What are criterias of the best concrete anchors 1/4 x 2? It is not easy to find the answer. We spent many hours to analyst top 10 concrete anchors 1/4 x 2 and find the best one for you. Let’s find more detail below.
Best concrete anchors 1/4 x 2
Related posts:
Best concrete anchors 1/4 x 2 reviews
1. ITW Brands 24325 1/4" x 2.25", Steel, Hex Washer Head Concrete Anchors
Feature
Blue Steel Hex HeadPhillips Concrete AnchorsDesigned for fastening applications in concrete, block & brick
Use them to attach electrical equipment lumber, shutters, hose reels, downspouts & more
Topcon anchors are coated with blue climaseal for superior corrosion resistance
Highly durable, crafted with steel
Description
Tapcon concrete anchorsdeliver superior precision. TAP its own threads into concrete. Great alternative to expansion anchors, plugs, lag shields.2. CONFAST 1/4" x 2-1/4" Wedge Anchor Zinc Plated (Box of 100)
Feature
ZINC PLATED - Helps prevent rust in dry environmentsWIDE RANGE OF SIZES - Insures proper fastener for best results
PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
Description
Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2-1/4"
Thread Length
The length of the threads on the anchor is 1-1/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/8". Therefore, the anchor must be installed so that a minimum of 1-1/8" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 7/8". This will ensure that the minimum embedment of 1-1/8" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".
Torque Value
To be set properly in the concrete, the anchor must be torqued to between 5 - 10 ft./lbs.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
3. CONFAST 1/4" x 2-3/4" Hex Head Concrete Screw Anchor with Drill Bit (100 per Box)
Feature
FREE SHIPPING-All orders $25 or more ship for free; buy more and save moreBIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
SLOTTED HEX HEAD-Can be driven with a nut driver
SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
DIAMOND POINT-Easier to drive the screw to save time
Description
Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 5/16" is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2-3/4"
Thread Length
The length of the threads on the anchor is 1-3/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/4" to 1-3/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
4. Chenango Supply 1/4 x 1-3/4" Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (1/4 x 1-3/4")
Feature
1000 Hour Salt Spray Test Coating3/16 Concrete Screw Drill bit included in box
These are commonly known as Tapcons
These Concrete screws are Miami-Dade Compliant
Hex Head Uses 5/16" Nut Driver & Cuts its own threads in concrete
Description
Concrete Screws or "Tapcons" are great for screwing into concrete. Included masonry drill bit is 3/16" size. Used to anchor signs, fixtures to concrete and block buildings. These Concrete Screws have received Product Control Notice of Acceptance (No. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements.5. Chenango Supply 1/4 x 1-3/4" Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (1/4 x 1-3/4)
Feature
1000 Hour Salt Spray Test Coating3/16 Concrete Screw Drill bit included in box
These are commonly known as Tapcons
Phillips Flat Head
Cuts its own threads in concrete
Description
Concrete Screws or "Tapcons" are great for screwing into concrete. Included masonry drill bit is 3/16" size. Used to anchor signs, fixtures to concrete and block buildings.6. CONFAST 1/4" x 2-3/4" Flat Phillips Concrete Screw Anchor with Drill Bit (100 per Box)
Feature
FREE SHIPPING-All orders $25 or more ship for free; buy more and save moreBIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver
SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
DIAMOND POINT-Easier to drive the screw to save time
Description
Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A #3 is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2-3/4"
Thread Length
The length of the threads on the anchor is 1-3/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/4" to 1-3/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
7. SNUG Fasteners (SNG500) 100 Qty 1/4" x 2-1/4" Hex Head Diamond Tip Concrete Screws to Anchor Masonry, Block & Brick
Feature
Corrosion resistance and long lasting performance due to the EnviroSeal blue coatingDeep threads provide superior holding strength
Great for anchoring items to concrete, brick, block, or other masonry materials
The diamond tip allows for superior penetrating into hard materials
Package includes 100 screws and 1 masonry drill bit
Description
Corrosion resistance and long lasting performance due to the EnviroSeal blue coating. Deep threads provide superior holding strength. Great for anchoring items to concrete, brick, block, or other masonry materials. The diamond tip allows for superior penetrating into hard materials. Package includes 100 screws and 1 masonry drill bit.8. Chenango Supply 1/4 x 2-1/4" Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (1/4 x 2-1/4")
Feature
1000 Hour Salt Spray Test Coating3/16 Concrete Screw Drill bit included in box
These are commonly known as Tapcons
These Concrete screws are Miami-Dade Compliant
Hex Head Uses 5/16" Nut Driver & Cuts its own threads in concrete
Description
Concrete Screws or "Tapcons" are great for screwing into concrete. Included masonry drill bit is 3/16" size. Used to anchor signs, fixtures to concrete and block buildings. These Concrete Screws have received Product Control Notice of Acceptance (No. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements.9. SNUG Fasteners (SNG495) 100 Qty 1/4" x 2-3/4" Flat Head Phillips Diamond Tip Concrete Screws to Anchor Masonry, Block & Brick
Feature
Corrosion resistance and long lasting performance due to the EnviroSeal blue coatingDeep threads provide superior holding strength
Great for anchoring items to concrete, brick, block, or other masonry materials
The diamond tip allows for superior penetrating into hard materials
Package includes 100 screws and 1 masonry drill bit
Description
Corrosion resistance and long lasting performance due to the EnviroSeal blue coating. Deep threads provide superior holding strength. Great for anchoring items to concrete, brick, block, or other masonry materials. The diamond tip allows for superior penetrating into hard materials. Package includes 100 screws and 1 masonry drill bit.10. CONFAST 1/4" x 2" Hammer Drive Anchor (100 per box)
Feature
FREE SHIPPING-All orders $25 or more ship for free; buy more and save moreINSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure
Description
Applications
The anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2"
Minimum Embedment
The minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
