It’s hard to know which is good arduino nano box. There are alot of arduino nano box reviews on internet. In this article we suggest top 10 the best arduino nano box for you. Please read carefully and choose what is the best arduino nano box for you.
Best arduino nano box
Rank
Product Name
Score
Related posts:
Best arduino nano box reviews
1. LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
Feature
Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on Arduino IDE.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila.
Description
Specification:
CH340G Replace FT232RL.
Operating Voltage(logic level): 5V.
8 analog inputs ports:A0 ~ A7.
14 Digital input / output ports:TX,RX,D2 ~ D13.
6 PWM ports:D3, D5, D6, D9, D10, D11.
1 pairs of TTL level serial transceiver ports RX / TX.
Support USB download and Power.
Support for external 5V ~ 12V DC power supply.
Support power supply by 9V battery.
Support ISP download.
Package including:
3 x LAFVIN Nano V3.0 with ATMEGA328P Module
3 x USB Cable
2. ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
3. ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice package.The most economical way to starting Arduino programming for those beginners who are interested.
LCD1602 module with pin header (no need to be soldered by yourself).
This is the upgraded starter kit with power supply module, 9V battery with DC .
High quality Arduino UNO R3 Compatible. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit.
Description
Elego Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
30pcs Resistor
10pcs Female-to-male Dupont Wire
4. Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Feature
Microcontroller ATmega328POperating Voltage (logic level) 5 V
Input Voltage (recommended) 7V-12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
Description
Features:Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Fully Compatible to Arduino Nano V3.0 ATmega328P-AU
ATmega328 Microcontroller
Bootloader installed, ready to upload sketches from Arduino software
Microcontroller ATmega328P-AU
Operating Voltage :5V
Input Voltage (recommended) 7V-12V
Input Voltage (limits) 6V-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Dimention:Approx. 45x17x19mm
Cable Length:245mm
Color:Blue(as the picture shows)
Package:
1 xNano V3.0 ATmega328P Arduino Compatible Board
1 xMini USB Cable
5. Pinfox 5 pack Electronic Prototype ABS Plastic Junction Project Box Enclosure 100mm by 60mm by 25mm for Portable, Arduino DIY (Black)
Feature
Made of high quality ABS material. Sturdy and terrific for making those DIY projects. Easy to drill and shape openings for many items like LCDs, sockets, LEDs, buttons and so on.Four screw holes inside. If wanted to make one to go in it, such as attaching a board, there would be no problem mounting it.
Solid construction and buckle design to protect against dust, corrosion and dripping water. No screws makes it more convenience to use.
Inner dimension: Approx. 3.8 x 2.2 x 0.9 inches(96 x 56 x 23mm). Average wall thickness is 0.08 inches (2mm).
Ideal for electronic projects, power supply enclosure, amplifiers box, etc. Especially suitable for portable projects and battery powered projects.
Description
This ABS project box brings a better customizable experience.Certain modification can be done according to your requirements.
The buckle design on both two covers makes it more convenience to use without boring screws.
-Outer dimension: Approx. 3.94 x 2.36 x 0.98 inches(100 x 60 x 25mm).
-Inner dimension: Approx. 3.8 x 2.2 x 0.9 inches(96 x 56 x 23mm).
-Average wall thickness is 0.08 inches (2mm).
-Weight: about 36g ( 0.08 lb ) each
5 x Enclosure Box
6. Zulkit Project Box ABS Plastic IP65 Waterproof Dustproof Electrical Junction box Enclosure Black 3.94 x 2.68 x 1.97 inch (100X68X50mm) (Pack of 2)
Feature
Product Name: Junction Box, Electrical Boxes ; Waterproof Rating: IP65.Outer Size of electrical enclosure: 3.94" x 2.68" x 1.97"(100X68X50mm)(L*W*H)
Electric Enclosure Material: ABS, Rubber
Features: moisture proof, sunscreen, anti-corrosion, durable for years use
Package Content: 2 x Junction Box, 1 x Rubber Grommet, 4 x Screws
Description
Weatherproof junction boxes, perfect for use outdoors.junction box means these are well protected from rain and water splash back,making them perfect for joining wires inside.
The electrical junction box is easy to operate and repair, no cable cutting, more convenient.
Suitable for indoor and outdoor electrical ,communications.
Easy to install and easy to use.
100% brand new and high quality.
Package Include:
2 x Electrical Junction Box
1 x Rubber Grommet
4 x Screws
Usage: connector box is mainly suitable for indoor and outdoor electrical, communications, steel smelting, oil chemical industry, electronics, electric power, railway, construction site, mining, quarry, airport, hotel, ships, large factories,terminal equipment, sewage discharge waste water treatment,etc.
Tips to ensure the effect of the IP65 waterproof:
1)Please check and make sure rubber grommet being completely filled around the lid.(The rubber grommet has elasticity. If the rubber grommet is shorter, you can stretch it to the proper length when you are installing it on the corner parts)
2)If there is any issues,please contact our customer service,our customer service representatives are 24/7 to help!
7. Longruner Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module for Arduino
Feature
CH340G Replace FT232RLMicro-controller ATmega328P
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
Support for external 5V ~ 12V DC power supply; Support power supply by 9V battery.
Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers).
Description
Longruner Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module for Arduino Operating Voltage(logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX,RX,D2 ~ D13 6 PWM ports: D3, D5, D6, D9, D10, D11 1 pairs of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is boot loader installed in it Support USB download and Power Support for external 5V ~ 12V DC power supply Support power supply by 9V battery Package content: 5 x Nano V3.0 with ATMEGA328P Module 10 x 15 pin headers 5 x 6 pin headers8. Makeronics 840 Pieces Jumper Wire Kit with 14 Lengths for Breadboard Prototyping Solder Circuits | Electronics Experiment | Arduino or Raspberry Pi or Jetson Nano | Storage Box
Feature
[Complete Spec]Each box contains 840 wires with 14 different lengths. - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 70 pieces of each.[Easy To Use]24 AWG; male to male;Pre-cut, pre stripped and pre-formed on each end.
[Storage Box] Come with a plastic box, keep your jumper wires organized, convenient for storing and fetching.
[Bent Tweezer] Tweezer is easy and handy for plug and unplug jumpers.
[PROFESSIONAL SUPPORT] Quick-responding technical support.
Description
The jumper wires are pre-cut and bent in right angles at the ends, so you can choose the appropriate length foryour application and plug away without wiring getting messy and out of hand.
Specification:
Quantity: 840pcs
Wire Length: Each Box Include 840 wires with different lengths:
2mm: 70pcs
5mm: 70pcs
7mm: 70pcs
10mm: 70pcs
12mm: 70pcs
15mm: 70pcs
17mm: 70pcs
20mm: 70pcs
22mm: 70pcs
25mm: 70pcs
50mm: 70pcs
75mm: 70pcs
100mm: 70pcs
125mm: 70pcs
Package List:
840pcs* Jumper Wires
1*Storage Box
1* Tweezer
[Note]The breadboard wire is a little soft that convenient for changing its shape to do connect test.
9. Emakefun Terminal Expansion Adapter Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P with NRF2401+ Expansion Interface, DC Power Supply Interface (5PCS)
Feature
The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projectsThere are pins expansion hole for the NANO board, which can directly lead the pins; With DC power supply interface, you can directly add external power or battery to supply power
With NRF2401+ expansion interface, you can insert NRF2401+ to achieve wireless communication
Added a filter capacitor to enhance the stability of wireless communication
We used Immersion Gold Technology to make sure every board has more reliable quality.Size is about 2.6" x 2.0" x 0.3" (L* W* H)
Description
Use this dock to add extra connections to your Nano! It uses screw terminals so that you can be sure the connection is strong, and also use thicker/stranded wires. working very well for prototyping Arduino Nano projects.Package Included: 5 X Nano Terminal Expansion Adapter Board10. Keywish For Arduino Nano V3.0, ATmega328P Moudle Nano Board CH340 With USB Cable Compatible With Arduino Nano V3.0 (5pcs Nano Board & 1pcs Cable)
Feature
CH340G Replace FT232RL,so pls. use the driver from this link: https://github.com/keywish/arduino-nano-kitThe Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The Arduino Nano is a compact board similar to the UNO.The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Quick-responding technical support for free.
