Shopping smoke and carbon monoxide detector has never been easy. You may come many of website, read smoke and carbon monoxide detector reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.

Best smoke and carbon monoxide detector

Related posts:

Best smoke and carbon monoxide detector reviews

1. First Alert ZCOMBO 2-in-1 Smoke Detector & Carbon Monoxide Alarm, CO

Feature

Z-wave compatible smoke and carbon monoxide alarm. First Alert Z-Wave Detector - NOT WINK compatible
Integrated wireless alarm system is Iris compatible to send you mobile alerts and emails. The alarm is also compatible with 3rd party certified z-wave devices with the First Alert protocol. Note- this alarm is not compatible with Onelink. Wireless connection to z-wave hub (not included)
Reliable electrochemical co and photoelectric smoke sensors
Features single button test/Silence and side-access battery drawer
Meets UL standards and backed by 7 year limited warranty
Certified for use with Nexia Home Intelligence or other Z-Wave systems
Combination Smoke and Carbon Monoxide protection that alerts you whether you are home or away
Photoelectric smoke sensor helps reduce false alarms such as from cooking or shower steam

Description

The First Alert ZCOMBO-G is a z-wave protocol smoke and carbon monoxide combination alarm. This battery operated alarm will operate with 3Rd party, certified z-wave Devices enabled with the First Alert protocol and the basic Command class required by all z-wave Devices. By the requirements of the device class Spec, this Command class does not have to be mapped to any particular functionality for this device. The alarm supports one association group with up to 1 node, and sends its alarms to that group. Note: this alarm is not compatible with onelink.

2. Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning | Hardwired w/Battery Backup | Interconnectable | Model # KN-COSM-IBA

Feature

Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages.Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracket
Humidity range:10%-95% relative humidity, non-condensing.Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
Peak Level Memory-Announces "CARBON MONOXIDE PREVIOUSLY DETECTED" if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions:- Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
Talking alarm announces the hazard type detected, helping to speed up reaction time
Combined carbon monoxide and smoke alarm, a single unit can be installed where previously two were needed
Battery safeguard ensures the unit cannot be accidentally mounted without batteries
Test-reset button tests alarm circuitry and triggers the voice announcement
Meets safety standards set by Underwriters Laboratories (UL) and interconnects with other KN-COSM-IBA models
120V AC, All Kidde brand hard wired smoke alarms are interconnectable with the KN-COSM-IBA

Description

This combination smoke/CO alarm features an 85dB horn and voice that announces "Fire", "Carbon Monoxide", and "Low Battery" warnings when detected. It can also interface with other Kidde interconnectable alarms. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm, Detection Method Ionization, Electrochemical, Up to 24 Units Interconnection Capability, Power Source 120VAC, 9V, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-3/4 In., Height 1-3/4 In., Digital Readout No, Battery Backup Yes, Features Voice Warning, Peak Level Memory, Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes Mounting Anchors and Screws

3. First Alert BRK SC9120B Hardwired Smoke Detector and Carbon Monoxide (CO) Detector with Battery Backup

Feature

Keep your family safe with this hardwired smoke and carbon monoxide alarm; the battery backup means constant monitoring, even if there's a power failure
Features an electrochemical Carbon Monoxide sensing technology as well as an ionization sensor that detects the fine particles of a fast-burning fire
Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection
Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
Simple to use, with a single test/silence button, and side-load battery compartment; tamper-resistant locking brackets and universal mounting brackets make installation easy
Rigorously tested to meet UL standards

Description

This First Alert SC9120B Hardwired Smoke and Carbon Monoxide Detector includes a 9-volt battery backup that continues to protect you in the event of a power failure. The alarm features electrochemical CO sensing technology, an ionization sensor for smoke detection, and an 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke or carbon monoxide. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it's time to replace the unit. Easliy connect it to compatible BRK or First Alert alarms within a single-family residence; connecting will sound all the alarms together.

4. First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Battery Operated, SCO5CN

Feature

Combination smoke detector/carbon monoxide alarm detects two threats
Battery-operated unit installs quickly and easily without an electrician
Photoelectric sensor detects smoke while minimizing false alarms. 2 AA batteries included. EZ access battery drawer, no need to remove alarm from ceiling to change battery
Electrochemical CO sensor alerts you to carbon monoxide danger
A single button tests the unit or silences the alarm. Low battery signal mute, quiets low battery signal for up to 8 hours

Description

The First Alert SCO5CN Combination Smoke and Carbon Monoxide Alarm detects both smoke and carbon monoxide in a single device with its dual permanent sensors. This carbon monoxide and smoke detector is battery operated, allowing you to easily install it without requiring an electrician. A photoelectric sensor detects the smoke most commonly produced by smoldering fires and minimizes false alarms from cooking smoke or shower steam. The advanced electrochemical CO sensor detects carbon monoxide leaks from multiple sources, such as faulty fuel-burning appliances, blocked chimneys, and generators running inside or too close to homes. Requiring just two AA batteries and featuring an easy-access battery compartment for quick changes, this smoke and carbon monoxide detector has unique alarm sounds and indicator lights on its face that distinguish a smoke warning from a carbon monoxide warning. A single button allows you to silence a false alarm or test the unit.

5. Kidde Smoke & Carbon Monoxide Detector, Battery Powered, Combination Smoke & CO Alarm, Voice Alert

Feature

Battery Safeguard with Front Load Battery Door - Quick and easy battery replacement.AA batteries required (best with Polaroid AA batteries)
Smart 2-in-1 Voice Alarm - Voice announces "Fire!" or "Warning! Carbon Monoxide"
Smart Hush - Nuisance alarms are silenced by pressing the hush button.
Test/Reset Button, LEDs, and Low Battery Warning. Temperature Range: 40F (4.4C) to 100F (37.8C)
Meets Underwriters Laboratories (UL) UL2034 and UL217 compliance. Note: Refer the User Guide before use.

Description

The Kidde KN-COSM-BA battery-operated carbon monoxide and smoke alarm combines two important safety devices into a single unit.

This alarm includes a voice warning system that makes four announcements: fire, carbon monoxide, low battery, or smart hush activation. The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit uses three AA batteries, protecting you and your family even during a power outage. This alarm uses ionization-sensing technology for the smoke alarm. Ionization-sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric-sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home.

KN-COSM-BA Battery-Operated Combination Smoke and CO Alarm at a Glance Employs both smoke and carbon monoxide sensors Stand-alone battery-operated alarm is easy to install throughout the home, as no wiring is needed Features a hush button to silence the alarm for non-emergency situations like a smoky dinner Voice alarm eliminates confusion and clearly warns of smoke/CO danger or low battery Protects from two different hazards, smoke and carbon monoxide, and has a different voice warning for each hazard.

The battery-operated KN-COSM-BA offers easy installation.

Combination Smoke/Carbon Monoxide Alarm The Kidde combination carbon monoxide and smoke alarm includes a voice warning system that eliminates confusion and clearly warns you and your family of a smoke or carbon monoxide (CO) danger, of low battery, or of hush-mode setting.

Alarm Warnings Fire:

The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message: "Fire! Fire!" The alarm will repeat the pattern until smoke is eliminated.

Carbon Monoxide:

Four short alarm beeps followed by a verbal warning: "Warning--carbon monoxide!" This continues until the unit is reset or the CO is eliminated.

Low Battery:

One chirp followed by warning: "Low battery." The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour, the red LED light will flash once every minute and will be accompanied by the chirp sound. The low-battery warning will only sound once every 15 minutes.

Voice Hush Indication:

"Hush activated" and "Hush canceled" voice announcement. Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher when the test/reset button is pressed, the unit will announce, "Carbon monoxide previously detected" to warn of the CO incident. Trademarked Hush Feature for Convenience By pressing the hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately 10 minutes. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce, "Hush mode activated," and the green LED will flash every two seconds for approximately 10 minutes.

Reliable Battery Power, Indicator LED, Test Feature and Low-Battery Warning The battery-powered alarm provides continuous protection, even during power outages. Because this alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly.

For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn. If any form of battery failure is detected, the red LED light will flash and the unit will chirp one time, followed by the warning message, "low battery." This cycle will occur once every minute, and will continue for at least seven days. Seven years after initial power up, this unit will chirp" every 30 seconds.

This is an operational end-of-life feature that will indicate that it is time to replace the alarm. UL 2034, the independent standard applicable to CO alarms, requires CO alarms to have an end-of-life warning. This requirement went into effect in March 2007, meaning any CO alarm manufactured after April 2007 with a UL listing must have this feature. Most states that require CO alarms in residential dwellings mandate that the alarm meet the UL 2034 standard.

The unit measures just 5.75 inches in diameter and 1.7 inches deep, and it features a neutral white finish. It includes tamper-resistant features to deter vandalism or theft. This combination smoke/CO alarm is UL listed, so you can be confident of its quality, and it is backed by a ten-year limited warranty.

About Kidde:

A UTC Fire and Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb detector lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box:

Combination smoke and carbon monoxide alarm with mounting bracket and mounting hardware, three AA batteries, a and bilingual (English/Spanish) user's manual.

6. Combination Smoke and Carbon Monoxide Detector with Display, Battery Operated Smoke CO Alarm Detector (White-001)

Feature

Combination Smoke Detector and Carbon Monoxide Detector Can Detect the threat of these Two Gases.
Carbon Monoxide Detector alarm Using High accurate Electrochemical Sensor, alerts you to Carbon Monoxide Danger.
Photoelectric Sensor Detects Smoke, Smoke Detector While Minimizing false alarms.
Smoke CO Detector Operated unit installs quickly and easily without an electrician at home or bedroom.
LCD display concentration PPM, real-time monitoring to protect your safety

Description

PRODUCT FEATURES:
High accurate electrochemical sensor and infrared photoelectric sensor
LCD display concentration PPM
3*1.5V AA battery ( package not include)
Ultra-long standby time, low current consumption
Low-battery warning
Alarm memory function
pause(Hush Mode)
Sound & Flash Alarm & LED indicating Alarm
Temperature: 0-50
Relative Humidity: 10-95%
Alarm indication: LCD display, Light/sound prompt
Battery capacity: low battery alarm
Dimensions:4.09*1.53in

7. 2 Pack Combination Smoke and Carbon Monoxide Detector Battery Operated, Travel Portable Photoelectric Fire&Co Alarm for Home, Kitchen

Feature

Combo smoke detector/carbon monoxide alarm detects two threats
Electrochemical CO sensor alerts you to carbon monoxide danger
Photoelectric sensor detects smoke while minimizing false alarms
Battery-operated unit installs quickly and easily without an electricianA single button tests the unit or silences the alarm. Low battery signal mute, quiets low battery signal for up to 8 hours
5 YEARS WARRANTY

8. Smoke and Carbon Monoxide Detector Combo, with Sound Warning and Number Display Battery Powered Smoke CO Alarm Detector

Feature

Combination Smoke Detector and Carbon Monoxide Detector Can Detect the threat of these Two Gases.
ared Photoelectric Sensor Detects Smoke, Smoke Detector While Minimizing false alarms.
Carbon Monoxide Detector alarm Using High accurate Electrochemical Sensor, alerts you to Carbon Monoxide Danger. insurance Safety of your life.
The Battery - powered Smoke CO Detector Can be installed Quickly and Easily. You Can Hear the low power alarm When the Power is Close to Run out, and won't Miss the Chance to Change the New Battery.
Suitable for all the Place Possible to Produce Carbon Monoxide , Such as your Home Kitchen, Bedroom, Bathroom, Hotel. Also Useful When you are Enjoying the Barbecue, Using Charcoal Warm yourself, or Putting it in your Parking Garage, etc.

Description

As the only US Based Retailer of this item, We have a Chemist on Staff to answer any Technical Questions. We also Give e-books about Tips to Help Prevent Carbon Monoxide Poisoning and How to Escape a Burning Building.
This Combination CO/Smoke Carbon alarm features an 85dB/3m Horn and Voice that announces "Fire", "Carbon Monoxide", and "Low Battery" Warnings When Detected.
Meets NFPA 72 standards / UL Standards Smoke and Carbon Monoxide Alarm, Detection Method Lonization, Electrochemical, Up to 24 Units Lnterconnection Capability, Audible Alert 85dB @ 10 ft., Horn, Visual Alert Red LED, Diameter 5-3/4 In., Height 1-3/4 In., Digital Readout Yes, Battery Backup Yes, Features Voice Warning, Peak Level Memory, Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Includes Mounting Anchors and Screws
Features:
* Battery low Voltage tips
*Test & Reset Button
* Lnfrared Photoelectric Sensor
*3 Color lights for Different alarm State
* Sound and Light alarm / LED indication alarm
* SMT industry, Strong Stability
* Dust, Pest Control, anti-White light interference Design
MCU automatic Processing Technology to improve Product Stability
Technical Parameters
Working Power: 3V Battery (Three AA 1.5V) Package not include
Quiescent Current: <8uA
Alarm Current: <35mA
Sensitivity: 2.06% / ft 1.3
Alarm indication: red LED flashes
Alarm sound pressure: 85dB / 3m Department
Operating temperature: -10 ~ +50
Relative Humidity:10%-95%RH
Dimensions: 104x39mm
Executive Standard: GB4715-2005; En14604
Alarm indicationCO: Red light flash and Buzzer
Smoke: Bule light Flash and Buzzer
Coverage Area: When the Space Height is 6m-12m, the Protective area of one Detector is 80m2
for the General Protection Site and 60m2 for the Space Height of 6m or Less.

9. Smart Combination Smoke and Carbon Monoxide Detector Alarm Battery Operated Digital Display for Travel Home Bedroom and Kitchen

Feature

2-in-1 Accurate, Reliable & Highly Sensitive Alarm: Equipped with both photoelectric smoke sensor and electrochemical CO sensor that work independently of each other; every second counts; detects both fast and slow-burning fires, and instantly notifies you when dangerous smoke or CO concentration is detected while minimizing false alarms; provides the ultimate protection from 2 deadly threats, all contained in 1 unit
LCD Display: Clearly indicates real-time carbon monoxide (CO) concentration in the surrounding air, as well as the remaining battery life and working status of the alarm
Test/Silence Button: Tests the unit for proper operation and resets the smoke and carbon monoxide alarm, Alarm Volume: Loud > 85dB(A) at 1 meters. Loud 85-decibel alarm is designed to be heard easily. Pls kindly press if false alarm.
Easy Install and Use: The alarm can easily install with mounting bracket. No hardwired anymore, very convenient to install at home or bedroom - wall mount, screws included.
Safety and 5 year Warranty: Low battery signal alarm and "end of life"warning ensures the detector can work normal. Environment friendly, without smell, radiation or harm. If any problem, contact with us without hesitation, we will reply to you asap.

10. Combination Photoelectric Smoke Alarm and Carbon Monoxide Detector, Protect Your Home from Fire and Gas Leaks, Even When You're Away, 9V Battery Operated (Two Pack)

Feature

Combination Smoke Detector and Carbon Monoxide Detector Can Detect the threat of these Two Gases
SOUND AND LIGHT ALARM --- When a dangerous level of carbon monoxide is detected the red light will flashes and a loud alarm pattern will sound--Loud 85 decibel carbon monoxide alarm with red light flash to protect your family's life and property safety from CO detector
ENERGY SAVING --- Operated by 9V Batteries, You can hear the alarm when the power is lowdon't worry about when to replace the battery
APPLICATION CO DETECTOR PLACE---This carbon monoxide detector suitable for all where it is possible to produce carbon monoxide, such as your home kitchen, bedroom, bathroom, hotel, or you are in the barbecue time, your parking garage
WHAT YOU GET --- Smoke and Carbon Monoxide Detector,5 years Warranty

Description


This combination smoke/CO carbon alarm features an 85dB horn when detected. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm, Electrochemical, Audible Alert 85dB @ 10 ft., Horn,Reset Button, Hush Button Yes, Locking Pin Yes, Operating Temp. 40 Degrees to 100 Degrees F, Standards UL, Includes Mounting Anchors and Screws

Features:
* Battery low voltage tips
*Automatic reset
* Sound and light alarm
* SMT industry, strong stability
* MCU automatic processing technology to improve product stability

Technical Parameters

Working power: 9V batteryincluded
Quiescent current: <8uA
Alarm current: <35mA
Sensitivity: 2.06% / ft 1.3
Alarm sound pressure: 85dB / 3m Department
Operating temperature: -10 ~ +50
Relative humidity: 95% RH
Dimensions: 105 * 38mm
Executive Standard: GB4715-2005; En14604; UL217
Coverage Area: When the space height is 6m-12m, the protective area of one detector is 80m2 for the general protection site and 60m2 for the space height of 6m or less.

Conclusion

All above are our suggestions for smoke and carbon monoxide detector. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using smoke and carbon monoxide detector with us by comment in this post. Thank you!
Harriet Collins