Top 10 tp-link media converter for 2020

Finding your suitable tp-link media converter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best tp-link media converter including detail information and customer reviews. Let’s find out which is your favorite one.

Best tp-link media converter

Related posts:

Best tp-link media converter reviews

1. TP-Link Gigabit Ethernet Media Converter, 1000Mbps RJ45 to 1000M Multi-Mode SC Fiber (MC200CM)

Feature

Works at 1000Mbps in Full-Duplex mode for both TX port and FX port Supports auto MID/MID-X for TX port
Provides switch configuration of Force /Auto transfer mode for FX port Extends fiber distance up to 0.5km
Easy-to-view LED indicators provide status to monitor network activity easily External power supply
Standards and Protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Ports: 1x 1000M SC port; 1x 1000M RJ45 port (Auto MDI/MDIX)
Basic Function: Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance upto 0.5km using 50/125um fiber Extends fiber distance upto 0.22km using 2.5/125um fiber
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports auto MDI/MDIX for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
Extends fiber distance up to 0.5km(0.31 miles)
Easy-to-view LED indicators provide status to monitor network activity easily
External power supply

Description

TP-Link MC200CM Gigabit Ethernet Media Converter

2. StarTech.com Multimode (MM) LC Fiber Media Converter for 10/100/1000 Network - 550m - Gigabit Ethernet - 850nm - with SFP Transceiver (MCM1110MMLC)

Feature

Convert and extend different networks over a Gigabit fiber cable connection up to 550m / 1804 ft
Gigabit Ethernet fiber media converter with SFP transceiver
Compact design / Copper ethernet to fiber media converter
Supports 10/100/1000 Mbps networks / Gigabit media converter for cost-effective network extension
850nm LC multimode Gigabit fiber connection / 550m range on fiber optic interface
With auto MDIX / Metal housing
Link Fault Pass (LFP) supported / 9K Jumbo Frame supported

Description

Convert and extend a Gigabit Ethernet connection up to 550m over multimode LC fiber - This fiber media converter offers an easy, cost-effective way to extend your network over Gigabit fiber. It is equipped with a multimode transceiver which converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances or connect workstations to switches. The converter provides a powerful extended networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access. Cost-effective extension and dependable performance The Gigabit Fiber Media Converter provides a cost-effective and dependable solution for shorter range network extensions. It connects an Ethernet network to remote devices over a fiber backbone, with a 550m range on the fiber optic interface. The media converter has a durable metal housing, engineered to deliver long-lasting performance. Versatile connections for broad compatibility Fully compatible with10/100/1000Base-T Ethernet networks, thefiber media converter supports auto negotiation to bridge different speed networks and devices to a Gigabit fiber network.It provides versatile connectivity to your existing networks and devices, allowing you tomaximize the usage and performance of legacy equipment. The multimode transceiver is removable, giving you the flexibility to change your transceiver in the future to meet your networking needs. Easy installation and compact convenience The unmanaged fiber media converter has a standalone design with simple plug-and-play set-up to ensure fast and easy installation. Compact in size, the converter gives you flexible installation options - including a wall mounting option to save space. The MCM1110MMLC is backed by a StarTech.com 2-year warranty and free lifetime technical support.

3. TP-Link Gigabit Ethernet Media Converter, Up to 1000Mbps RJ45 to 1000Mbps SFP Slot Supporting MiniGBIC Modules (MC220L)

Feature

Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports auto MDI/MDIX for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
FX port support hot-swappable
Extends fiber distance up to 0.55km(0.342 miles) for multi-mode fiber and 10km (6.2 miles) for single-mode fiber
Easy-to-view LED indicators provide status to monitor network activity easily
External power supply

Description

The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19"system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers(0.342 miles) and 10 kilometers (6.2 miles) when utilizing single-mode fiber. Protocols Supported: IEEE 802.3ab IEEE 802.3z IEEE 802.3x

4. Gigabit Ethernet Media Converter, 1.25Gb/s SFP module to 10/100/1000Base-Tx, with a 1.25G 1310nm 20KM SFP Transceiver

Feature

Optical Port: 1.25Gbps, 1310nm wavelength, Dual LC fiber, support Gigabit Ethernet
RJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports wide temperature range from 0C to 60C

Description

10Gtek's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.


Main Features:
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 20KM (single mode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes

Optical Port:
1310nm Single mode
Connectors: LC connector

Ethernet Port:
Connectors: RJ-45 Connector

LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps, else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP, light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active, light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off

Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C
Warranty: 2 years

5. Gigabit Ethernet Multi-Mode LC Fiber Media Converter (SFP SX Transceiver Included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX

Feature

Optical Port: 1.25Gbps, 850nm wavelength, Dual LC fiber, support Gigabit Ethernet
RJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports working temperature range from 0C to 60C

Description

ipolex's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.

Main Features:
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 80KM (singlemode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes

Optical Port:
1550nm singlemode
Connectors: LC connector
TX Power (dBm): 0~4
Rx Sens. (dBm): < -25

Ethernet Port:
Connectors: RJ-45 Connector

LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps, else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP, light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active, light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off

Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C

Warranty:
2 years

6. Gigabit Ethernet Media Converter, Single Mode Dual SC fiber, 1000Base-LX to 10/100/1000Base-Tx, up to 20km, Pack of 2

Feature

Optical Port: 1.25Gbps, 1310nm wavelength, Dual SC fiber, support Gigabit Ethernet
RJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports wide temperature range from 0C to 60C

Description

10Gtek's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter.
The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.

Main Features:
Complies with IEEE 802.3, IEEE 802.3u,IEEE802.3z,IEEE802.3ab,IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 20km (single mode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes

Optical Port:
1310nm Single mode
Connectors: SC connector

EthernetPort:
Connectors: RJ-45 Connector

LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps,else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP,light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active,light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off

Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm(D x W x H)
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C

Warranty:
2 years

7. Gigabit Ethernet Media Converter, Singlemode LC Fiber, a Pair of 10/100/1000M Gigabit Ethernet Media Converter with a Pair of BiDi SFP LX Modules (1310/1550nm, 20km)

Feature

Smart management simplex LC fiber optical port: 1.25Gbps, 1310/1550nm wavelength, support Gigabit Ethernet; RJ45 port: 10M/100M/1000M, supports full/half duplex auto-negotiation and MDI/MDIX auto-crossover.
High-quality and widely compatibility with quall Comma QCA8334 chip to ensure stability and ultra-low Time-Delay data transmission. Complies with IEEE 802.3/802.3U/802.3Z/802.3ab, 10/100/1000baset-tx/FX. Supports jumbo frame Size 9K byte.
Easy Installation and use modulation configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX Link/Act, power, FDX can dynamic feedback Link connection State and fault detection to easily monitor network status.
Compact design only 9.3 cmx 7.1cm x 2.7cm (3.7"X 2.8"X 1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space.
What you get 2x SFP Gigabit Ethernet media converter, 1x pair of Bidi SFP LX modules, 2x DC power adapter, 1x product manual. 30-Day money-back guarantee with 1 Year and lifetime Tech Support.

Description

A7S2-33-1GX1GT-SFP Media Converter is use to expanding existing Gigabit Ethernet networks like 1000Base-TX/FX networks. Extra distances are possible with 2pcs free Bidi SFP LX Transceiver delivering up to 20km. Package: 2x 10/100/1000M Gigabit Ethernet Media Converter 1x Bidi SFP LX Transceiver,Tx1310/Rx1490nm, 20km 1x Bidi SFP LX Transceiver,Tx1490/Rx1310nm, 20km Features: Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M Auto MDI/MDI-X support on RJ-45 port Support Full Duplex and Half Duplex Specifications: Transceiver: Data Rate: .................................................1.25Gb/s Form Factor: ..............................................SFP Wave Length: .............................................Tx1310 / Rx1490nm, Tx1490 / Rx1310nm Reach: ......................................................20km Fiber Type: ................................................SMF, single LC Fiber Converter: Input voltage: ...............................................5VDC Interface: ....................................................1x RJ45, 1xSFP Dimension: .................................................93 x 71 x 27mm(D x W x H) Operating Temperature: ...............................0C to 60C Storage Temperature: ..................................-20C to 70C : ...................................................2 years

8. Gigabit Fiber Media Converter Single-Mode LC (SFP LX Transceiver Included), up to 20KM, 10/100/1000Base-Tx to 1000Base-LX

Feature

Optical Port: 1.25Gbps, 1310nm wavelength, Dual LC fiber, support Gigabit Ethernet
RJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports working temperature range from 0C to 60C

Description

ipolex's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.

Main Features:
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 80KM (singlemode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes

Optical Port:
1550nm singlemode
Connectors: LC connector
TX Power (dBm): 0~4
Rx Sens. (dBm): < -25

Ethernet Port:
Connectors: RJ-45 Connector

LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps, else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP, light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active, light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off

Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C

Warranty:
2 years

9. TP-Link Gigabit Ethernet Media Converter, Up to 1000Mbps RJ45 to 1000M Single-Mode SC Fiber (MC210CS)

Feature

Tp-link Mc210cs Gigabit Media Ethernet Converter, 1000mbps Rj45 To 1000m Single-mode Sc Fiber, Up To 15km/9miles, Chassis Mountable - 1 X Network (rj-45) - 1000base-t, 1000base-fx - External

Description

Specifications Mfr Part Number: TL-MC210CS Features: Works at 1000Mbps in Full-Duplex mode for both TX port and FX port Supports auto MID/MID-X for TX port Provides switch configuration of Force /Auto transfer mode for FX port Extends fiber distance up to 15km Easy-to-view LED indicators provide status to monitor network activity easily External power supply Standards and Protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Ports: 1x 1000M SC Port; 1x 1000M RJ45 Port (Auto MDI/MDIX) Basic Function: Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 15km Network Media: 1000BASE-T: UTP category 5, 5e cable (maximum 100m); EIA/TIA-568 100 STP (maximum 100m) 1000BASE-FX: Single-mode Fiber Power Supply: External Power Adapter LED Indicators: PWR, LINK, RX Safety & Emission: FCC, CE Dimensions (WxDxH): 3.7 x 2.9 x 1.1 inch / 94.5 x 73.0 x 27.0 mm

10. Multimode Gigabit Fiber Media Converter - Built-In Fiber Module 2 km (1.24 miles) SC - to UTP Cat5e Cat6 10/100/1000 RJ-45 - Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support

Feature

AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed And Extends in over Multi Mode Fiber to up to 2 km
NO MORE Integration Hassles, simply plug in Ethernet cable to any Ethernet port, whatever speed it is!
SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance
PLUG & PLAY - Simply plug in optical port and UTP port, and it will work immediatelly
FREE UTP patch cable in set!

Description

Extend your Gigabit or Fast Ethernet Network Over Multi Mode Fiber Up to 2 km With Ease

AN-UMG-MM-AS-1310J Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port - You just need plug in the cables and it will work right away!

Powering it up? Easy, it will come with AC power adapter in set, just plug it!

All These Important Features Are All Supported:

• Compliant with IEEE 1000Base-T and 1000Base-SX
• One 10/100/1000Base-T RJ-45 port autosensing featured
• One 1000Base-SX Multi Mode Dual Fiber port Port with SC type connector - up to 2 km distance
• Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
• Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-SX
• Power supply: 100 to 240VAC 50 to 60Hz
• Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)
• Environment: Relative humidity; 5% to 90%
• Operating temperature: 0 to 70 degree celsius
• CE, FCC, ROHS, LVD certified
• Supports Jumbo Ethernet frames up to 9000 bytes (if needed, configurable by dip switches)
• Supports LLF feature - Link Loss Feature - (if needed, configurable by dip switches)

Media converter will extend Your LAN network with any standard Ethernet interface to distances with 2 km or less - you no need to use attenuator also for significantly less distances than 2 km as well.

Setup of these units are really easy as the 3 steps shown in picture gallery, and all default settings will work for all of your cases, but for sophisticated users we had created some more customized settings available via dip switches on unit's back panel.

It's always good to have versatile and adaptive unit to all Your cases!

Questions during installation? Questions during considering a purchase? We are always here to answer You and guide You through!

Conclusion

By our suggestions above, we hope that you can found the best tp-link media converter for you. Please don't forget to share your experience by comment in this post. Thank you!