Top 10 recommendation winch disconnect plug 2020

What are criterias of the best winch disconnect plug? It is not easy to find the answer. We spent many hours to analyst top 10 winch disconnect plug and find the best one for you. Let’s find more detail below.

Best winch disconnect plug

Related posts:

Best winch disconnect plug reviews

1. Orion Motor Tech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect/Disconnect Electrical Connector Plug Kit for Recovery Winch Trailer, 12V - 36V DC (4 pcs)

Feature

2-4 gauge wire; terminal pins diameter: 0.35"; voltage: 12-36 Volts DC; capacity: 175 Amps
Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices
Simple Installation. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either ends is suitable for connection to the power or load side
Connector dimension: 3 1/8" L x 2 1/8" W x 1" H; connected set dimension: 5 1/4" L x 2 1/8" W x 1" H; package include: 4 X polycarbonate cover, 4 X hard rubber boot caps; 8 X terminal pins
1-year warranty; 100% replacement or 100% refund

Description

Description:
1. This connector kit allows for quick and convenient connect/disconnect of power from a winch or from another electrical device such as a remote battery charger, trailer, etc.
2. The bottom of the device features a fitted rubber boot to protect against dust, moisture and corrosion.
3. It's very easy to use and install. Insert the wires into the terminal pins, then solder or crimp them.
4. Connector ends are identical, so either end is suitable for connection to the power or load side.
5. Although all the components of this connector can withstand high voltages, this connector is designed for low-voltage (12-36 volts DC)
6. Direct-current use (high-voltage connectors usually have a socket and plug arrangement, so the socket, or power end, can be fully enclosed). The terminal pins accept wire from 2 to 4 gauge.

Package Includes:
2 Pair of Connectors: 4 connector ends, 8 terminal pins and 4 rubber boot caps

Specifications:
Model: SC175
Connector Size: 3-1/8 x 2-1/8 x 1 inches
Connected Set Size: 5-1/4 x 2-1/8 x 1 inches
Operating Temperature Range:-4F-221F / -20C-105C
Medium Withstanding Voltage: 2200 DC
Vibration Resistance: Excellent
Impact Resistance: High
Connect/Disconnect Cycles: 10,000 Times

2. HYCLAT Red 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer (4 Pack)

Feature

Fits 2-4 Gauge wire; Voltage: 12-36 volts; Capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices
Package include: 4x Polycarbonate cover; 4x Hard rubber Boot caps; 8x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1"; Connected set: 5-1/4" x 2-1/8" x 1"
Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.
WARRANTY: 100% money back Guarantee. If there is any question, please feel free to contact with us.

Description

This safety quick connect/disconnect connector kits are widely applied in various field. This kits always are equiped in Electrcar, folklift, electric folk truck, golf car, tour bus and many other power-driven tools to solve the power-out problem. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resitance to make the current and voltage stable. The mark of positive and negative are printed in the conncetor to avoid the misplug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust.

Very easy to install:.

1.Strip the insulation to fit the terminal pins.

2.Insert the cable into the ternimal pins.

3. Crimp the terminal pins.

4.Insert terminal pins in housing with notched side of tongue next to spring.

5.Final adjustment Push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place..

Package:4 connector ends, 8 terminal pins, and 4 rubber boot caps

3. Orion Motor Tech 4 Pcs 6-8 Gauge Battery Quick Connect Disconnect Wire Harness Plug Kit for Recovery Winch or Trailer, 12-36V DC, 50A (4 Pcs)

Feature

6-8 gauge wire; terminal pins diameter: 0.22"; voltage: 12-36 Volts DC; capacity: 50 Amps
Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices
Simple Installation. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either ends is suitable for connection to the power or load side
Connector dimension: 1-4/5" L x 1-2/5" W x 3/5" H; connected set dimension: 3-1/5" L x 1-2/5" W x 3/5" H; package include: 4 X polycarbonate cover, 4 X hard rubber boot caps; 8 X terminal pins
1-year warranty; 100% replacement or 100% refund

Description

Description:
[1]This connector kit allows for quick and convenient connect or disconnect of power from a winch or remote battery charger, trailer, etc. It is made of durable polycarbonate bearing over 10,000 connect or disconnect actions. The bottom of the devise features a fitted rubber boot to protect against dust, moisture and corrosion.
[2]Both ends are suitable for connection to the power or load side because of its identical connectors. The connectors are ideal for 12-36 volts DC low-voltage and direct current use.
[3]Featured with 0.25" inner diameter, the terminal pins accept wire from 6 to 8 gauge.
[4]Easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place.

Package Includes:
Two pairs of connectors with 4 connector ends, 8 terminal pins, and 4 rubber boot caps

Specifications:
Model: SC50
Connector Dimensions: 1-7/8" long x 1-3/8" wide x 1/2" thick
Connected Set Dimensions: 3 3/16" long x 1 3/8" wide x 1/2"thick
Operating Temperature Range:-4F-221F / -20C-105C
Medium Withstanding Voltage: 2200DC
Vibration Resistance: Excellent
Impact Resistance: High
Connect/disconnect Cycles: 10,000 times

4. Orion Motor Tech 2-4 Gauge 175A Battery Cable Quick Connect/ Disconnect Electrical Connector Plug Kit for Recovery Winch Trailer, 12V - 36V DC

Feature

175A, 12-36 volts DC
2-4 Gauge, Terminal pins diameter:0.35"
Connector Dimension: 3 1/8" L x 2 1/8" W x 1" H
Connected Set Dimension: 5 1/4" L x 2 1/8" W x 1" H
Allows for quick connect/disconnect of power from winches, trailers or other electrical devices

Description

Description:
1. This connector kit allows for quick and convenient connect/disconnect of power from a winch or from another electrical device such as a remote battery charger, trailer, etc.
2. The bottom of the device features a fitted rubber boot to protect against dust, moisture and corrosion.
3. It's very easy to use and install. Insert the wires into the terminal pins, then solder or crimp them.
4. Connector ends are identical, so either end is suitable for connection to the power or load side.
5. Although all the components can withstand high voltages, this connector is designed for low-voltage (12-36 volts DC).
6. Direct-current use (high-voltage connectors usually have a socket and plug arrangement, so the socket, or power end, can be fully enclosed). The terminal pins accept wire from 2 to 4 gauge.

Package Includes:
1 Pair of Connectors: 2 connector ends, 4 terminal pins and 2 rubber boot caps

Specifications:
Model: SC175
Connector Size: 3-1/8 x 2-1/8 x 1 inches
Connected Set Size: 5-1/4 x 2-1/8 x 1 inches
Operating Temperature Range:-4F-221F / -20C-105C
Medium Withstanding Voltage: 2200 DC
Vibration Resistance: Excellent
Impact Resistance: High
Connect/Disconnect Cycles: 10,000 Times

5. STARSIDE Battery Quick Connector Kit 175A 1/0AWG Plug Connect Disconnect Winch Trailer Grey with Waterproof Cap

Feature

UNIVERSAL: Allows quick connect and disconnect for winches, trailer wiring or other electrical devices
CURRENT RATING: For low to medium current use such as ATV winches (true rated capacity 120 amps)
Packaging: as the picture shows

Description

Quick connector set from Driver Recovery Products. Provides simple and convenient method for disconnecting power to a winch or other electrical device such as remote battery chargers, trailers, or for any purpose requiring a high-current, quick-disconnect connector.

Simply insert wires into terminal pins, then crimp or solder. Pins are then inserted into the connector housing, where they lock in place (pins can be removed from housing if necessary).

6. TOPDC Jumper Cables with Quick Connect Plug 1 Gauge 25 Feet -40 to 167 800Amp Clamps Heavy Duty Booster Cables with Carry Bag (1AWG x 25Ft)

Feature

PROFESSIONAL APPLICATION: This booster cable is perfect for full size cars, cargo vans, mid-size pickup truck and freight hauling vehicles, very easy to connect with quick plug
GOOD PERFORMANCE: CCA(Copper Coated Aluminum) and pure copper jaw both sides for easy electrical conductivity and power transfer
DURABLE CABLES: 1Gauge 25FT 700Amp heavy-duty battery jumper cables. Tangle-free design. PVC insulated cables remain flexible at -40F/-40C to 167F/75C
CONSIDERATE DESIGN: Easy to connect with step guide label and safety gloves
STRONG CLAMPS: Clamp jaw designed for side and top post. Strong spring make the clamp hold up terminal well and no falling off

7. BUNKER INDUST 50A 6-10 Gauge Battery Quick Connect Disconnect Wire Harness Plug Kit 4 Pcs Battery Cable Quick Connect Disconnect Plug for Winch Auto Car Trailer Driver Electrical Devices,Red

Feature

👊UNIVERSALHeavy-duty & multipurpose universal battery quick connector set from Driver Recovery Products. Provides simple and convenient method for connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current, quick-disconnect connector.
👊DURABLECombined shell made from sturdy PC fire-retardant materials, allowing for over 10,000 connect/disconnect actions. With fitted rubber boot covers, protect against dust, moisture and corrosi
👊SAFEBoth ends are suitable for connection to the power or load side because of its identical connectors.The ends are made to connect only one way, making it impossible to connect the wrong polarities to one another,preventing accidental reverse polarity when hooking up a charger.
👊EFFICIENTThe heavy duty components are suitable for low or medium current use. With 4 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to guarantee stable voltage and current.
👊INSTALLATIONIt is very easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place

Description

Specifications
Color: Red
Material: PC fire-retardant materials+stainless steel
Current Rating: 50A
Gauge: 6-10 A.W.G
Rated Voltage: UL rated at 600 volts DC or AC
Contacts material: copper silver
Fire rating: 94-V0
Connector Dimension: 1 7/8"" long x 1 3/8"" wide x 1/2"" thick
Terminal Pins Diameter: 0.22"
Medium Withstanding Voltage: 2200DC
Connect/disconnect Cycles: 10,000 times
Operating Temperature Range:-4F-221F / -20C-105C
Suitable For: UPS battery power connector

How to Install
Insert the wires into the terminal pins, then solder or crimp them.
Insert the terminal pins into the connector housing and lock them in place
Operating Temperature Range: -4F-221F / -20C-105C
Connector Dimension: as the picture show
Vibration Resistance: Excellent
Impact Resistance: High

Package includes
4x Connectors
8x Terminal pins
4x Rubber boot caps

8. AURELIO TECH Universal 2-4 AWG 175A Battery Connect Quick Connector Plug for 12V Winch Trailer Driver Electrical Devices

Feature

Heavy-duty & multipurpose universal battery quick connector- fits all UL rated at 600 volts DC or AC devices, batteries, power inverters and solar setups, winches, forklifts, chargers, power modules, cars, motorcycles, boats and etc.
Connect/disconnect in one second keeping things neat and organized! Suited for high-current use with winches rated 8,000 pounds or higher! Replace standard clamp ends on your battery charger to prevent accidental reverse polarity when hooking up a charger and have provisions for mounting so they can be easily secured to a vehicle.
Ultralight design with tight weather covers for 100% safety. Combined shell made from polycarbonate- a versatile and tough plastic, makes this connector sturdy and reliable.
Comes with 4 terminal pins made of red copper coated with silver. Features strong electrical conductivity and reduces the resistance to guarantee stable voltage and current.

Description

Specification:

Voltage: UL rated at 600 volts DC or AC
Terminal pins diameter: 0.258" / 6.55mm
Size: 3-1/8" x 2-1/8" x 1"
Color: Red
Capacity: 350 amps
Compatibility: 2, 3, 4 Gauge

Description:

A robust and efficient "connect & disconnect" connector kit for a winch, remote battery charger, trailer or other electrical devices. Permitting over 10,000 connect and disconnect actions. It's made from polycarbonate, a versatile and tough plastic that offers great strength combined with light weight. The bottom of the plug is lined with rubber to protect against dust, moisture and corrosion. The connectors are ideal for 12-36 volts DC low-voltage, and low or medium direct current use. The ends are designed to connect in only one direction, making it impossible to connect the wrong polarities to one another- for increased safety and convenience.
The terminal pins inner diameter is 0.258" and it can accept wires from 2 to 4 gauge.
Installation and operation are very straightforward- simply insert the wires into the terminal pins, then fuse or crimp them (make sure you use a crimping tool and not a hammer). Then insert the terminal pins into the connector housing and lock them in place.

Package Includes:
A pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).

9. Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer

Feature

UNIVERSAL: Allows quick connect and disconnect for winches or other electrical devices
CURRENT RATING: For high-current use; true rated capacity 175 amps
VOLTAGE: Designed for low-voltage (12-36 volts DC) use
GAUGE: Accepts 2-4 gauge wire
SIZE: Connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set

Description

Driver Recovery Products' quick connector set gives the user a simple, convenient way to connect and disconnect power to winches and other electrical devices. These are constructed of tough polycarbonate with a fitted rubber boot on each end to guard against dust, moisture, corrosion, and the elements. The connector ends are identical so that the user may connect either end to the power or load side. They are mated, meaning they connect in only one direction (polarity). The connectors are designed for low voltage use (12-36 volts DC). The set is compatible with any winch, but the ends may not match the connectors included with other brands. The connectors are suited for high-current use with winches rated 8,000 pounds or higher. The true rated capacity is 175 amps, although some dealers quote higher numbers for similar or even inferior connectors. Terminal pins are 0.35" in diameter and can accept up to a 4 gauge wire. Connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set. The set is easy to use; just insert the wires into the terminal pins, crimp or solder. The pins can then be inserted into the connector housing and lock in place. Each kit comes with a pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).

10. HYCLAT Red 50A 6-10 Gauge Battery Cable Quick Connect Disconnect Plug Wire Harness Plug Connector Recovery Winch Trailer (4 Pack)

Feature

Fits 6-10 Gauge wire; Voltage: 12-36 volts DC ; Capacity: 50m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.
Package include: 4x Polycarbonate cover; 4x Hard rubber Boot caps; 8x terminal pins. Diameter of the terminal pins: 1/5" Connector: 1-7/8" x 1-3/8" x 1/2".
Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.
WARRANTY: 100% money back Guarantee. If there is any question, please feel free to contact with us.

Description

This safety quick connect/disconnect connector kits are widely applied in various field. This kits always are equiped in Electrcar, folklift, electric folk truck, golf car, tour bus and many other power-driven tools to solve the power-out problem. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resitance to make the current and voltage stable. The mark of positive and negative are printed in the conncetor to avoid the misplug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust.

Very easy to install:.

1.Strip the insulation to fit the terminal pins.

2.Insert the cable into the ternimal pins.

3. Crimp the terminal pins.

4.Insert terminal pins in housing with notched side of tongue next to spring.

5.Final adjustment Push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place..

Package:4 connector ends, 8 terminal pins, and 4 rubber boot caps

Conclusion

All above are our suggestions for winch disconnect plug. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using winch disconnect plug with us by comment in this post. Thank you!