Top raspberry pi microphone module for 2020

If you looking for raspberry pi microphone module then you are right place. We are searching for the best raspberry pi microphone module on the market and analyze these products to provide you the best choice.

Best raspberry pi microphone module

Related posts:

Best raspberry pi microphone module reviews

1. Bluetooth Adapter for PC USB Bluetooth Dongle 4.0 EDR Receiver TECHKEY Wireless Transfer for Stereo Headphones Laptop Windows 10, 8.1, 8, 7, Raspberry Pi, Linux Compatible

Feature

Adds Bluetooth support to Windows 10, 8.1, 8, 7, or Linux PCs that don't already have it. Adds Bluetooth 4.0 (Bluetooth Low Energy) support to Windows 8 and higher
Supports Bluetooth speakers, headphones, headsets, keyboards, mice, and more. Extremely compact USB adapter. Safe to leave in for laptop travel. Energy efficient
Automatic install through Windows Update in Windows 10 with default Bluetooth stack. Includes Broadcom Bluetooth stack for Windows 8.1, 8 and 7 (available separately for 10). Works with Raspbian and Ubuntu on the Raspberry Pi
Does NOT add Bluetooth Low Energy (Bluetooth 4.0) capability to Windows 7 and earlier. Does NOT work in car stereo systems or TVs. Does NOT work with Mac. NOT recommended for employer-provided computers
Some audio devices, such as the Bose QuietComfort 35, require downloading specific drivers to function in Windows 7. The Monoprice 8323 is NOT compatible

2. kuman Compatible For Arduino Raspberry pi Sensor kit, 37 in 1 Robot Projects Starter Kits with Tutorials Compatible for Arduino RPi 3 2 Model B B+ K5

Feature

Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for ARDUINO, BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+
Complete Update and common models for arduino UNO NANO R3 Mega 2560 starter kit
High quality sensor kit with free tutorials for Aruino and raspberry pi
Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
30day at free testing .Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE, contact us BY Email to get documents.

Description

We're just happy that you're happy.
Our friendly customer care team will work hard to service you.
Update version than 37 sensors modules: add 100 X Resistors (10 each / 10, 100, 200, 330, 1K, 2K, 5K, 10K, 100K, 1m ohm) and one tutorilas CD at free

Packing list:

1. Analogy-Hall sensor Module1
2. Magic-ring Module1
3. Rotate-encode Module1
4. Light break sensor Module1
5. Finger-Pulse sensor Module1
6. Magnetic spring Module1
7. Obstacle avoidance sensor Module1
8. Tracking sensor Module1
9. Microphone sensor Module1
10. Laser-transmit Module1
11. Relay Module1
12. 18b20 temperature sensor Module1
13. Digital-Temperature sensor Module1
14. Linear-Hall Sensor Module1
15. Flame sensor Module1
16. High-sensitive voice sensor Module1
17. humiture sensor Module1
18. Joystick PS2 Module1
19. Infrared-receive sensor Module1
20. Passive Buzzer Module1
21. common-cathode RED&GREEN LED Module1
22. Knock sensor module1
23. Shock-switch sensor Module1
24. Photo resistor sensor Module1
25. Push button Module1
26. tilt-switch Module1
27. RGB LED Module1
28. infrared-transmit Module1
29. RGB LED Module SMD)1
30. hydrargyrum-switch sensor Module1
31. two-color commoncathode LED Module1
32. Active buzzer Module1
33. Analog-temperature sensor Module1
34. Colorful Auto-flash Module1
35. Magnet-ring sensor Module1
36. Hall sensor Module1
37. touch sensor Module1

We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have processional engineer team to offer you tutorials which you can start from beginning. We have all documents( including code) For all kits from Kuman,Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

3. OSOYOO 10 Pcs Sound Microphone Sensor Sound Detection Module High Sensitivity Module for Arduino AVR PIC Robot Projects

Feature

The Sound Detection sensor module has a built-in capacitive electret microphone which is highly sensitive to sound.
This sensor can only identify presence or absence of soundit can't recognize the frequence or volum, please don't use the module to collect sound signal.
Sensitivity Adjustable : On the top of the sound sensor is a little flathead screw you can turn to adjust the sensitivity and analog output of the sound sensor.
Output form: digital switch output (0 and 1 high and low levels)
Size: 3.4cm * 1.6cm

Description

It has 3 pins that needs to be connected to your Arduino. OUT Pin is connected to the Arduino input pin, GND is connected to the ground, the VCC is connected to +5V.
Working Voltage : 3.3V-5V
Size of PCB Board : 3.4cm * 1.6cm
Fixed bolt hole for convenient installation.

Online Tutorial :
For Arduino UNO R3 board http://osoyoo.com/2017/07/26/arduino-lesson-sound-detection-sensor/
For micro bit http://osoyoo.com/2018/09/17/micro-bit-lesson-using-the-sound-detection-sensor

Package includes:
10 x sound sensor module

4. SunFounder USB 2.0 Mini Microphone for Raspberry Pi 3, 2 Module B & RPi 1 Model B+/B Laptop Desktop PCs Skype VOIP Voice Recognition Software

Feature

Works without drivers: just plug it in to your Raspberry Pi / Windows PC for an instant microphone.
Driver-free, plug and play, Ultra Portable.
Size: 22mm x 18mm x 7mm - 0.87inch x 0.71inch x 0.28inch
Omni directional noise-canceling mic picks up sound from longer distances.
ProvidetheusageinRaspbiansystem, http://wiki.sunfounder.cc/index.php?title=To_use_USB_mini_microphone_on_Raspbian

Description

Introduction
This is a tiny USB Microphone that plugs into your Raspberry Pi, laptop or desktop computer.
No microphone on your computer? No problem - just plug this incredibly small microphone into a USB port and add microphone functionality. No need to install any extra software; Raspberry Pi / Microsoft Windows will detect the device and automatically install it. Simply launch within any program such as Skype or Google Hangouts.
Please Note : best used in a port that's not near your computer's cooling fan.

Package list
1 x USB Microphone

5. Arducam 8MP 1080P Auto Focus USB Camera Module with Microphone, 1/3.2" CMOS IMX179 Mini UVC USB2.0 Webcam Board with 3.3ft/1m Cable for Windows, Linux, Android and Mac OS

Feature

More than HD: This camera adopts 8MP IMX179 sensor for sharp image and accurate color reproduction
Autofocus: Shoot objects in millimeter level and in the distance on the same camera, automatically controlled without lens adjustment tool, closer and easier than the fixed focus camera.
Capture Video with Audio: high frame rates, MJPG 15fps@3264 x 2448, 30fps@1080P; YUY2 30fps@640x 480; audio, single microphone (optional dual channel).
Plug&Play: UVC-compliant, just connect the camera to PC computer, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed.
Applications: this tiny 36mmx36mm (compatible with 28x28mm) camera board can be installed in most hidden and narrow position for a home surveillance system, monitoring 3D Printer, object recognition and tracking or other machine vision application.

Description

The B0197 is a new member of the Arducam's USB camera family. It's an 8MP, UVC compliant, autofocus (AF) based on the 1/3.2" Sony IMX179 image sensor, USB 2.0 camera.

Specifications
- Sensor: 1/3.2" IMX179AF
- Resolution: 8MP 3264H x 2448V
- Data Format: MJPG/YUY2
- Frame Rate: MJPG 15fps@3264 x 2448, 30fps@1080P; YUY2 30fps@640x 480

Lens
- Field of View (FOV)D= 74.6, H= 64.5, V= 46. 6
- Lens Mount: M6.5
- Focusing Range: 40mm to infinity
- IR Sensitivity: Integral IR filter, visible light only

Functionality and Compatibility
- Auto Controlled Features: Saturation, Contrast, Acutance, White balance, Exposure.
- Audio: single microphone (optional dual channel)
- System Compatibility: Win7/8/10, Linux, Mac and Android with UVC

Power
- Power Supply: USB powered 5V
- Working Current: MAX 350mA

Physical
- Operating Temp.: -4F~167F (-20C~+75C).
- Dimension: 36mmx36mm (Mount compatible with 28x28mm)
- Cable Length: 3.3ft (1M)

6. Oumij Pi Expansion Board for Raspberry Pi 3 Model B / 2B /B+/A+/ Raspberry Pi Zero W X920 is Available with RCA, 3.5mm Phone Jack Output connectors and Built in IR Receiver Vishay TSOP34838

Feature

Good CompatibilityWith DAC All-function PCM5122 stereo chip and I2S Input, X920 DAC+ board is a perfect PiFi / DAC+ / HIFI / Full-HD audio expansion board for Raspberry Pi 3 Model B/ 2B / B+.Operating system:Moode Audio Player, OSMC, Openelec, Raspbian Jessie, Volumio, Pi Core Player, RuneAudio.Support Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.
Full-HD audioUp to 24-bit/192kHz playback and Class leading audio (112db SNR, and -93db THD) function, Integrated hardware volume control with TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance.Texas Instruments Ultra Low Noise Low Dropout Regulator (< 10VRMS).Infrared receiver (38KHz).Reduce CPU load with I2S audio interface.
HIFI Player NetworkAfter using X920 board, User can coordinate with the broadcast system (such as Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.) to set up your own HIFI player network.Raspberry Pi GPIO pin header position on board, can be installed as needed for other function expansion.X920 is available with RCA, 3.5mm phone jack output connectors and built in IR receiver (Vishay TSOP34838).
Easy to InstallEasy to assemble by yourself.Easy and easy to install on the Raspberry Pi motherboard without complicated wiring.Only 3 wires can be connected to other I2S devices for audio decoding.Powered by Raspberry Pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification.
Great Customer ServiceRest assured that all of our products have unconditional 30-day money back guarantee with no questions asked.If you have any doubts about this tool, please contact us, and we will have a professional after-sales team to answer your questions within 24 hours.

Description

Specification:

Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)

Output Ports: 1 x 3.5mm phone jack, 2 x RCA connectors

Analog audio output level: 2.0VRMS

Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)

IR receiver: GPIO17, 38KHz

Operating System:

Moode Audio Player, OSMC, Openelec, Raspbian Jessie,Volumio,Pi Core Player, RuneAudio

Support:Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.

Full-HD audio:up to 24-bit/192kHz playback

Built in audiophile TI Burr Brown DAC (TI PCM5122)

Class leading audio:112db SNR, and -93db THD

Integrated hardware volume control

TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance

Built in IR receiver :Vishay TSOP34838)

Available with RCA and 3.5mm phone jack output connectors

Powered by Raspberry Pi, no external power requirements

Conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification

Access to GPIO pins on HAT

Packing List:
1 x Expansion Board

7. ELP 2.8mm wide angle IR LED Infrared day night Raspberry Pi 1080P H.264 microphone PC Web usb security camera

Feature

2.8mm lens wide angle usb security camera with ir cut and ir led for day night or completely dark use
H.264 High compression with micophone equiped for audio
Home pet baby old man monitor,FPC,Robotics security camera or machine vision development
Compatible with ELP Raspberry PI or any other OS Linux,android,mac,windows system
Free driver, plug and play, work with 3rd part software

Description

Product Description
Sensor 1/3" CMOS AR0330
Picture format H.264/ MJPEG or YUY2 optional/USB Protocal USB2.0 HS/FS
Auto exposure AEC Support/Auto white blance AEB Support

Performance:
1920 (H) x 1080 (V) pixels H.264 30fps MJPEG 30fps YUY2 5fps
1280 (H) x 720 (V) pixels H.264 30fps MJPEG 30fps YUY2 10fps
640 (H) x 480 (V) pixels H.264 30fps MJPEG 30fps YUY2 30fps
640 (H) x360 (V) pixels H.264 30fps MJPEG 30fps YUY2 10fps
320 (H) x 240 (V) pixels H.264 30fps MJPEG 30fps YUY2 20fps
320 (H) x180 (V) pixels H.264 30fps MJPEG 30fps YUY2 30fps
Adjustable parameters Brightness/Contrast/Color saturation /Definition/Gamma/WB
Support OS "WinXP/Vista/WIN7/WIN8/Linux with UVC/Mac-OS X 10.4.8 or later/Wince with UVC/Android 4.0 or above"

General Description
The H.264 HD 1080P USB CMOS board camera module(model: ELP-USBFHD04H serials)come with microphone,
is ideal for many applications like security systems, portable video system, video phones,industrial machine monitoring and toys.
It use high level full HD 1080P image sensors AR0330 made by Aptina, one of the world leaders in this field of electronics.

Applications
High end home&office security monitor,Car and ship control, electronic equipment, oil field equipment,
industrial equipment, remote site and environmental monitoring, etc.

Used for all kinds of machine as below:
machinery equipment, all-in-one machine, POS equipment, STB, smart box TV BOX, advisement player,
LED display, automatic vending machine, safety box, notebook, video door phone, MID, Tablet external,
evaluator, Medical Equipment, ttendance machine, Voting system etc.

8. Comidox 3Pcs High Sensitivity Microphone Sensor AVR PIC Sound Detection Module for Arduino

Feature

The module has 2 outputs: AO, analog output, real-time output microphone voltage signal; DO, when the sound intensity reaches a certain threshold, it outputs high and low level signals, [threshold-sensitivity can be adjusted by potentiometer]
There are 3mm mounting screw holes, which are powered by a 5v DC power supply.
There is an analog output with a threshold flip level output.
High sensitivity microphone with high sensitivity.
There is a power indicator and the comparator output has an indicator.

Description

Note:
Manual measurement, with small error. Please check size in detail before purchase.
Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Package Includes: 3Pcs

9. Microphone Amplifier Module MAX4466 Microphone Preamplifier 2.4V to 5.5V 0.8 x 0.5 x 0.3in

Feature

For amplification, we use the MAX4466, an op amp designed to accomplish this delicate task.
With excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried.
You can set the gain from 25x to 125x, perfect for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loudly, the output can go up to 5Vpp.
Using it is simple: connect GND to ground, VCC to 2.4-5VDC.
Power Supply Voltage: + 2.4V to + 5.5V (can be directly connected for STM / for ARDUNIO / for Raspberry Pi and other development board)

Description

Feature:
1.For the best performance, use the "quietest" supply available (on for Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your devices. If you are connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.
2.The output pin is not designed to drive speakers or anything but the smallest in-ear headphones, you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers.

Specification:
Item Type: Microphone Amplifier Module
Power Supply Voltage: + 2.4V to + 5.5V (can be directly connected for STM / for ARDUNIO / for Raspberry Pi and other development board)
Power Supply Rejection Ratio: 112dB
Common Mode Rejection Ratio: 126dB
AVOL: 125dB (RL = 100k) Rail-To-Rail Output
Static Supply Current: <24A
Gain Bandwidth: 600kHz
Size: Approx. 20.8 x 13.8 x 7.5mm / 0.8 x 0.5 x 0.3in

Package List:
1 x Module
1 x Pin Header

10. Plugable USB Bluetooth 4.0 Low Energy Micro Adapter (Windows 10, 8.1, 8, 7, Raspberry Pi, Linux Compatible; Classic Bluetooth, and Stereo Headset Compatible)

Feature

Adds Bluetooth support to Windows 10, 8.1, 8, 7, or Linux PCs that don't already have it. Adds Bluetooth 4.0 (Bluetooth Low Energy) support to Windows 8 and higher.
Supports Bluetooth speakers, headphones, headsets, keyboards, mice, and more. Extremely compact USB adapter. Safe to leave in for laptop travel. Energy efficient.
Automatic install through Windows Update in Windows 10 with default Bluetooth stack. Includes Broadcom Bluetooth stack for Windows 8.1, 8 and 7 (available separately for 10). Works with Raspbian and Ubuntu on the Raspberry Pi.
Does NOT add Bluetooth Low Energy (Bluetooth 4.0) capability to Windows 7 and earlier. Does NOT work in car stereo systems or TVs. Does NOT work with Mac. NOT recommended for employer-provided computers.
Some audio devices, such as the Bose QuietComfort 35, require downloading specific drivers to function in Windows 7. The Monoprice 8323 is NOT compatible.

Description

Designed for maximum compatibility, small size, and low power, this Plugable adapter upgrades Windows and Linux PCs with the latest Bluetooth 4.0 support.

The adapter is a compact USB Class 2 Low Energy Bluetooth Adapter with LED. It works with other Bluetooth devices within approximately 10m (30 foot) radius, depending on environmental factors, with transfer rates up to 3 Mbps. The adapter offers the market-leading Broadcom BCM20702 chipset and backwards compatibility with classic Bluetooth (1.x and 2.x) devices.

Supported Operating Systems

Windows 7, 8, and 8.1 (with included driver installer)
Windows 8 & 10 (drivers install automatically through Windows Update, some devices require addtional software)
Linux kernels 3.0.34 and higher include basic drivers. Profile support via open-source BlueZ stack (some Linux distributions need additional manual configuration due to outdated BlueZ stack, potentially less profiles than Windows)

Does NOT support Mac OS X, macOS, or ARM-based Windows RT computers.

Does NOT support adding Bluetooth functionality to home theater systems, televisions, or automotive systems.

Supported Bluetooth Devices

Wireless Bluetooth keyboards, mice, headsets, speakers, modems, serial devices, phones, and more. Supports Xbox One S Bluetooth-capable controller in Windows 10 with Anniversary Update applied.

Supported Bluetooth Profiles

A2DP, ATT, AVRCP, GAVDP, GATT, HCRP, HFP, HID, HID over GATT, OPP, PAN, SPP, and more (Note: Profile support varies depending on operating system used, and whether WIDCOMM software is used in Windows.)

Conclusion

By our suggestions above, we hope that you can found the best raspberry pi microphone module for you. Please don't forget to share your experience by comment in this post. Thank you!