What are criterias of the best betafpv brushless quad? It is not easy to find the answer. We spent many hours to analyst top 10 betafpv brushless quad and find the best one for you. Let’s find more detail below.
Best betafpv brushless quad
Rank
Product Name
Score
Related posts:
Best betafpv brushless quad reviews
1. BETAFPV Beta65 Pro 2 Frsky 2S Brushless Whoop Drone Quadcopter with 2S F4 AIO FC Frsky Recevier 5A ESC 25mW Z02 Camera 35 Smart Audio 12000KV 0802 Motor PH2.0 Cable for Tiny Whoop FPV Racing
Feature
BETAFPV Beta65 Pro 2 is the smaller version of the Pro series. With the AIO F4 2S flight controller and 0802 12000KV brushless motors, only weighs 24g without batteries. 4g lighter and 10mm smaller than Beta75 Pro 2.Wash-out issue almost not exists in Beta65 Pro 2 drones. 2pcs 300mAh HV 1S high rate batteries are recommend by default.
The 2S F4 FC AIO Brushless FC in the Beta65 Pro 2 comes with a SPI Frsky receiver, binding procedure is easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual
Lighter, faster and higher integrated than the X series drones. With the high performance STM32F411 processor FC boards and tuned Betaflight Ominibus 4.0.0 firmware, pilots fly it like a faster Tiny Whoop racing drone.
Whole drone no soldering or tinkering necessary. Customized lightest 0802 12000KV motors with cable connectors. Just plug and play.
Description
BETAFPV Beta65 Pro 2 2S Brushless Whoop Drone with 2S F4 AIO FC Frsky Recevier 5A ESC 25mW Z02 Camera 35 Degree OSD Smart Audio 12000KV 0802 Motor PH2.0 Cable for Tiny Whoop FPV Racing
X series, like Beta65X or Beta75X, represent the highest performance of 2S whoop drones. With long range rx, powerful ESC and motors, pilots would fly the X drone like a smaller mini drones; Pro series, like Beta65 Pro 2 and Beta75 Pro 2, have a higher integrated AIO FC and lighter weight, pilots fly it like a faster Tiny Whoop drone.This is the biggest difference of the X series and Pro series drones. You could have a noticeable different experience in control.
Specification:
Weight: 24g (without battery)
Motors: 0802 12000KV with connector
Props: 31mm 4-blades props, 1.0mm shaft hole
Camera: tiny AIO Camera
Receiver Option: SPI Frsky
Battery: 300mah 1S HV Batteries 2pcs
FC
CPU: STM32F411
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
AIO Camera VTX
On the Beta65 Pro 2, it is the customized version lighter AIO VTX camera, only 2.9g.
Output power: 25mW
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: PAL
Field of view: 100-120 degrees with 1/4 lens
PACKAGE
1 * Beta65 Pro 2 BNF 2S Whoop Quadcopter
2 * 300mAh 1S HV battery
1 * Spare camera mount with 25 degree tilt
2. BETAFPV Beta75 Pro 2 Frsky Receiver 2S Brushless Quadcopter Z02 Camera OSD Smart Audio with Jst-ph2.0 Connector for Tiny Whoop FPV Racing
Feature
BETAFPV Beta75 Pro 2 is lighter but still fast enough for 2S whoop drone, customized version lighter AIO VTX camera, only 2.9g, angle is 35 degree and its output power is 25mWWash-out issue totally not exists in Beta75 Pro 2 drones. 2pcs 300mAh HV 1S high rate batteries are recommend by default. But pilot could also use their 2S battery with a replaced power cable XT30. Optional and affordable
The 2S F4 FC AIO Brushless FC in the Beta75 Pro 2 comes with a SPI Frsky receiver, binding procedure is easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual
Lighter, faster and higher integrated than the X series drones. With the high performance STM32F411 processor FC boards and tuned betaflight_matekf411rx_4.0.0 (Development Version), pilots fly it like a faster Tiny Whoop racing drone.
No soldering or tinkering necessary, Customized lightest 08028 12000KV brushless motors with cable connectors. Just plug and play.
Description
BETAFPV Beta75 Pro 2 Brushless Whoop Drone with 2S F4 AIO FC Frsky Recevier 5A ESC Z02 Camera OSD Smart Audio 12000KV 08028 Motor PH2.0 Cable for Tiny Whoop FPV RacingBind procedure:
1. Power on the board by connecting the battery or USB power. Then the green receiver LED start to flash.
2. Click the bind button for 3s. Then the green receiver LED will be solid on.
More details checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual
Specification:
Weight: 28g(without battery)
Motors: 08028 12000KV Brushless Motor
Props: 40mm 4-blades props, 1.0mm shaft hole
Camera: AIO Z02 Camera 35 degree(by default)
Receiver Option: SPI Frsky
Battery: 1S 300mAh HV Batteries
Flight Controller
CPU: STM32F411
Six-Axis: MPU-6000
Size: 26mm*26mm,fully compatible with all whoop drone mounting pattern
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD(STM32 controls OSD chip over SPI in DMA mode)
Built-in 1-2S ESC with 5A continuous and peak 6A current
Power Cable: 55mm, with 2pcs JST-PH 2.0 connector
Weight: 4.5g
AIO Camera VTX
Weight: 2.9g
Output power: 25mW
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8Ghz 6 bands 48 channels, with Raceband:5362-5945MHz
TV System: PAL
Field of view: 100-120 degrees with 1/4 lens
Package:
1 * Beta75 Pro 2 BNF 2S Whoop Quadcopter
2 * 300mAh 1S HV battery
1 * Spare camera mount with 25 degree tilt
3. BETAFPV Beta85X 4K DSMX 4S Brushless Cine Whoop Quadcopter with F4 V2 FC BLHeli_32 16A ESC Tarsier 4K Camera OSD Smart Audio 1105 5000KV Motor XT30 Cable for Micro Whoop Drone FPV Racing
Feature
Upgraded FC&ESC, totally support 4SUpgraded F4 V2 FC with BLHeli_32 16A ESC, using single N-channel MosFETs, soldering with 25V/220uf electrolytic capacitor, makes the structure and performance more stable and support 4S power definetly. Add receiver, ESC, led board, VTX pluggable ports, whole drone no solder neededTarsier 4K camera with ND8 fliterEquipped with Caddx Tarsier 4K camera with ND8 fliter which supports APP setting and switchable resolution setting of 4K, 2.7k, 1440P, 1080P
Upgraded 1105 5000KV motorUpgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors
Frame with Carbon fiber stiffener brace Added screws holes on the frame to fix the ESC, can prevent ESC from loosening and also solve the adverse wear and tear reaction from ESC and FC caused by vibration. To increase its stability, we specially add an extra stiffener brace of carbon fiber
Recommend batteryBETAFPV 450mAh 4S high rate 75C/150C 14.8V lipo battery is recommended by default
Description
BETA85X SPECIFICATIONSItem: Beta85X 4K Cine Whoop
Weight: 88.6g (without battery)
F4 V2 4S FC
16A BLHeli_32 ESC
Motors: 1105 5000KV motor
Props: 2" 4-Blades Props
Camera: CADDX Tarsier 4K
Canopy: Customized 4K Canopy
Receiver: DSMX
Battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Carbon Fiber Stiffener Brace
Flight time: 4min - 6min with 450mAh 4S battery (smooth flight in a windless environment)
FC SPECIFICATIONS
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
ESC SPECIFICATIONS
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66
CAMERA SPECIFICATIONS
Dimension: Camera:19x20mm / DVR:29x29mm(HOLE:20x20mm
FOV: 4KF 2.8, FOV 150(16/9), FPV FOV 1654/3
Lens: Dual lens 2.8 / 12Mega
Audio: DUAL DIGATIL MIC
Image Sensor: 12M SONY sensor
TV System: NTSC / PAL, changeable
Anti-Shake: Hardware anti-shake
Horizontal Resolution: 1200TVL
Image: 16:9 / 4: 3 (changeable)
Tilt angle: 20-30 with ND8 fliter
RECOMMEND PARTS
F4 V2 FC&Blheli 32 16A ESC -- www.amazon.com/dp/B07MYZT48D
1105 5000KV Motor -- www.amazon.com/dp/B07SFHZSVT
Tarsier 4K camera Camera -- www.amazon.com/dp/B07TBF3953
BETAFPV 450mAh 4S Battery -- www.amazon.com/dp/B07RZ6PQPH
85X Frame kit -- www.amazon.com/dp/B07TCGNLZF
4K Canopy -- www.amazon.com/dp/B07TCGRFDW
PACKAGE
1 * Beta85X 4K 4S Quadcopter DSMX
1 * ND8 Fliter
1 * OSD Menu Board
4. BETAFPV Beta75X HD Frsky 3S Brushless Whoop Drone with F4 AIO 12A FC Turtle V2 Camera OSD Smart Audio 1103 8000KV Motor XT30 Connector for Micro Quadcopter FPV Racing
Feature
Support 3S with 2-4S AIO FCComes with updated BETAFPV F4 2-4S AIO 12A FC, can safely support Beta75X HD to 3S batteryTurtle V2 camera for HD DVRBeta75X HD whoop Drone equipped with Caddx Turtle V2 1080p 60fps mini HD FPV camera, brings you a HD vision and a more enjoyable flight experience
Updated 1103 8000KV motorUpdated 1103 motor 11000KV to 8000KV, which is customized for 3S lipo, highest speed increased obviously with this motor. It will give you a extreme power and speed
Recommend batteryHighly recommend the newest high quality 300mAh 3S 45C battery for Beta75X, it can provide high quality, reliable power. Please note the frame of Beta75X needs to be modified by removing the 3 sticks in order to fit 300mah 3S lipo. Please refer to the sixth picture for more details
Frame&PropsDurable and light black frame is customized for Beta75X HD. Washout issue almost doesn't exist with BETAFPV&Gemfan 40mm 4-blade 1.5 mm shaft propellers
Description
Please noteThis package of Beta75X HD don't include battery. Now we highly recommend BETAFPV 300mah 3S battery for the drone. But the frame needs to be modified if you use our 300mah 3s battery on Beta75X. Please refer to the picture for more details.SPECIFICATION
Weight: 57.4g (without battery)
Motors: 1103 8000KV Brushless motor
Props: 40mm 4-blades props, 1.5mm shaft hole
HD DVR Camera: CADDX Turtle V2
Turtle V2 Canopy: Canopy for Beta75X (HD DVR)
Receiver: Frsky FCC
FC SPECIFICATIONS
CPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU6000 (SPI connection)
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC SPECIFICATIONS
Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-4S Lipo
Continue current: 12A
Peak current: 13A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Turtle V2 Camera
Camera angle: 30 no adjustable
Aspect Ratio: 4:3(non-changeable)
Image sensor: 1 / 2.7" CMOS sensor
Rating: 800TVL
TV system: NTSC
Video resolution: 1080P @ 60fps / 1080P @ 30fps / 720 @ 60fps
FPV FOV: 155
Record field of view: 170C
A01 VTX
Output power: 25mW and 200mW (Adjustable)
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Recommend Parts
F4 2-4S AIO 12A FC -- www.amazon.com/dp/B07RL29PNN
1103 8000KV Motor -- www.amazon.com/dp/B07SFJ1V6D
Beta75x HD Frame kit -- www.amazon.com/dp/B07RZPBY5G
300mAh 3S battery -- wwww.amazon.com/dp/B07SN32G8C
PACKAGE
1 * Beta75XHD3S Quadcopter (without battery)
4 * 40mm 4-blades props (2CW+2CCW)
5. BETAFPVBeta75X2SBrushlessWhoopDronewith12A ESC 2SF4FCDSMXZ02CameraOSDSmartAudio11000KV1103MotorXT30CableforTinyWhoopFPVRacing
Feature
Upgrades: 1. ESC is upgraded from 6A to 12A, gives 2s whoop drone much more POWER. 2. Led board is added to Beta75X. 3.Gemfan replaced kingkong propellers for better power and stability.The Beta75X drone comes with "props out" in default. With reversed props or "props out", so no more dipping even in hardest cornering. More details please check https://betafpv.freshdesk.com/support/solutions/articles/27000050781-know-more-about-props-out-
The DSMX receiver used on the 75X is different from the one we used before. The binding procedure is also different. Check out the details on the support link below. http://support.betafpv.com/support/solutions/articles/27000051188-cli-dump-of-beta65x-and-beta75x-dsmx-version.
Durable and light enough frame is customed for the Beta75X. A total weight of 26g give pilots a good balance of weight and nice punch on HV battery. 2pcs 1S 300mAh Lipo HV batteries are recommended in default. So pilot could also use their whoop batteries.
With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing professor.
Description
BETAFPV Beta75X 2S Brushless Whoop Quadcopter DSMX Firmware with OSD Smart Audio and Z02 Camera XT30 Cable 1103 11000KV Motors for Tiny Whoop Racing Games
Please note: In the Beta75X BNF setup, when you connect the receiver to 2S FC, don't forget to plug the battery, otherwise the receiver will have no power to work at all.
Here is a introducing video shared by Nate Payne:
https://www.youtube.com/watch?v=JHH17wrMbg0&feature=youtu.be
SPECIFICATION
Weight: 41g (without battery)
Motors: 1103 11000KV with connector
Props: 40mm 4-blades props, 1.5mm shaft hole
Camera tilt angle: 35 degree
Recommend battery: 350mAh 2S battery
Receiver Option: Frsky XM+
FC
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC
Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinue current: 12A
Peak current: 18A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Z02 AIO Camera VTX -- On the Beta75X, it is the customed version with VTX board and camera board split.
Smart Audio function is included for radio control
Output power: 0mW, 25mW and 200mW (Adjustable)
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
Package:
1 * Beta75X BNF 2S Whoop Quadcopter
1 * 350mAh 2S 35C-75C battery
1 * Spare 40mm 4-blades props (2CW+2CCW)
1 * Spare Canopy
6. BETAFPV Upgraded F405 V2 FC 4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless Beta85X Micro Quadcopter Cine Whoop Drone
Feature
This combo of F4 FC with BLHeli_32 16A ESC built-in BetaFlight OSD is customized for Cine whoop drone Beta85X. Please note: When you connect the receiver to this FC, don't forget to plug the battery, otherwise the receiver will have no power to work at all.BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC' s that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200.
Firmware version of F4 FC is Betaflight OMNIBUSF4SD (OBSD), built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode). Support TBS micro receiver with TX02, RX02 ports. RSSI ports is available.
This ESC support BLHeli_32 suite pass-through ready, Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200. It can fit motors with 1.5mm header pins connector like 1105,1103 motors etc, and you can use it work with 450mAh 3S battery or 450mAh 4S battery.
Please note this F4 2S-4S FC is built without receiver, all the ports are available on this board. So that you could connect any receiver you want on the board. Such as Frsky XM/XM+ Receiver, TBS receiver and DSMX receiver. Receiver Connection: https://betafpv.freshdesk.com/support/solutions/articles/27000049913-f4-2s-brushless-fc-esc
Description
BETAFPV F4 FC 2S-4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless FPV Micro Drone Cine Whoop Beta85X
SPECIFICATIONS
F4 FC
The F4 FC board is the same one on Beta75X drone - www.amazon.com/dp/B07H8XQ7R6
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
TX02RX02 ports is available, so that it could support TBS micro receiver
RSSI ports is available
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 2.7g
BLHELI_32 16A ESC
Support BLHELI_32
Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 2S-4S lipo
Cotinue current: 16A
Peak current: 35A
Firmware target: BETAFPV-16A-32bit
MCU:STM32F051
Motor Connectors: 1.25mm header pins connector
RECOMMENDED PARTS LIST
Frame: Beta85X frame
Motors: 1105 motors / 1103 motors with 1.5mm header pins connector
Battery: 450mAh 3S battery / 450mAh 4S battery
PACKAGE
1 * F4 brushless flight controller
1 * 4in1 16A ESC board
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
7. BETAFPV 4pcs 1103 Motor 8000KV Brushless Motors for Beta75X 3S Brushess Micro Quadcopter Brushless Whoop Drone
Feature
Compatible quadcopterSuitable for most 3S whoop drone on the market, especially recommended for updated Beta75XPowerful and reliable enoughCustomized for 3s lipo battery, highest speed increased obviously with this motor. It will gives you a extreme power and speed
Weight & SizeLight weight only 3.8g/pc with size 13.5*13.5*16.3mm. Easy to install with the Micro JST-1.25 3 pin plug
Multiple props optionalFit for 1.2"-2" propellers, like 1735,1935, 2030, 3020 propellers
High quality cablesThicker cable is not easy to break off, specially lengthened motor wires is suitable for toothpick drones
Description
BETAFPV 4pcs 1103 Motor 8000KV Brushless Motors for Beta75X 3S Micro Quadcopter Brushless Whoop DroneSpecification
Height: 14mm
Weight: about3.8g(8000KV)
Shaft:1.5mm
Motor Mount Holes: M1.6 on Dia 8.5mm
KV(rpm/V):8000KV
Plug:Micro JST-1.25 3-pins connector
Recommended Parts
FC:
F4 2-4S AIO 12A FC -- www.amazon.com/dp/B07RL29PNN
F4 FC 2-3S FC & BLHeli_32 16A ESC-- www.amazon.com/dp/B07MYZT48D
Propellers:
40mm 4-blade props (1.5mm shaft hole)-- www.amazon.com/dp/B07H9B2GJH
Frame:
Beta75X frame -- www.amazon.com/dp/B07RZPBY5G
Package
4 * BETAFPV 1103 Brushless Motors
1 * M1.6*4 screws
8. BETAFPV Toothpick F4 2-4S AIO Brushless Flight Controller BLHELI_S 12A ESC No RX with XT30 Cable for Brushless Toothpick Carbon Fiber Racing Drone Like HX100 FPV Quadcopter(Pins Pre-soldered)
Feature
Toothpick F4 2-4S AIO 12A FCIntegrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC. Customized for Toothpick drone like HX100 HX115 FPV Quad. Supports 4S battery for fast-flying experienceDouble-sided Motor Solder PadTwo options for motor installation which include pins connected or wire connected. FC is equipped with pins pad and wires pad, which offer you available choice to plug motor with pluggable pins or solder motor with wires. You will receive the pins connected version by default
New LayoutAll solder pads of this Toothpick F4 AIO FC are at the edge, with side-mount USB port, which is convenient for installation and solder
Real HolesComes with real holes instead of notches, customized for Toothpick carbon fiber drone, which is fitting for hole position to protect the carbon fiber kit for easy installation
Supported ReceiverThe F4 2-4S AIO FC Brushless Flight Controller builted without internal receiver, but supports external Frsky XM/XM+ Receiver/ DSMX Receiver / Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Compatible receivers signal include PWM, Oneshot125, Oneshot42, Dshot150, Dshot300, Dshot600
Description
BETAFPV Toothpick F4 2-4S AIO Brushless Flight Controller BLHELI_S 12A ESC No RX OSD Smart Audio with XT30 Cable for Brushless Toothpick Carbon Fiber Racing Drone like HX100 FPV Quadcopter(Pins-connected Version)SPECIFICATIONS OF ESC
Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-4S Lipo
Continue current: 12A
Peak current: 15A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G-C
Motor Connectors: 1.25mm header pins connector
Factory firmware: G-H-30-16.7
Recommend Parts
Motors:
2S: 1103 11000KV Motor - www.amazon.com/dp/B07FN64599
3S: 1103 8000KV Motor - www.amazon.com/dp/B07SFJ1V6D
1105 6000KV Motor - www.amazon.com/dp/B07MZ2BSDT
4S: 1105 5000KV Motor - www.amazon.com/dp/B07SFHZSVT
Battery:
3S: 300mAh 3S Battery - www.amazon.com/dp/B07WH1VRP1
450mAh 3S - www.amazon.com/dp/B07QMR9KKL
4S: 450mAh 4S Battery - www.amazon.com/dp/B07RZ6PQPH
Frame:
HX100 Frame: www.amazon.com/dp/B07VFPFBRT
Package:
1 * F4 2-4S AIO 12A Toothpick Brushless FC with motor pluggable pins
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration rubber dampers
9. BETAFPV F4 20A AIO 2-4S Brushless Flight Controller No RX FC BLHELI_S 20A ESC OSD Smart Audio with XT30 Cable for Brushless Micro Quadcopter FPV Racing Whoop Drone Like Beta85X CineDrone
Feature
Support&WarrantyIf there is anything problem with your BETAFPV item, please contact us before returning or refund. We will help you solve it at the first timeF4 AIO 20A Whoop FC F4 AIO 20A FC is the first 20A AIO flight controller in the market. Can totally handle 20A continuous current
Integrated FC with Light WeightIntegrated with a Betaflight MATEKF411 processor FC, Betaflight OSD, F4 MCU, and 20A ESC. The thickness of F4 1-4S AIO 20A FC from 1.6mm to 1.2mm, which reduces the weight to 5.63g while improving the ability of the ESC to continuous current 20A
Compatible Drone&MotorsWith standard 26.5x26.5mm mounting holes for easy installation in most whoop frames like Beta85X frame. Compatible with 120X130X140X brushless motors, supports 1-4S batteries. You can DIY Beta85X racing drone with this powerful FC to save weight
Supported ReceiverThe F4 1-4S AIO 20A FC Brushless Flight Controller builted without internal receiver, but supports external Frsky XM/XM+ Receiver/ DSMX Receiver / Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Compatible receivers signal include PWM, Oneshot125, Oneshot42, Dshot150, Dshot300, Dshot600
Description
BETAFPV F4 20A AIO 1-4S Brushless Flight Controller No RX BLHELI_S 20A ESC OSD Smart Audio with XT30 Cable for Brushless FPV Micro Quadcopter Racing Whoop Drone like Beta85XSPECIFICATIONS OF FC
CPU: STM32F411CEU6 (100MHZ)
Six-Axis: MPU6000 (SPI connection)
Size: 32.5*32.5mm (26.5mm mounting holes)
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
Support programmable LED like WS2812 etc
Built-in current sensor
Weight: 5.63g
SPECIFICATIONS OF ESC
Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 1-4S Lipo
Continuous current: 20A
Peak current: 25A
Firmware: BLHELI_S
Motor Connectors: 1.25mm header pins connector
RECOMMEND PARTS:
Motor:
1204 5000KV motor - www.amazon.com/dp/B07Z3RMH91
Batteries:
1S: 300mAh 1S Battery - www.amazon.com/dp/B07FFTVB8C
2S: 350mAh 2S Battery - www.amazon.com/dp/B07JG3ZFC5
3S: 300mAh 3S Battery - www.amazon.com/dp/B07WH1VRP1
4S: 450mAh 4S Battery - www.amazon.com/dp/B07RZ6PQPH
PACKAGE
1 * F4 1-4S AIO 20A Brushless Flight Controller with XT30 connector pre-sordered
4 * M1.2x4mm Screws
4 * M1.4x5mm Screws
4 * Anti-vibration Rubber Dampers
10. BETAFPV 4pcs 1204 5000KV Brushless Motor 3-4S FPV Motor for 2-3inch Micro Quadcopter FPV Racing Drone Like HX100 HX115 Beta85X Micro Drone
Feature
Compitable Dones1204 5000KV motor is one of the best motors for 2-3inch FPV Racing Drone, which has increased power efficiency, adopting multi-heat dissipation hole design helps to pull heat away continuously in flightBrand-new designThe first betafpv motor to adopt all-new unibody bell shape design with Standard mounting pattern at the bottom, adapt to all frames on the market. Adopt a curved magnet structure to achieve more smooth and silent
PerformanceSuper durable and ultra-light unibody bell shape. The sturdy structure and high-quality materials make it performs like a beast
Weight &SizeCompatible with 3-4S lipo battery, weighs 5.9g/pc with connector
Reliable supportPlease kindly contact us before negative comment or return, we will provide technical support to solve all your product issues
Description
BETAFPV 4pcs 1204 5000KV Brushless Motor 3-4S FPV Motor for 2-3inch Micro Quadcopter FPV Racing Drone like HX100 HX115 Beta85X Micro DroneThis motor can reduce the wash out problem of Beta85X
SPECIFICATION
Height: 15.4mm
Weight: 5.9g/1pc
Shaft: 1.5mm
Motor Mount Holes: M2EQS on Dia 5.0mm
KV (rpm/V): 5000KV
Input Voltage: 3-4S lipo battery
Plug and cables: Micro JST-1.25 3-pin connector with 28AWG cables (5000KV)
RECOMMENDED PARTS
Battery:
450mAh 3S Battery -- www.amazon.com/dp/B07QMR9KKL
450mAh 4S Battery -- www.amazon.com/dp/B07RZ6PQPH
Frame:
Beta85X frame -- www.amazon.com/dp/B07TCGNLZF
HX115 Frame -- www.amazon.com/dp/B07ZQJNT38
Propellers:
EMAX 2035 propeller -- www.amazon.com/dp/B07RXMJJSM
HQ 3020 Propeller -- www.amazon.com/dp/B07WVCD5MT
HQ 3030 Propeller -- www.amazon.com/dp/B07WPCVBQT
65mm 2-Blade Propeller -- www.amazon.com/dp/B07VGSQ9DB
Flight Controller: F4 12A AIO toothpick FC -- www.amazon.com/dp/B07WRXPV9R
F4 20A AIO Toothpick FC -- www.amazon.com/dp/B07Z3PYWYJ
PACKAGE
4* BETAFPV 1204 5000KV Brushless Motors
5* M2*4 Screw
