Shopping brushless tiny whoop fpv has never been easy. You may come many of website, read brushless tiny whoop fpv reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best brushless tiny whoop fpv
Rank
Product Name
Score
Related posts:
Best brushless tiny whoop fpv reviews
1. BETAFPV Beta65 Pro 2 Frsky 2S Brushless Whoop Drone Quadcopter with 2S F4 AIO FC Frsky Recevier 5A ESC 25mW Z02 Camera 35 Smart Audio 12000KV 0802 Motor PH2.0 Cable for Tiny Whoop FPV Racing
Feature
BETAFPV Beta65 Pro 2 is the smaller version of the Pro series. With the AIO F4 2S flight controller and 0802 12000KV brushless motors, only weighs 24g without batteries. 4g lighter and 10mm smaller than Beta75 Pro 2.Wash-out issue almost not exists in Beta65 Pro 2 drones. 2pcs 300mAh HV 1S high rate batteries are recommend by default.
The 2S F4 FC AIO Brushless FC in the Beta65 Pro 2 comes with a SPI Frsky receiver, binding procedure is easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual
Lighter, faster and higher integrated than the X series drones. With the high performance STM32F411 processor FC boards and tuned Betaflight Ominibus 4.0.0 firmware, pilots fly it like a faster Tiny Whoop racing drone.
Whole drone no soldering or tinkering necessary. Customized lightest 0802 12000KV motors with cable connectors. Just plug and play.
Description
BETAFPV Beta65 Pro 2 2S Brushless Whoop Drone with 2S F4 AIO FC Frsky Recevier 5A ESC 25mW Z02 Camera 35 Degree OSD Smart Audio 12000KV 0802 Motor PH2.0 Cable for Tiny Whoop FPV Racing
X series, like Beta65X or Beta75X, represent the highest performance of 2S whoop drones. With long range rx, powerful ESC and motors, pilots would fly the X drone like a smaller mini drones; Pro series, like Beta65 Pro 2 and Beta75 Pro 2, have a higher integrated AIO FC and lighter weight, pilots fly it like a faster Tiny Whoop drone.This is the biggest difference of the X series and Pro series drones. You could have a noticeable different experience in control.
Specification:
Weight: 24g (without battery)
Motors: 0802 12000KV with connector
Props: 31mm 4-blades props, 1.0mm shaft hole
Camera: tiny AIO Camera
Receiver Option: SPI Frsky
Battery: 300mah 1S HV Batteries 2pcs
FC
CPU: STM32F411
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
AIO Camera VTX
On the Beta65 Pro 2, it is the customized version lighter AIO VTX camera, only 2.9g.
Output power: 25mW
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: PAL
Field of view: 100-120 degrees with 1/4 lens
PACKAGE
1 * Beta65 Pro 2 BNF 2S Whoop Quadcopter
2 * 300mAh 1S HV battery
1 * Spare camera mount with 25 degree tilt
2. EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop 75mm BNF FRSKY Ready to Fly FPV Beginners Durable Inverted Motors Full Acro Level Horizon Mode
Feature
Micro style drone 75mm, Lightweight and great for beginners.FRSKY D8 receiver. (ONLY COMPATIBLE WITH FRSKY.)
Speeds up to 35mph.
Safe and Great for indoor racing
F4 processor and ultra fast Gyro system
Description
**DO NOT ATTEMPT TO CONNECT A 2s BATTERY! THIS QUAD IS 1s BATTERY ONLY!**
Product includes:
1 x Tinhawk Racing Drone
1 x Carrying Case
1 x 450mah 1s 4.35v HV Battery
1 x Bag of spare parts that include
1 battery connector and motor screws
1 x USB Battery charger with x 4 connectors, this allows you to charge 4 batteries simultaneously at 4.35V.
1 x Manual
FRSKY D8
Drone weight: 29grams
Weight with battery: 42grams with 450mAh 1S battery
Frame Material: polypropylene
Propeller: 40mm diameter
Blades: 3
Pitch: 23mm
Weight: 0.5g
Motor: long life bearings and beeper
Stator: 8mm x 2.5mm ( 08025 )
KV: 15000KV
Flight Controller: F4MATEKF411 firmware
ESCs: 4 in 1 3A
Receiver: EMAX Tiny receiver ( Compatible with Frsky D8 mode )
VTX Power: 25mW
Channels: 37CH
Camera: 600TVL CMOS
Battery: 1S 4.35V 450mAh LiHV
Discharge rating: 80C / 160C
Dismantling any conventional thinking, EMAX went back to the drawing board and created something new to reach all of its design goals with no compromise. The Tinyhawk offers incredible performance, thanks to a powerful F4 processor and ultra fast Gyro system, creating the most stable flight experience ever in a miniature racing drone the size of the palm of your hand. By creating an entirely new power system from the ground up, EMAX has achieved the perfect power to weight ratio, utilizing a lightweight micro brushless motor paired together with a state-of-the-art radical propeller design matched to the performance curve of the entire system.
Integrated into the Tinyhawk is a video transmission system with a first-person-view camera, allowing the pilot to utilize a compatible Virtual Reality goggle or screen to experience a pilot's view firsthand.
3. BETAFPV Beta65S Lite Mini Drone 1S Brushed FPV Quadcopter with FC Silverware Firmware Z02 Camera 7X16 19000KV Motor for Tiny Whoop FPV Racing
Feature
Supported radio transmitterBETAFPV TX01 radio transmitter; Jumper T8SG radio transmitter; Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol. If not sure whether your radio transmitter could support this FC board, please email us ( [email protected]) for help.As same as the Beta65S, more punch on throttle wth faster 716 17500KV motors and 3-blade props. BETAFPV Z01 aio 25mW vtx camera with 48 channels in total.
Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviration compatible transmitter module.
Support level mode and acro mode. Also it has the ability to change setting for custom builds, or to adapt to personal preferences by stick gestures.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV 65S Lite Micro Whoop Quadcopter Silverware Firmware with Lite Brushed Flight Controller
The Beta65S Lite is a new version with BETAFPV Lite brushed flight controller. Powered by silverware, much simple and much affordable. It is ready to fly and the Silverware software does not require switch setting like Betaflight does.
Specification:
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: BETAFPV Lite Brushed Flight Controller
https://www.amazon.com/dp/B07BBN1S62
Motor: 7X16mm 17500KV Brushed Motor
http://www.amazon.com/dp/B074MWWQHD
Receiver: Bayang protocol
Camera and 5.8G Tx AIO 520TVL 1/4 Inch Camera 25mW 40CH
Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector
Battery: 3.7V 260mah Lipo battery
Flight time: 3 mins
Supported radio transmitter
BETAFPV TX01 radio transmitter
Jumper T8SG radio transmitter
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc which using the Bayang protocol.
Note: If you have a Frsky Tanaris QX7/X9D radio transmitter and want to try this FC board, just plug in a MTX90 multiprotocol module and done.
Compatible multiprotocol module:
MTX-9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO)
Other 4in1 multiprotocol module that support the Bayang protocol
Package Included
1 * Beta65S Lite Mico FPV Quad
4. BETAFPV Beta65 Pro 2 Whoop Frame Kit with 2 Sets 31mm 4-Blade Props 1.0mm Shaft Blue for 65mm 2S Brushless Whoop Drone Like Beta65X Beta65 Pro 2 Brushless Micro Quadcopter
Feature
Betafpv Beta65X 2S Whoop Frame is designed for 65mm 2S whoop drone, with a customized battery slot to support 2pcs 1S whoop style batteries, like 1S 300mah battery.The light and durable frame is clear plastic material only 3.6g/pcs, with a 26mm x 26mm FC mounting columns can match whoop style flight controller, like 2S F4 Brushless Flight Controller.
There are 2 sets 31mm 4-blade props 1.0mm shaft hole in this kit, can fit the 0x0x motors perfectly, only weighs 1.2g/set.
This frame natively support 0x0x motors, like 0802, 0705 etc. We highly recommend our Betafpv 1S 300mAh battery and 0802 brushelss motors for DIY your Beta65X 2S Brushless BNF.
Any technical support needed please contact: [email protected].
Description
BETAFPV Beta65X 2S Whoop Frame Kit with 2 Sets 31mm 4-Blade Props 1.0mm Shaft Blue for 65mm 2S Brushless Whoop Drone like Beta65X BNF
Specifications:
Frame
Material: Clear plastic
Diagonal motor to motor distance: 65mm
Motor mounting hole: for 0X0X series motors
FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
Battery slot size: for 2pcs 1S whoop style batteries
Weight: 3.6g/pcs
Propellers
Prop: 31mm 4-blade props
Material: Clear plastic
Inner diameter: 1.0mm Shaft
Product material: Clear Plastic
Color: Blue
Weight (2CW+2CCW): 1.20(g) = 0.04(oz)
Recommend Parts:
Batteries: 300mAh 1S Lipo HV batteries - www.amazon.com/dp/B07FFTVB8C
Motors: 0X0X brushless motors, like 0802 17500KV motors - www.amazon.com/dp/B07GYR31T8
FC: Betafpv 2S Brushless FC - www.amazon.com/dp/B07H8XQ7R6
Package:
1 * Beta65X frame for 65mm 2S whoop drone
8 * 31mm 4-blade 1.0 shaft 2S Whoop Propellers (4CW + 4 CCW)
5. BETAFPV Lite 2S Brushless Flight Controller Silverware Firmware SPI Frsky Receiver 5A ESC with XT30 Cable for 2S Brushless FPV Racing Whoop Tiny Whoop
Feature
2S FC with SilverwareBETAFPV Lite 2S brushless flight controller is the first lite 2S FC with Silverware firmware on BETAFPV, CPU has been updated to STM32F042G6U6, can totally supports 2S brushless motorsBuilt-in Current MeterThis Lite 2S FC has a built-in current sensor, you could get a more accurate current value from the OSD information instead of the virtual current meter when flying
Update of LiteOSDBuilt-in LiteOSD, which uses UART, improves the reflash rate of the OSD, OSD data is more stable without lighting, solving drift issue of whoop undering Angle mode. It allows you to select viewing options, such as voltage of battery, flight time, flight mode and setting menu. Includes OSD menu, supports PID tuning, motor rotation changing and channel mapping of AETR/TAER switching via OSD menu
New DesignAdded the download port of FC, which is convenient for downloading the program without soldering other cable. SmartAudio is supported. It is able to solder the Wire-Connected version A01 AIO camera and M01 AIO Camera
Receiver SupportedBuilt-in Frsky D8 native receiver, supports SBUS and DSMX protocol, including Frsky xm / xm+ receiver, Futaba receiver, Crossfire receiver in SUBS mode and DSMX receiver. If there is anything problem with your BETAFPV item, please contact us before returning or refund. We will help you solve it at the first time. [email protected]
Description
BETAFPV Lite 2S Brushless Flight Controller SPI Frsky Receiver 5A ESC with Silverware Firmware OSD Smart Audio with XT30 Cable for 2S Brushless FPV Racing Whoop Tiny WhoopSPECIFICATION OF FC
CPU: STM32F042G6U6
Six-Axis: MPU 6050
Size26mm*26mm
Firmware: Silverware
OSD: LiteOSD
Built-in Receiver: Frsky D8
Support Receiver: SBUS protocol and DSMX protocol
Smart Audio is supported
Weight: 5.69g with XT30 cable
SPECIFICATION OF ESC
Input Voltage: 2S
Continuous Current: 5A
Peak Current: 6A
Factory Firmware: S_H_50_REV16_7.HEX
Signal Support: D-shot15, D-shot300, Oneshot125, Multishot, PWM
Motor Connectors: 1.25mm header pins connector
Support BLHeliSuite programmable
RECOMMEND PARTS: Battery:
300mAh 2S lipo - www.amazon.com/dp/B07R7856RX
350mAh 2S lipo - www.amazon.com/dp/B07JG3ZFC5
Camera:
A01 AIO Camera - www.amazon.com/dp/B07X6MDBXM
M01 AIO Camera -- www.amazon.com/dp/B07X96YBJT
Motor:
0802 17500KV -- www.amazon.com/dp/B07GYR31T8
0802 12000KV -- www.amazon.com/dp/B07MN8P96M
PACKAGE:
1 * BETAFPV 2S Lite brushless flight controller
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Eachine black E010 frame / 75mm / 85mm frames)
4 * Anti-vibration rubber dampers
6. EMAX Tinyhawk S 1-2s Brushless Micro Indoor Racing Drone Whoop 75mm BNF FRSKY Ready to Fly FPV Beginners Durable Inverted Motors Full Acro Level Horizon Mode
Feature
Tinyhawk 1-2s capable.55+MPH top speed
Includes 1 x 1s and 1 x 2s battery
Bigger motors than Tinyhawk Original plus it includes 4 blade propellers for Turtle Mode
Includes 1s and 2s battery charger
Description
***PLEASE READ BEFORE FLYING!***
*It takes 1s and 2s.
**To fly on 1s you will need to change PID and RATE profile from OSD to PID PROF 1 and RATE PROF 1.**
**To fly on 2s, you will need to change PID and RATE profile from OSD to PID Prof 2 and RATE PROF 2**
**To charge 2s batteries with USB connector, you will need to connect the BALANCE LEAD only.**
**To charge 1s batteries you will need to connect the PH2 PIN connector.**
***To access OSD, Left Joystick to left, and right joystick UP at the same time.***
*What's included:
1 x Tinyhawk
1 x set of quad blade propellers
1 x USB charger for 1s and 2s batteries.
1 x 300mah 2 battery
1 x 450mah 1s Battery
1 x Manual
1 x Bag spare parts
The Tinyhawk encapsulated the technological advancements made within the micro drone field, designed to fully realize the potential performance of a drone the size of the palm of your hand. But the engineers at EMAX didn't stop there. With further advancements pushing the boundaries within this miniature scale, the Tinyhawk S was born.
* Determined to increase the efficiency of the entire power system, the Tinyhawk S features a newly engineered brushless motor that is both smaller in scale in order to reduce weight, but also be able to spin at higher RPMs, increasing the power output of the entire aircraft.
* Utilizing this new power system, up to 20% more flight time than the previous generation can be achieved, as well as the ability to accept a higher voltage in order for the pilot to customize the performance of the Tinyhawk S. Featuring a dual slot mount, the camera will be able to adjust its angle to the pilot's preference to help navigate the craft at higher speeds. With newly reinforced struts, the frame's durability is unmatched in its class.
* The Tinyhawk S is the micro indoor racing drone.
7. BETAFPV F4 FC 1S Brushed Flight Controller with SPI Frsky Receiver OSD Smart Audio for FPV Tiny Whoop Micro Racing Drone
Feature
The world's first compatible BetaFlight OSD, FrSky Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter.Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings.
Built in SPI Frsky D8 protocol native receiver, compatible with almost ALL Frsky radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module.
Designed to work with current Tiny Whoop or Blade Inductrix setups.
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
Description
BETAFPV F4 Brushed Flight Controller Integrated with OSD and Frsky Receiver for Tiny Whoop Drone.
BETAFPV F4 brushed FC board bring a new era in FPV whoop technology. STM32F411 100MHz high performance MCU, 30A lower resistance MOSFETs, SPI Frsky Rx, Build-in Betaflight OSD and polar reversed protection. All of these is backed by the same reliability and warranty of all BETAFPV FC boards.
Specifications:
CPU: STM32F411CEU6
Six-Axis: MPU6000
ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight MATEKF411RX 3.4.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI Frsky D8 protocol (AKA FRSKY_D on Betaflight Configuration)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 3.7g
Tips:
How would do an OSD with the AIO cameras?
There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. There is some examples:
BETAFPV H02 or other AIO cameras with video in and out available.
FX806 or other AIO cameras with camera and vtx are connected with cables.
Other regular AIO cameras like VM275, FX805, Eachine XT02 etc.
BETAFPV Support Freshdesk for BetaFlight OSD Setup:
https://betafpv.freshdesk.com/support/solutions/articles/27000038661-betaflight-osd-setup
Package:
1 * F4 OSD brushed flight controller ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
8. BETAFPV Beta85 Pro 2 TBS Crossfire Brushless Whoop Drone with 2S F4 AIO FC 5A ESC Z02 AIO Camera 35 Degree 0/25/200mW OSD Smart Audio 1103 11000KV Motor XT30 Cable for Tiny Whoop FPV Racing
Feature
F4 2S AIO FC Equipped with F4 2S AIO brushless FC. It is integrated a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC, can totally support 2S power with XT30 cable plug1103 11000KV MotorCustomized lightest 1103 11000KV motors with cable connectors. Just plug and play. Without soldering or tinkering necessary
Z02 AIO Camera VTXBeta85 Pro 2 comes with Z02 AIO camera, which supports NTSC system with 35 degree angle, unadjustable. Has a wide lens angle of 100 to 120 degree. Switchable output power including 0/25/200mW. Smart audio is available for VTX remote control in default
Durable Frame&PropsWith durable and light enough frame for 85mm whoop. Washout issue almost doesn't exist with Emax Avan 2 inches 4-blade 1.5mm shaft hole propellers
Lighter, powerful for fpv racingBeta85 Pro 2 only weighs 42.5g without battery, perfectly suitable for FPV racing. Provides pilots 2min30s flight time with 300mAh 2S high rate lipo battery
Description
SpecificationWeight: 42.5g (without battery)
FC: F4 2S AIO FC (with XT30 cable )
Motors: 1103 11000KV Brushless Motor
Camera: Z02 AIO Camera VTX
Props: EMAX AVAN 2 inches 4-Blade 1.5mm Shaft Props
Battery: 300mAh 2S 45C Lipo
Receiver: Frsky FCC
Flight time: 2 min 30 sec with 300mAh 2S 45C lipo battery (smooth flight in a windless environment)
FC&ESC Specification
CPU: STM32F411
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Z02 AIO Camera VTX
Output power: 0mW, 25mW and 200mW (switchable)
TV System: NTSC
Field of view: 100-120 degrees
Tilt angle is 35 degree (unadjustable)
Frequency: 5.8GHz 48 channels with Raceband
Smart Audio function is included for radio control
Recommend Parts:
FC: F4 2S AIO FC No RX -- www.amazon.com/dp/B07MT3VM3Z
Motor: 1103 11000KV motor -- www.amazon.com/dp/B07FN64599
Camera: Z02 AIO Camera -- www.amazon.com/dp/B07JG9Q77L
Frame: Beta85X Frame -- www.amazon.com/dp/B07MZ3BCXP
Props: EMAX AVAN 2 inch 4-Blade Props -- www.amazon.com/dp/B07RXMJJSM
Battery: 300mAh 2S 45C Lipo -- www.amazon.com/dp/B07R7856RX
350mAh 2S Lipo -- www.amazon.com/dp/B07JG3ZFC5
Package
1 * Beta85 Pro 2 Whoop Drone
1 * 300mAh 2S 45C Lipo
1 * Spare camera mount with 25 degree tilt
4 * Spare Emax Avan 2 inches 4-Blade Props (2CW+2CCW)
9. Brushless Tiny Whoop Frame Tinyhawk FPV Racing Drone 98mm with Ducted Propeller Guard for cinewhoop Micro Drone Quadcopter
Feature
2 inch whoop frame Small size and ultra-light body that can be faster in fligh,designed and born for micro FPV racingWhoop drone made of 3K Carbon Fiber to have a rigid bottom plate that make equipment arrangements more reasonable and sturdy
With Propeller Protection Guard to make micro drone more safe
Wheelbase:98MM.Bottom Plate Thickness:2MM.Upper Plate Thickness: 1.5mm.Weight:29g
Description
2inch Micro FPV Race Whoop Frame 98mm with Ducted Propeller Guard for Micro Drone QuadcopterSpecification:
Wheelbase:98MM.
Bottom Plate Thickness:2MM.
Upper Plate Thickness: 1.5mm.v Height of aluminum column:22mm.
Weight:29g.
Material: 3K Carbon Fiber.
------------------------------------------
Recommend Parts:
Flight Controller: F4/F3/Tower System(Hole distance:20*2016*16)...
Motor: 11XX...Brushless Motor.v ESC: 10-100A Brushless ESC.
Propeller: 2inch.
Battery: 2-6S 200-500mAh Lipo Battery.
Camera: suitable for wide 19MM and 14MM cameras.
------------------------------------------
Package list:
1 set 98mm carbon fiber frame
This product is an empty machine version, without any electronic equipment.
10. BETAFPV 8pcs BT2.0 300mAh 1S Battery 4.35V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone
Feature
9A Continuous currentBETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current. With this 300mAh 1S BT2.0 battery, all 1S brushless drone will gain powerful and perform perfectlyDischarge RateThe discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag
1.0mm Banana Connector1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our newest BT2.0 connector to get the best performance from this BT2.0 300mAh 1s battery
Flight TimeDischarge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power. You can get 2mins flight time in full throttle on Meteor65
Extra Adapter CablePilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cable(NOT INCLUDED), no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester & charger for your need
Description
BETAFPV 8pcs 300mAh 1S Battery BT2.0 4.35V 30C/60C FPV Lipo with BT2.0 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Metreor65 Micro Whoop DroneSince February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. Betafpv always keeps moving forward with passion for breakthrough experiences.
Now Betafpv exclusive designed BT2.0 connector 1S battery has finally come out, which has broken through the bottle-neck of PH2.0 crappy crimped pins.
Specification
Capacity300mAh
Rate: 30C/60C
Continuous current: 9A
Burst current(3sec): 15A
Voltage4.35V
Size67.3mm*11.8mm*6.1mm
ConnectorBT2.0 Connector
Weight7.59g/pc
Flight time: 2mins in full throttle on Meteor65
2mins 30secs in smooth flight on Meteor65
Caution:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
Recomment Part:
BT2.0 Connectors Male and Female -- www.amazon.com/dp/B081CFXCH8
BT2.0 1S Whoop Cable Pigtail -- www.amazon.com/dp/B081C5RLJ9
BT2.0 Battery Charger and Voltage Tester -- www.amazon.com/dp/B081C9X3T5
BT2.0-PH2.0 Adapter cable -- www.amazon.com/dp/B081CGRH4B
Package
8 * BT2.0 300mAh 1S Lipo Battery
