part Number 514006714. The product is manufactured in USA.

6. MeTer Star LPG 1 lb Adjustable Propane Gas Regulator Knob Pressure Relief Valve M121 Nozzle 1.0 mm

Feature

LPG One Pound Tank Adjustable Propane gas regulator M12X1 with nozzle 1.0mm
The Regulator Can connect U.S standard one pound propane tank directly.
CSA certified / Product item:T3 / Outlet pressure: 6"-18" W.C
Flow capacity: 47600 BTU/HR
Inlet: 1"-20 UNEF Outlet: M 10X1 / Low pressure

Description

EARTH STAR LPG One Pound Tank Adjustable Propane gas regulator M12x1 with nozzle 1.0mm LPG One Pound Tank Adjustable Propane gas regulator M12X1 with nozzle 1.0mm The Regulator Can connect U.S standard one pound propane tank directly. If you do not want the nozzle with thread, you can remove it by wrench. Description CSA certified Product item:T3 Outlet pressure: 6"-18" W.C Flow capacity: 47600 BTU/HR Inlet: 1"-20 UNEF Outlet: M 10X1

7. DozyAnt 5 feet 0-20 PSI Adjustable High Pressure Propane Regulator with Hose for QCC1/Type1 Propane Tank Cylinder Fits for LP Gas Grill Turkey Fryers Patio Heaters and More Appliances-Safety Certified

Feature

Fits QCC1/Type1 LP gas propane tanks and cylinders and 3/8-inch female flare connection. Great for BBQ, camping, tailgate party, heating needs or having a patio/camping outdoor cookout.
Adjustable 0-20 PSI high pressure output propane regulator with 5 feet hose is a must have item for your propane burners, stove, turkey fryers, heaters, smokers. Not suitable for appliances which need low pressure regulator.
High quality this product itself with CSA certification and excellent sealing quality is promised for your safety. This propane regulator with hose has excess flow protection for your safety and will automatically shut off.
100% solid brass corrosion resistant construction fitting, and provides secure, airtight connection between propane tanks cylinders and propane gas appliances.
No tools needed, easy and quick attachment for easier installation.

Description

It features a 0-20 PSI adjustable high pressure propane regulator with 5ft hose and can be installed quickly and easily to propane tanks and cylinders.
The red knob can be regulated the gas flow and pressure.( Adjustable pressure range: 0-20PSI )
The size of a 3/8 flare nut is 5/8 in order to accommodate for the flare seat.

Specification
- Length: 5 feet / 60 Inch/152.5 cm
- Apply to: propane burners, stove, turkey fryers, heaters, smokers and other propane appliances. Not suitable for appliances which need low pressure regulator.
- Inlet Pressure: 25-250PSIG
- Outlet Pressure: 0-20PSIG
- Max.flow capacity:136000BTU
- End Connector: 3/8" flare swivel nut; Hose connection: 5/8"-18UNF
- Certificate: CSA

* The DozyAnt high pressure propane regulator with hose is designed to be used with high pressure propane burners.
* There are two connections - One side works on a standard size propane tank cylinder fitting. The other side is installed on the burners
* This propane hose with regulator has excess flow protection and will automatically shut off. Protect you from danger!

Note:
1. No matter where you will use this hose, Please confirm that your propane appliance has a female 3/8 inch flare connector or find some propane adapters and fittings to match your propane appliances and this hose so that you can use it, and avoid wasting your money and time!
2. In order to use this product more safely, please adjust the regulator to 0 PSI (Off the regulator) firstly before you use.

8. DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch & Knob

Feature

Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W.
Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.
Speed Control: our motor control board can regulate motor speed by potentiometer; what's more, it support clockwise/anticlock-wise rotation adjustment.
Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative; thick blue wire for the motor positive, and the thick green for the motor negative.
PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient.

Description

Hima Motor Speed ControllerTechnical Parameters
Package Including: 1x DC Motor Controller

Input voltage range: DC 9-60V Output voltage
linear under load Output current: 0-20A
Continuous power: 1200W
Speed control way:potentiometer (linear)
Speed regulation range: 0-100%

Control frequency:25KHz Clockwise/anticlockwise rotation;support Fit motors:
DC brush Dimension: 92x52x36mm
The diameter of the potentiometer installed hole: 7mm
Wiring Connection: Thick red wire: power supply + Thick black wire: power supply - Thick blue wire, motor + Thick green wire: motor

9. Bostitch Regulator Manifold AB-9415883 Pressure Reducer

Feature

Includes (1) AB-9415883 Pressure Reducer
New, Bulk Packed
Genuine OEM Replacement Part # AB-9415883
Consult owners manual for proper part number identification and proper installation
Please refer to list for compatibility

Description

Bostitch Regulator Manifold AB-9415883 Pressure Reducer
This part is compatible with the following machines:BostitchCAP2000P-OF Type 0 Air Compressor

10. MRbrew CGA-320 Keg Regulator, Quick Disconnect CO2 Kegerator Regulator with Pressure Adjustment Knob, Beer Regulator with Safety Manual Pressure Relief Valve, with 2 Swivel Nut & 1/4'' & 5/16'' Barbs

Feature

1/4'' THREADED QUICK DISCONNECTMRbrew thread to barb keg beer regulator comes with 1/4'' swivel nut, allows CO2 regulator to be used with 1/4" and 5/16" I.D size hoses, threaded setting makes disconnection between regulator and gas hoses a great breeze!
EXCELLENT SEALING & ANTI-BACKFLOWDurable thick nylon washer achieves quad-Ring inlet seal at connection between tank and regulator, perfectly avoids one leakage source, turning off ON/OFF valve avoids back-flow of beer, worry-free operation with MRbrew keg regulator!
YOUR SAFETY, THE FIRST!Integrated sintered bronze mesh inlet gas filter perfectly controls co2 gas flow, manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator!
DUAL GAUGE & STABLE PRESSUREMRbrew upgraded regulator comes with dual pressure gauges, displays pressure clearly, easy to adjust and stabilize to the pressure you want by pressure adjustment knob, a well-built regulator for getting accurate pressure!
100% LIFELONG IUUSES SOLVING FOR YOUEach MRbrew keg regulator is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you are not satisfied, we will unconditionally solve for you!

Description

MRbrew BRAND HIGH-END HEAVY THREADED BEER KEG REGULATOR, AN AMAZING CHOICE FOR YOU!
Regulator body: Heavy forged brass is well-formed, no dents
Easy to install: Connect regulator to CO2 tank with a spanner or wrench
Highly efficient filter: Keep contaminants out of regulator, guarantee best-in purity CO2 gas
Under big pressure adjustment knob is a Big lock ring, rotate it to fix pressure

1/4'' VERSATILE SWIVEL NUT THREADED FITTING
2 Barbs: For 1/4" I.D & 5/16" I.D size hoses
Allow more options of extra functions and possibilities for your kegging system

EXCELLENT MULTI-SCENARIO APPLICABILITY
Excellent for wine and beer brewing
Suitable for bars, tasting rooms, restaurants, etc
Perfect for kegs & 5 gallon kegs & 1.75 mini kegs & half barrels & quarter barrel units

EASY TO ADJUST PRESSURE
Quick and accurate pressure adjustments through big manual pressure adjustment knob with no tools needed
Brief pulling of pressure relief valve helps ensure an accurate pressure reading on process of any adjustment to the regulator

STABLE EASY-TO-READ DUAL GAUGE WITHOUT DRIFT
0-60 PSI gauge: Displays pressure transferred to your keg
0-3000 PSI gauge: Displays the amount of co2 pressure left in CO2 cylinder
Effectively keep you knowing how much CO2 left in co2 tank

YOU WILL SURPRISINGLY GET
1* Keg regulator
1* Hose clamp
2*washer
2*1/4'' Swivel nut
2*Barbs(2 size)

KIND NOTE
Suggest pressure for beer: 10-30 PSI
Pressure relief valve releases at 45 psi
Not for gas blender or nitrogen generator application, just for CO2!
Be sure regulator is connected in a dry environment, no lube or teflon, it's a tube connection that has tight tolerance

Conclusion

By our suggestions above, we hope that you can found the best regulator knob for you. Please don't forget to share your experience by comment in this post. Thank you!