Top rain barrel spigot kit

If you looking for rain barrel spigot kit then you are right place. We are searching for the best rain barrel spigot kit on the market and analyze these products to provide you the best choice.

Best rain barrel spigot kit

Related posts:

Best rain barrel spigot kit reviews

1. RAINPAL Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

Feature

ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN.
Contain less than 0.25% lead, lead free compliant. For more info about lead free compliant, please visit epa.gov.
Heavy Duty 3.7 oz Solid Brass Bulkhead Fitting, 3/4 inch female threaded all the way, install spigot on either end. Heavy Duty 3/4 inch No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up
Bulkhead fitting need 1.25 inch diameter hole to install. Fit up to 0.4 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water.
Proudly offer LIFE TIME Warranty against leak, crack, or break. Contact us through amazon message.

Description

Advantage of RAINPAL Rain Barrel Spigot Design: You don't need to reach inside of the barrel to install. You only need a small opening(Bung hole is big enough) to install.

Install in 6 easy steps: Drill, Drop, Pick, Tighten, Wrap and Tighten.

Installation Instruction:
Tools needed: Pipe Wrench or Channellock Pliers, Power Drill, 1-1/4 inch Hole Saw, PTFE Thread Tape
Drill 1.25 inch hole on rain barrel, Center the hole 2-3 inch above the bottom(use eye protection when operation power tool)
Drop the bulkhead fitting male piece with gasket in to the barrel
Roll the barrel, pick up the fitting from outside
Install bulkhead nut and tighten
Wrap about 5 rounds of tape on the spigot thread Insert the spigot and tighten

California prop 65 warning: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reprocutiove harm.

2. EarthMinded DIY Rain Barrel Diverter Kit - Water Barrel / Rain Barrel Adapter Kit, Includes Spigot and Downspout Diverter For 3 x 4 Inch Downspouts - F-RN097

Feature

Dimensions: 6L x 3W x 3H in.
Works with both plastic drums and waste barrels
Use only with 3 x 4 in. downspouts
FlexiFit diverter allows water to pass through when barrel is full
Easy installation

Description

Turn any recycled plastic drum into a practical and environmentally friendly rain barrel with the EarthMinded DIY Rain Barrel Diverter Kit for 3 x 4 in. Downspouts. Position your drum near a downspout, and attach the FlexiFit diverter, which prevents overflow by passing the water through the downspout when the barrel is full. This kit comes with a spigot and drain with a garden hose connection. Dimensions: 6L x 3W x 3H in.. Works with both plastic drums and waste barrels. Use only with 3 x 4 in. downspouts. FlexiFit diverter allows water to pass through when barrel is full. Easy installation.

3. RAINPAL RBS005 Brass Water Container/Rain Barrel Quarter Turn Spigot(Lead Free Compliant)

Feature

YOU NEED TO HAVE THE ACCESS TO THE INSIDE OF CONTAINER TO INSTALL THE NUT
Solid Brass Quarter Turn Ball Valve Spigot, Garden Hose Hookup, with Aluminum Alloy Handle.
Contains less than 0.25% lead, "Lead Free" Compliant, For more information about "Lead Free" Compliant, please visit epa.gov
Universal design for any barrels or containers, fit up to 1/4 inch wall, Need 21 mm or 7/8 inch diameter hole to install
Tools needed for installation: electric drill, 7/8 inch hole saw, and pipe wrench or adjustable wrench w/ 1 inch capacity.

Description

California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hand after use. Contains less than 0.25% lead, "Lead Free" Compliant, OK for potable water. For more information about "Lead Free" Compliant, please visit epa.gov

4. Rain Barrel Spigot Platic w/Seal - Turn any barrel or trash can into a rain barrel

Feature

EASY TO INSTALL - Spigot fits 1 1/4" hole & includes plastic seal; use the rain barrel spigot to replace missing or old spigots
ADDED CONVENIENCE - garden hose connection is located on the outlet which allows a straight water path reduces turbulence and increases flow rate
FILL FASTER - the rain barrel spigot allows you to fill watering cans & pots faster with less waiting
ON/OFF TURN VALVE - easily twist the turn valve to release or stop as much water as desired
SAVE WATER AND MONEY - collect and conserve chemical-free rain water, reduce your water bill and use environmentally friendly methods to water your plants and complete your outdoor chores

Description

Use a 1.25" drill bit for the hole. Squeeze the rubber grommet into the hole. Screw the shut off valve into the rubber grommet.

5. Mudder PVC Spigot Rain Barre Faucet Kit 3/4 Inch Rain Barrel Valve with Bulkhead Fitting Adapter for Water Tanks, Aquariums, Tubs, Pools

Feature

Widely application: 4 mm thick durable silicone seal gasket for long-lasting,commercial plumbing, aquariums, reef tank, irrigation, swimming pools, water parks and OEM applications.
Specifications: size is 3/4 inch, material is PVC, which resists to fading, cracking, and peeling, good for all seasons
Durable and green: non-toxic, unleaded, PVC safe; fast and easy to empty your rain barrel water into a watering can versus a slow garden hose
Easy to install: drill 1 3/8 inch hole to install bulkhead fitting adapter with durable silicon seal gasket that will seal the water tight
Package includes: garden spigot kit includes 3/4 inch PVC ball valve and 3/4 inch PVC bulkhead fitting adapter for rain barrels, water tanks, or aquariums, they are good tools

Description

Essential tool:
This product fits most rain barrels, water tanks, ponds, or aquariums with 1-3/8 inch or 1-1/2 inch holes. It is durable and convenient.

Design:
The bulkhead fitting with 4 mm thick premium silicone seal gasket that will contour to the shape of the round barrels.

Advantages:
Sturdy PVC material, durable 3/4 inch ball valve with 1/4 turn handle, 4 mm thick silicon seal gasket.
Non-toxic, corrosion resistant.
Light in weight and ease of installation.
Temperature range is from 40 to 140 .
Max pressure is 150 PSI.
Requires 1 3/8 inch hole saw or spade bit.

Specifications:
Size: 3/4 inch
Weight: 162 g/ 5.7 oz
Color: as shown in the picture

Package includes:
1 x PVC ball valve
1 x PVC bulkhead fitting adapter

6. Rain Barrel Garden Spigot Kit - 3/4" PVC Ball Valve Hose Bibb with Bulkhead Fitting Adapter

Feature

This DIYer kit will easily convert your trash bins, empty plastic barrels, or water tank containers into a simple rain barrel. Bulkhead can be installed with closed top barrel
Single spigot kit includes 3/4" "SHOTGUN" PVC Ball Valve Spigot and Bulkhead Fitting Adapter
Durable and long lasting PVC . UV Resistance that will resist to fading, cracking, and peeling. Great for all seasons
Non-Toxic, LEAD FREE. PVC SAFE and perfect for your organic garden. Drill 1 3/8" hole to install
Very fast and easy way to quickly empty your rain barrel water into a watering can versus a slow garden hose

Description

Advantages:
1) High premium virgin PVC material
2) Durable 3/4" "SHOTGUN" Ball Valve with easy to turn handle
3) Non-toxic: NO LEAD and No heavy additives
4) Corrosion Resistant-unlike other brass material: Resist chemical matters or electron chemical corrosion
5) Lower Installation Costs: Light weight and ease of installation
6) Kit weighs: 4.9 ounces
7) Color: Gray with green handle
8) Male and female NPT
9) 4mm THICK silicon seal gasket
10) Bulkhead can be installed with closed top barrel

Available in 3/4" SHOTGUN and 1" BABOOZA Ball Valve Kits.



For installation video of the bulkhead adapter with closed top barrel, click here: https://www.youtube.com/watch?v=N3_eK5tHyqA

7. RTS Home Accents 50-Gallon ECO Rain Water Collection Barrel, Made with 100% Recycled Plastic and Plastic Spigot, Black

Feature

Eco Barrel is unique to our rain barrel collection as it is made of 100% Recycled Plastic and has a plastic spigot and screen
Flat back to sit flush against a wall; Linkable to other barrels to increase water collection
Save water and money by capturing rainwater to use for your lawn and garden; Optional stand to make filling watering cans easier (sold separately)
Plastic screen keeps out debris and insects; Designed to be child and pet safe with no large openings
Plastic Spigot shut off valve for hose hook-up with dual overflow; A front side overflow keeps water from flooding against your outside wall

Description

Embrace nature's solution to our emerging water shortage--collect rainwater! When drought sets in and rain is short, rain barrels can provide that precious water you need for your lawn and garden. Our 50 Gallon ECO Rain Barrel is unique from our other rain barrels in that it is made of 100% Recycled plastic. It has a plastic screen to keep out debris and insects and a plastic spigot shut off valve for hose hook up with dual overflow. Just like our other rain barrels, it also has a flat back to sit flush against a wall and is linkable to other rain barrels for increased capacity. This rain barrel can provide up to 50 gallons of pure unchlorinated water. During heavy rain falls, a typical roof can produce hundreds of gallons of water and by saving that water, you can reduce your average water usage. With those kinds of savings, this rain barrel can pay for itself in just a few seasons. A front side overflow keeps water from flooding against your outside wall. It is recommended that you drain your barrels when temperatures approach the freezing point. Optional barrel stands create a larger offset between the spigot and the ground, making it easier to fill watering cans and for general use.

8. RAINPAL RBS006 Stainless Steel Rain Barrel Spigot

Feature

Stainless Steel 304 Body w/ Aluminum Alloy Handle, No Lead, Corrosion Resistant.
Stainless Steel Ball Valve, Turn Right to close.
Fit up to 1/4 inch thickness wall, 10 mm water flow opening, With Garden Hose Hook up
Threads measure 21 mm, need 7/8 inch hole saw to install.
Just Launched, Discounted for a limited time.

Description

Stainless Steel 304 Body w/ Aluminum Alloy Handle, No Lead, Corrosion Resistant.

9. WADEO Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

Feature

Heavy Duty 3.14 oz Solid Brass Bulkhead Fitting, 1-1/8 inch female threaded all the way, install spigot on either end. Heavy Duty 1-1/8 inch No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
Two installation methods:Brass partition fittings front mounting and back mounting.
Bulkhead fittings need 1.10 inch diameter holes to install.Fit up to 0.4 inch thickness wall. Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water.
Tools needed for installation: electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench.
Two washers(8mm between inner ring and outer ring) are effective in preventing leakage.

Description

installationprocedure
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Wrap with thread tape.
Step 6:Tighten the faucet clockwise.

Conclusion

All above are our suggestions for rain barrel spigot kit. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using rain barrel spigot kit with us by comment in this post. Thank you!