It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 fiber media converter multimode lc. Its followed by an in-depth review of each fiber media converter multimode lc. Hopefully, once you are done reading this article, you will be well informed about fiber media converter multimode lc and be able to select the right fiber media converter multimode lc for you without any hesitations.
Best fiber media converter multimode lc
Related posts:
Best fiber media converter multimode lc reviews
1. TP-Link Gigabit Ethernet Media Converter, 1000Mbps RJ45 to 1000M Multi-Mode SC Fiber (MC200CM)
Feature
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port Supports auto MID/MID-X for TX portProvides switch configuration of Force /Auto transfer mode for FX port Extends fiber distance up to 0.5km
Easy-to-view LED indicators provide status to monitor network activity easily External power supply
Standards and Protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Ports: 1x 1000M SC port; 1x 1000M RJ45 port (Auto MDI/MDIX)
Basic Function: Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance upto 0.5km using 50/125um fiber Extends fiber distance upto 0.22km using 2.5/125um fiber
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports auto MDI/MDIX for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
Extends fiber distance up to 0.5km(0.31 miles)
Easy-to-view LED indicators provide status to monitor network activity easily
External power supply
Description
TP-Link MC200CM Gigabit Ethernet Media Converter2. StarTech.com Multimode (MM) LC Fiber Media Converter for 10/100/1000 Network - 550m - Gigabit Ethernet - 850nm - with SFP Transceiver (MCM1110MMLC)
Feature
Convert and extend different networks over a Gigabit fiber cable connection up to 550m / 1804 ftGigabit Ethernet fiber media converter with SFP transceiver
Compact design / Copper ethernet to fiber media converter
Supports 10/100/1000 Mbps networks / Gigabit media converter for cost-effective network extension
850nm LC multimode Gigabit fiber connection / 550m range on fiber optic interface
With auto MDIX / Metal housing
Link Fault Pass (LFP) supported / 9K Jumbo Frame supported
Description
Convert and extend a Gigabit Ethernet connection up to 550m over multimode LC fiber - This fiber media converter offers an easy, cost-effective way to extend your network over Gigabit fiber. It is equipped with a multimode transceiver which converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances or connect workstations to switches. The converter provides a powerful extended networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access. Cost-effective extension and dependable performance The Gigabit Fiber Media Converter provides a cost-effective and dependable solution for shorter range network extensions. It connects an Ethernet network to remote devices over a fiber backbone, with a 550m range on the fiber optic interface. The media converter has a durable metal housing, engineered to deliver long-lasting performance. Versatile connections for broad compatibility Fully compatible with10/100/1000Base-T Ethernet networks, thefiber media converter supports auto negotiation to bridge different speed networks and devices to a Gigabit fiber network.It provides versatile connectivity to your existing networks and devices, allowing you tomaximize the usage and performance of legacy equipment. The multimode transceiver is removable, giving you the flexibility to change your transceiver in the future to meet your networking needs. Easy installation and compact convenience The unmanaged fiber media converter has a standalone design with simple plug-and-play set-up to ensure fast and easy installation. Compact in size, the converter gives you flexible installation options - including a wall mounting option to save space. The MCM1110MMLC is backed by a StarTech.com 2-year warranty and free lifetime technical support.3. Gigabit Ethernet Multi-Mode LC Fiber Media Converter (SFP SX Transceiver Included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX
Feature
Optical Port: 1.25Gbps, 850nm wavelength, Dual LC fiber, support Gigabit EthernetRJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports working temperature range from 0C to 60C
Description
ipolex's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.Main Features:
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 80KM (singlemode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes
Optical Port:
1550nm singlemode
Connectors: LC connector
TX Power (dBm): 0~4
Rx Sens. (dBm): < -25
Ethernet Port:
Connectors: RJ-45 Connector
LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps, else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP, light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active, light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off
Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C
Warranty:
2 years
4. Gigabit Ethernet Media Converter, Single Mode Dual SC fiber, 1000Base-LX to 10/100/1000Base-Tx, up to 20km, Pack of 2
Feature
Optical Port: 1.25Gbps, 1310nm wavelength, Dual SC fiber, support Gigabit EthernetRJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports wide temperature range from 0C to 60C
Description
10Gtek's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter.
The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.
Main Features:
Complies with IEEE 802.3, IEEE 802.3u,IEEE802.3z,IEEE802.3ab,IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 20km (single mode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes
Optical Port:
1310nm Single mode
Connectors: SC connector
EthernetPort:
Connectors: RJ-45 Connector
LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps,else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP,light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active,light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off
Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm(D x W x H)
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C
Warranty:
2 years
5. Gigabit Ethernet Media Converter, Singlemode LC Fiber, a Pair of 10/100/1000M Gigabit Ethernet Media Converter with a Pair of BiDi SFP LX Modules (1310/1550nm, 20km)
Feature
Smart management simplex LC fiber optical port: 1.25Gbps, 1310/1550nm wavelength, support Gigabit Ethernet; RJ45 port: 10M/100M/1000M, supports full/half duplex auto-negotiation and MDI/MDIX auto-crossover.High-quality and widely compatibility with quall Comma QCA8334 chip to ensure stability and ultra-low Time-Delay data transmission. Complies with IEEE 802.3/802.3U/802.3Z/802.3ab, 10/100/1000baset-tx/FX. Supports jumbo frame Size 9K byte.
Easy Installation and use modulation configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX Link/Act, power, FDX can dynamic feedback Link connection State and fault detection to easily monitor network status.
Compact design only 9.3 cmx 7.1cm x 2.7cm (3.7"X 2.8"X 1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space.
What you get 2x SFP Gigabit Ethernet media converter, 1x pair of Bidi SFP LX modules, 2x DC power adapter, 1x product manual. 30-Day money-back guarantee with 1 Year and lifetime Tech Support.
Description
A7S2-33-1GX1GT-SFP Media Converter is use to expanding existing Gigabit Ethernet networks like 1000Base-TX/FX networks. Extra distances are possible with 2pcs free Bidi SFP LX Transceiver delivering up to 20km. Package: 2x 10/100/1000M Gigabit Ethernet Media Converter 1x Bidi SFP LX Transceiver,Tx1310/Rx1490nm, 20km 1x Bidi SFP LX Transceiver,Tx1490/Rx1310nm, 20km Features: Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M Auto MDI/MDI-X support on RJ-45 port Support Full Duplex and Half Duplex Specifications: Transceiver: Data Rate: .................................................1.25Gb/s Form Factor: ..............................................SFP Wave Length: .............................................Tx1310 / Rx1490nm, Tx1490 / Rx1310nm Reach: ......................................................20km Fiber Type: ................................................SMF, single LC Fiber Converter: Input voltage: ...............................................5VDC Interface: ....................................................1x RJ45, 1xSFP Dimension: .................................................93 x 71 x 27mm(D x W x H) Operating Temperature: ...............................0C to 60C Storage Temperature: ..................................-20C to 70C : ...................................................2 years6. Gigabit Fiber Media Converter Single-Mode LC (SFP LX Transceiver Included), up to 20KM, 10/100/1000Base-Tx to 1000Base-LX
Feature
Optical Port: 1.25Gbps, 1310nm wavelength, Dual LC fiber, support Gigabit EthernetRJ45 Port: UTP CAT5 10M/100M/1000M, Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status
Supports jumbo frame size 9K bytes; Supports working temperature range from 0C to 60C
Description
ipolex's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.Main Features:
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 80KM (singlemode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes
Optical Port:
1550nm singlemode
Connectors: LC connector
TX Power (dBm): 0~4
Rx Sens. (dBm): < -25
Ethernet Port:
Connectors: RJ-45 Connector
LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps, else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP, light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active, light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off
Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C
Warranty:
2 years
7. Multimode Gigabit Fiber Media Converter - Built-In Fiber Module 2 km (1.24 miles) SC - to UTP Cat5e Cat6 10/100/1000 RJ-45 - Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support
Feature
AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed And Extends in over Multi Mode Fiber to up to 2 kmNO MORE Integration Hassles, simply plug in Ethernet cable to any Ethernet port, whatever speed it is!
SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance
PLUG & PLAY - Simply plug in optical port and UTP port, and it will work immediatelly
FREE UTP patch cable in set!
Description
Extend your Gigabit or Fast Ethernet Network Over Multi Mode Fiber Up to 2 km With Ease
AN-UMG-MM-AS-1310J Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port - You just need plug in the cables and it will work right away!
Powering it up? Easy, it will come with AC power adapter in set, just plug it!
All These Important Features Are All Supported:
- Compliant with IEEE 1000Base-T and 1000Base-SX
- One 10/100/1000Base-T RJ-45 port autosensing featured
- One 1000Base-SX Multi Mode Dual Fiber port Port with SC type connector - up to 2 km distance
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-SX
- Power supply: 100 to 240VAC 50 to 60Hz
- Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)
- Environment: Relative humidity; 5% to 90%
- Operating temperature: 0 to 70 degree celsius
- CE, FCC, ROHS, LVD certified
- Supports Jumbo Ethernet frames up to 9000 bytes (if needed, configurable by dip switches)
- Supports LLF feature - Link Loss Feature - (if needed, configurable by dip switches)
- Compliant with IEEE 1000Base-T and 1000Base-SX
- One 10/100/1000Base-T RJ-45 port autosensing featured
- One 1000Base-SX Multi Mode Dual Fiber port SFP type Port with LC type connector - up to 550 m (0.34 miles) distance
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-SX
- Power supply: 100 to 240VAC 50 to 60Hz
- Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)
- Environment: Relative humidity; 5% to 90%
- Operating temperature: 0 to 70 degree celsius
- CE, FCC, ROHS, LVD certified
- Supports Jumbo Ethernet frames up to 9000 bytes (if needed, configurable by dip switches)
- Supports LLF feature - Link Loss Feature - (if needed, configurable by dip switches)
- Supports Jumbo Ethernet Frames up to 9000 bytes;
- Supports QinQ and VLAN's - MTU size big enough to pass them through;
- One 1000Base-LX Single Mode Single Fiber port Port with LC type connector - up to 20 km (12.24 miles) distance using 1310nm/1550nm wavelengths
- One 10/100/1000Base-T RJ-45 port Autosensing featured - adapts to all 3 speeds!
- Compliant with IEEE 10/100/1000Base-T and 1000Base-LX WDM BiDi
- Connect it to Gigabit or Fast Ethernet ports or even 10Mbps ports
- When used standalone (paired with other devices), be sure to check that wavelengths match - 1310/1550 nm for A side & 1550mm/1310nm for B side used in these converters.
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Transmission Wavelength - 1310/1550 nm & 1550/1310nm Fiber Connector Type: SC Simplex PC/UPC
- Power supply: 100 to 240VAC 50 to 60Hz, US type power plug
- Dimensions: 70.5mm - 2.77in - (L) X 94mm - 3.7in (W) X 26.5mm - 1.04in (H)
- Environment: Relative humidity; 5% to 90%
- Operating temperature: 0 to 70 degree Celsius (32 - 158 F)
- Supports LLF feature - Link Loss Feature
- Supports Jumbo frame (if needed, configurable by dip switches)
Media converter will extend Your LAN network with any standard Ethernet interface to distances with 2 km or less - you no need to use attenuator also for significantly less distances than 2 km as well.
Setup of these units are really easy as the 3 steps shown in picture gallery, and all default settings will work for all of your cases, but for sophisticated users we had created some more customized settings available via dip switches on unit's back panel.
It's always good to have versatile and adaptive unit to all Your cases!
Questions during installation? Questions during considering a purchase? We are always here to answer You and guide You through!
8. Gigabit Ethernet Media Converter, Multimode Dual LC Fiber, 1.25Gb/s SFP Module to 10/100/1000Base-Tx Fiber Media Converter with a SFP 1000Base-SX Module850nm, 550m
Feature
Smart Management1x Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet; 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover.High-quality and Widely CompatibilityEquiped with QUAL COMM QCA8334 chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte.
Easy Installation and UseModulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status.
Compact DesignOnly 9.3 cmx 7.1cm x 2.7cm (3.7"x 2.8"x 1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space.
What You Get1x SFP Gigabit Ethernet Media Converter, 1x 1000Base-SX module, 1x DC Power Adapter, 1x Product Manual. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support.
Description
10Gtek's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums.Main Features:
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x
Auto negotiation function allows UTP port to auto select 10M, 100M or 1000M
Ethernet port supports MDI/MDI-X auto crossover
Extends distances up to 550M (multi mode fiber)
Auto MDI/MDI-X support on RJ-45 port
Support Full Duplex and Half Duplex
Status LED's for TX,FX LINK/ACT, POWER,FDX to easily monitor network status
1Mbit RAM for data buffer
Supports jumbo frame size 9K bytes
Optical Port:
850nm Multi mode
Connectors: LC connector
Ethernet Port:
Connectors: RJ-45 Connector
LED Indicators:
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 1000Mbps, else light off
TX: Light on when TP speed is 1000Mbps, else light off
Link/ACT: Left side is indicate for fiber port link/act and right side for TP, light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active, light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off
Specifications:
Output voltage: 5VDC 1.0A
Power dissipation: 3 watts
Housing: Metal enclosure
Dimensions: 93 x 71 x 27mm
Weight: 0.5kg
Operating Temperature: 0C to 60C
Storage Temperature: -20C to 70C
Warranty:2 years
9. Multimode LC 850 nm Gigabit Fiber Media Converter - Includes SFP 550 m (0.34 Miles) LC to UTP Cat5e Cat6 10/100/1000 RJ-45 Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support
Feature
AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed And Extends in over Multi Mode Fiber to up to 500 m - 0.34 miles - (Transmission Wavelength -- 850 nm)NO MORE Integration Hassles, simply plug in an Ethernet cable to any Ethernet port, whatever speed it is! UPC (Blue) Type Fiber Patch-cords Supported;
SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance
PLUG & PLAY - Simply plug in an optical port and UTP port, and it will work immediatelly
FREE UTP Cat5e Patch Cable (1m - 39in) Comes In The Set With Every Unit! - Colors May Vary Depending on Stock;
Description
Extend your Gigabit or Fast Ethernet Network Over Multi Mode Fiber Up to 550 m - 0.34 miles - (using 850 nm Wavelength SFP module that comes free already installed in SFP slot) With Ease
AN-UM-SMC-AS-J+MM-SFP-KIT Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port - You just need plug in the cables and it will work right away!
Powering it up? Easy, it will come with AC power adapter in set, just plug it!
All These Important Features Are All Supported:
Media converter will extend Your LAN network with any standard Ethernet interface to distances with 550 nm (0.34 miles) or less - you no need to use attenuator also for significantly less distances than 550 nm (0.34 miles) as well.
Setup of these units are really easy as the 3 steps shown in picture gallery, and all default settings will work for all of your cases, but for sophisticated users we had created some more customized settings available via dip switches on unit's back panel.
It's always good to have versatile and adaptive unit to all Your cases!
10. Single Mode LC WDM Single Fiber Bi-Di Gigabit Media Converter - Built-in Fiber Module 20km (12.42 Miles) - to UTP Cat5e Cat6 10/100/1000 RJ-45 - Auto Sensing Gigabit or Fast Ethernet Speed -1 Pair
Feature
AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed And Extends Ethernet over Single Mode Single Fiber to up to 20 km (12.42 Miles)NO MORE Integration Hassles, simply plug in Ethernet cable to any Ethernet port, whatever speed it is! UPC (Blue) Type Fiber Patch-cords Supported. Only 1 fiber needed - WDM (1310nm/1550nm) wavelengths used
SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance - Configured on demand using Dip-Switches
PLUG & PLAY - Simply plug in fiber optical port and UTP RJ-45 port, and it will work immediately
WHAT YOU GET: 1 pair (2 units) media converters and FREE UTP Cat5e Patch Cable (1m - 39in) Comes In The Set With Every Unit! - Colors May Vary Depending on Stock. + Wall Mount Ears comes in set with every unit as well!
Description
Extend your Gigabit or Fast Ethernet Network Over Single Mode Single Fiber Up to 20 km (12.42 miles) using 1310 nm/1550nm & 1550/1310nm With Ease - and save on your fiber infrastructure, because only 1 fiber will be needed for 2 units to establish a fiber link.
AN-UM-SMC-AS-J + AN-UM-SFP-SM/WDM/1310-20/D Singlemode Single Fiber Media Converter Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port - You just need plug in the cables and it will work right away!
Powering it up?
Easy, it will come with an AC power adapter in the set, just plug it in!
Features
Specifications
