It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 wired fire alarm pack. Its followed by an in-depth review of each wired fire alarm pack. Hopefully, once you are done reading this article, you will be well informed about wired fire alarm pack and be able to select the right wired fire alarm pack for you without any hesitations.
Best wired fire alarm pack
Rank
Product Name
Score
Related posts:
Best wired fire alarm pack reviews
1. Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning | Hardwired w/Battery Backup | Interconnectable | Model # KN-COSM-IBA
Feature
Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages.Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracketHumidity range:10%-95% relative humidity, non-condensing.Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
Peak Level Memory-Announces "CARBON MONOXIDE PREVIOUSLY DETECTED" if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions:- Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
Talking alarm announces the hazard type detected, helping to speed up reaction time
Combined carbon monoxide and smoke alarm, a single unit can be installed where previously two were needed
Battery safeguard ensures the unit cannot be accidentally mounted without batteries
Test-reset button tests alarm circuitry and triggers the voice announcement
Meets safety standards set by Underwriters Laboratories (UL) and interconnects with other KN-COSM-IBA models
120V AC, All Kidde brand hard wired smoke alarms are interconnectable with the KN-COSM-IBA
Description
This combination smoke/CO alarm features an 85dB horn and voice that announces "Fire", "Carbon Monoxide", and "Low Battery" warnings when detected. It can also interface with other Kidde interconnectable alarms. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm, Detection Method Ionization, Electrochemical, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-3/4 In., Height 1-3/4 In., Digital Readout No, Battery Backup Yes, Features Voice Warning, Peak Level Memory, Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes Mounting Anchors and Screws2. Google S3003LWES Nest Sensor Alarm-Smoke Carbon Monoxide Detector, 1, White
Feature
SAVE ENERGY WITH NEST: Nest introduces the 3rd generation Nest Learning Thermostat. With four beautiful colors to choose from and an easy to read display, this thermostat will help make your home not only smart but energy efficient. With just a few manual adjustments, the Nest Thermostat can learn your habits and start to save you money by automatically adjusting the temperature.READ THE DISPLAY FROM ACROSS THE ROOM: The Nest Thermostat does something new. It's called Farsight, and it lights up to show you the temperature, weather or time. You can even choose a digital or analog clock face. Farsight is big and bright on the beautiful display - you can see it from across the room.
A STYLE FOR EVERY HOME: The Nest Learning Thermostat now comes in four fantastic colors; Copper, Stainless Steel, Black, and White. Choose copper to add a warm touch. Stainless steel is perfect for a classic, versatile look. Black blends in with dark walls and stylish decor. And white looks great in simple, modern homes.
WORKS WITH NEST: Nest has worked hard to design thoughtful devices to help keep you safe and secure. Nest devices not only communicate with each other but also with the other smart devices around your home. Your Nest Secure can use your smart light bulbs to help get your attention in the event of an emergency; your smart washer and dryer can take the data from Nest and run the next load of laundry when energy demand is low. Look for the Works with Nest badge and let Nest handle the rest.
THERE'S NO PLACE LIKE A NEST HOME: We love home. It's the best place in the world. But not everything inside our homes is lovable. Some things beep at us; fail without warning; keep us in the dark. There are things we've learned to ignore. We think these things should do more. Nest is focused on making simple, human, delightful things. That's how we're creating the thoughtful home: A home that takes care of the people inside it and the world around it.
Know from anywhere: Connect Nest Protect to Wi-Fi and it will send an alert to your phone if the alarm goes off or the batteries run low.
Wireless:Working Wi-Fi connection: 802.11b/g/n @ 2.4GHz Wireless erconnect: 802.15.4 @ 2.4GHzWireless: Working Wi-Fi connection: 802.11b/g/n @ 2.4GHz Wireless Interconnect: 802.15.4 @ 2.4GHz Bluetooth Low Energy (BLE).Tells you what and where: It speaks up to tell you if there's smoke or CO and where the problem is, so you know what to do.
App Silence: Nest Protect is the first alarm you can hush from your phone. Simply walk to the Nest Protect that noticed the problem and open the Nest app.
Split-Spectrum Sensor: In an emergency, seconds count. Nest Protect uses two wavelengths of light to look for both fast and slow burning fires.
Heads-Up: Get a friendly voice alert so you can handle burning toast before it becomes a burning toaster.
10-year carbon monoxide sensor: Carbon monoxide is odorless, invisible and deadly. When there's CO, Nest Protect tells you where it's hiding.
Description
Its time to expect more from your smoke alarm. Nest Protect has been redesigned from the inside out. It has a Split-Spectrum Sensor, tests itself automatically and lasts up to a decade. Its also the first home alarm you can hush from your phone without any extra hardware required. And it tells you whats wrong and can even alert your phone. Nest products are made to work together. And they can even work with lights, locks and other products in your home. The Nest Protect can alert the Nest Thermostat when it detects carbon monoxide and the Thermostat can turn off the furnace to try and reduce the leak while you get to safety. Nest is focused on making simple, human, delightful things. Thats how were creating the thoughtful home: A home that takes care of the people inside it and the world around it.3. UHPPOTE 9-28VDC Conventional Manual Call Point Fire Reset Push In Pull Down Emergency Alarm Station Dual Action
Feature
Non UL ListedKey lock available; Dual Action
The HC102 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches
Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.
Note: All wiring must conform to applicable local codes, ordinances, and regulations.
Description
Operation:
The manual call points provide a textured finger-hold area that includes Braille text. In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people.
Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.
Resetting the station is simple: insert the key, twist one quarter-turn, then open the station's front cover, causing the spring-loaded operation handle to return to its original position. The alarm switch can then be reset to its normal(non-alarm) position manually(by hand) or by closing the station's front cover, which automatically resets the switch.
Loop design and wiring:
The fire alarm control panel Zone wire can be connected to terminal loop(+), loop(-) unpolarized wire.
If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal loop(+),loop(-).
Installation:
Note: All wiring must conform to applicable local codes, ordinances, and regulations.
Mounting indoor wall
Attach mounting base to wall at 1.5 meter's(59in) high
Connect field wiring to terminals
To attach product to mounting base
Secure product by tightening the one mounting screws in the front of the product housing.
Specifications:
Non UL Listed
Operating voltage range: 9-28VDC Volts
Alarm resistance: 470ohm/1W
Operating humidity range: 10% to 93% relative humidity, non-condensing
Operating temperature range: -10~50 (14~122)
Dimensions (LxWxH): 140x104x45mm / 5.51"x4.09"x1.77"
Net Weight: 220g / 0.44lb
Package:
1 x Fire alarm call point
2 x Keys
1 x English manual
4. First Alert BRK SC9120B Hardwired Smoke Detector and Carbon Monoxide (CO) Detector with Battery Backup
Feature
Keep your family safe with this hardwired smoke and carbon monoxide alarm; the battery backup means constant monitoring, even if there's a power failureFeatures an electrochemical Carbon Monoxide sensing technology as well as an ionization sensor that detects the fine particles of a fast-burning fire
Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection
Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
Simple to use, with a single test/silence button, and side-load battery compartment; tamper-resistant locking brackets and universal mounting brackets make installation easy
Rigorously tested to meet UL standards
Description
This First Alert SC9120B Hardwired Smoke and Carbon Monoxide Detector includes a 9-volt battery backup that continues to protect you in the event of a power failure. The alarm features electrochemical CO sensing technology, an ionization sensor for smoke detection, and an 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke or carbon monoxide. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it's time to replace the unit. Easliy connect it to compatible BRK or First Alert alarms within a single-family residence; connecting will sound all the alarms together.5. First Alert BRK9120b6CP Hardwired Smoke Detector with Backup Battery
Feature
Tamper resistant locking pins, single button silence/test and loud 85dB alarm120-Volt AC power with 9-Volt battery backup (included) to keep alarm functioning during power outage
Open mounting design for easy installation with side load battery compartment for quick replacement and interconnectable up to 18 units (12 smoke, 6 CO/heat/relay)
10-Year limited warranty
Description
NOTE:The product is a hardwired alarm, also confirm if the wiring polarity is correct and that all wire nut connections are secure. A loose neutral (white wire) connection within the home junction box could prompt a device malfunction. Promote greater household safety with the First Alert 9120B Hardwired Smoke Alarm with Battery Backup. This 120-volt AC smoke detector uses an ionization smoke sensor to reliably detect smoke from hot, fast-flaming fires and alerts you with a loud 85-decibel alarm. Designed to be wired directly into your home's electrical system, this hardwired smoke detector features a backup battery that helps keep the alarm functioning even in the event of a power outage. The gasket-less mount helps ensure a perfect alignment for easy installation, while tamper-resistant locking pins keep the alarm secure. And thanks to the convenient test/silence button, you can easily check whether the alarm is functioning properly and mute false alarms. This smoke alarm can integrate with up to 12 other First Alert or BRK hardwired alarms and features a latching indicator that identifies which unit triggered the alarm.6. First Alert BRK 7010B Hardwire Smoke Alarm with Photoelectric Sensor and Battery Backup, 2 Pack
Feature
2 Pack of First Alert BRK 7010B Hardwire Smoke Alarm with Photoelectric Sensor and Battery Backup120-volt hardwired smoke alarm wires directly into your home's electrical system
Photoelectric sensor detects smoke from smoldering fires while minimizing false alarms
Universal mounting bracket and plug-in power connector for hassle-free installation
Equipped with Optipath 360 for more comprehensive detection
Description
Product DescriptionThe First Alert BRK 7010B hardwire photoelectric smoke alarm with battery backup is a hardwire 120V single or multiple station smoke alarm designed for residential home use and institutional locations such as hospitals, hotels, motels, dormitories and other multiple family dwellings. This alarm is inter-connectable and can be installed and linked with up to 18 compatible devices (up to 12 smoke alarms and 6 compatible devices like bells, horns and repeaters) so that when one triggers, all alarms sound. The First Alert BRK 7010B emits loud 85dB audible alarm. The alarm also features a photoelectric smoke sensor, which is particularly effective at detecting slow smoldering fires. The Frist Alert BRK 7010B hardwire smoke alarm with battery backup is packed with convenient features. The single test/silence button silences a non-threatening alarm or low battery warning; plus allows you to test the unit's functionality quickly. The latching alarm indicator will automatically identify which unit initiated the alarm if alarms are installed in a series - helping identify the initial location and source of an incident. The smoke detector also includes an optional drawer and mounting bracket lock to prevent tampering or removal of the 9-volt battery. End of life signal provides audible notice when the alarm needs to be replaced after 10 years of service. This alarm is backed by a 10 year limited warranty and is tested to meet UL standards 217. Includes smoke alarm, mounting bracket, 9-volt backup battery and user's manual.
The BRK hardwire smoke alarm with photoelectric sensor is designed to reduce common "nuisance" alarms. It's an excellent choice for installations in or near kitchens, near fireplaces, or in hallways directly outside bathrooms, utility rooms, or other areas prone to steam. This alarm is also a popular choice for hotel/motel applications.
7. Kidde i12060 Hardwire with Front Load Battery Backup Smoke Alarm, 1 Pack, White
Feature
Easy Installation - Front battery pull tab allows battery activation without removing alarm from mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut gripFewer Callbacks - Front battery door makes replacing the battery easy for anyone. One button design for easy operation and less confusion. Operates HushTM and alarm test. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp. Dust cover protects sensor from contaminates during construction reducing nuisance alarms
User-Friendly Features - Tamper resist locking feature deters alarm theft. Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system. Battery backup provides protection in case of power failure
Interconnectable - Connect up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user's guide for complete instructions
Front-loading battery door allows you to change the battery without removing the alarm from mounting bracket
Description
The Kidde i12060A is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 10-year limited warranty. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Part Number (Ordering Number): 210063768. UHPPOTE Wired 12/24VDC Sound and Light Fire Alarm Warning Strobe Siren Horn Sound Alert Safety System Sensor
Feature
Non UL listedThree different tones, you can choose any one of them according to your need.
Super loud sound, the alarm volume over or equal to 105dB
Built-in 6pcs LEDs,super bright when send out alarm signal,effectively remind people flee from fire
The Sound-light Fire Alarm apparatus are one kind terminal device for alarm, it is fit for the sound & light alarm when the fire happens.
Description
Purpose:
The Sound-light Fire Alarm apparatus are one kind terminal device for alarm, it is fit for the sound & light alarm when the fire happens.
Trait:
Selects two wire system wiring method, the main line end receives two main lines, power source termination to 12/24VDC power line.
Three different tones, you can choose any one you like.
Built-in 6 pcs LEDs,super bright when send out alarm signal,effectively remind people flee from fire.
The siren will send out both loud sound and quick flash light to remind people escape from the fire.
Technical Specifications:
Non UL listed
Material: ABS
Temperature Range: -10~50 / 14~122
Humidity Range: 95%RH
Operating Voltage: 12/24VDC
Working Current: 20mA / 50mA
Flash Intensity: 1.2Ws
Flash Period: 1.5S
Audio Alarm: 105Db
Life of Flash Light: 40000 (Time)
Provenience of Sound Alarm: Three kinds ( I Ambulance sound; II Sound of police car; III Sound of fire engine)
Dimensions: 134(L)x115(W)x48(H)mm / 5.3(L)x4.5(W)x1.9(H)in
Package weight: 250g / 0.55lb
Installation:
I. At first, get into two hole well in the install place(wall), the hole distance is 65mm/2.56in, installs the plastics and swells Stopper, (if the wall is the wooden material, can be by attacking the screw and fastening by oneself directly).
II. Connect 12/24VDC power and network link, and set up a kind of alarm sound well according to the need.
III. Specialize in screw by oneself with two, fix the alarm to install in the place, tighten the screw alarm.
Package:
1 Sound-light fire alarm
2 x Screws
Note:
Alarm host not included, need buy sepeate
9. Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning | Hardwired w/10 Year Lithium Battery Backup | Interconnectable | Model # i12010SCO
Feature
Provides Protection from Two Hazards - Fire and CO in one unit with 10-year sealed lithium battery backup.Sealed-In Lithium Battery Backup - No battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
Voice Warning System - Verbally announces "FIRE!" or "WARNING! CARBON MONOXIDE" to help distinguish between threats.
Ionization Sensing Technology - Ideal for detecting fast flaming and other types of fires. Temperature Range : 40 degree F (4.4 degree C) to 100 degree F (37.8 degree C)
Hush Feature - Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.
Description
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarms overall performance in all fires, and significantly reduces the potential for a nuisance alarm.10. First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Battery Operated, SCO5CN
Feature
Combination smoke detector/carbon monoxide alarm detects two threatsBattery-operated unit installs quickly and easily without an electrician
Photoelectric sensor detects smoke while minimizing false alarms. 2 AA batteries included. EZ access battery drawer, no need to remove alarm from ceiling to change battery
Electrochemical CO sensor alerts you to carbon monoxide danger
A single button tests the unit or silences the alarm. Low battery signal mute, quiets low battery signal for up to 8 hours
