Top 10 best adjustable hole saw for wood: Which is the best one in 2020?

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 adjustable hole saw for wood. Its followed by an in-depth review of each adjustable hole saw for wood. Hopefully, once you are done reading this article, you will be well informed about adjustable hole saw for wood and be able to select the right adjustable hole saw for wood for you without any hesitations.

Best adjustable hole saw for wood

Related posts:

Best adjustable hole saw for wood reviews

1. General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch

Feature

Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter
The tempered steel body features marked graduations on the beam for fast measurement and application
#55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM
This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round
All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill

Description

Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter. The tempered steel body features marked graduations on the beam for fast measurement and application. #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM. This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round. All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, were proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

2. QWORK 1-5/8" to 8" (40-200mm) Adjustable Hole Cutter Hole Saw for Recessed Lights Ceiling Speakers Vent holes on Sheetrock Drywall Plaster Ceiling Tile Soft Acoustic Tile Plastics Wood and Plywood

Feature

1) Adjustable twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes in ceilings, walls and floors, Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
2) This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one carpenter pencil, one 2m tape measure and a durable storage case
3) Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application
4) Two blades counter balance the cutter for low vibration. 2 sets of user replaceable blades: High Speed Steel blades for wood, plastics, acoustic tile, laminates, rubber; Tungsten Carbide blades for Sheetrock, drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
5) One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decoraters, trademen, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application

Description

Adjustable hole cutter kit

Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)

Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides

Shank: 3-flat shank

Infinite adjustment and measure bar is marked in inches and metric system

Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting

Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood

User Instruction

It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides

Caution

* When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut

* Always keep the cutting blades sharp

* Do not use undue force, or too great a drill speed, suggested cutting speeds

Hole Diameter(mm) Drill Speed(RPM)

40 - 49 --------------- 800

50 - 69 --------------- 600

70 - 89 --------------- 400

90 - 119 -------------- 200

120 -180 -------------- 100

* Ensure the cutting blade holders are tight before use

* Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker

* Screw the wing nut on to the threaded end of the spindle so that that assembly is secure

* As with any new tool, always test on a scrap piece of material to get familiar with the tool

3. DGCUS 7/8"-5" Adjustable Circle Hole Cutter Wood Drywall Drill Bit Saw Round Cutting

Feature

Dual blade design for faster, cleaner cuts.
Heavy-duty woodworking construction with the longest service life.
Cutting depth up to 5/8". Capacity: 7/8" to 5" diameter.1/4" Shank fits most drills
Can be used cut many kinds of materials, such as plywood, hardwood, laminates, composite, rubber, plastic and so on.
Notice: Can not use on steel sheet or other metal, and the material of drilling does not contain iron, nails or other metal.

Description

Description
Adjustable Circle Hole Cutter
Adjustable cutter cuts perfect circles in wood, plastic and light metals
Durable black oxide finish
Cutting depth up to 5/8"
Capacity: 7/8" to 5" diameter
1/4" Shank fits most drills

Package included:
1x Cutting Blades
1x Drill Bit
1x Hex Wrench

Notice:
1. When drilling the hole, the two sides need to be equal in distance, if not equal, the force will be uneven.
2. Adjust the required size, be sure to use the hex wrench to tighten the screws.
3. Please don't use on steel sheet or other metal.
4. The speed of drilling must be slow, and the material of drilling does not contain iron, nails or other metal.
5. Can not be drilling the hole backwards in the ceiling, can only go vertical drilling from the top down.

4. Amartisan Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for recessed lights, ceiling speakers, vent holes (New Hole Cutter)

Feature

[SCOPE OF APPLICATION]Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
[SIZE ADJUSTABLE]Double blade hole cutter applied 1-5/8" to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides.
[DUSTPROOF DESIGN]ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home.
[HOLE CUTTER KIT]It is a very practical tool set with dozens of hole saws that make it faster, safer and easier to cut the required hole size.
[STURDY CARRY CASE]Easy to carry, it is a tool that carpenters, professionals and DIY home owners need to punch holes for recessed lights, ceiling speakers and vents.

Description

Specification:

Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)

Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides

Great for DIYer cutting holes in soft sheetrock for recessed light cans and speakers.

Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal

Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and PlywoodUser

User Instruction:

Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick.

Ensure the cutting blade holders are tight before use

Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing.

5. Yaetek 7/8"-5" Adjustable Circle Hole Cutter Wood Drywall Drill Bit Saw Round Cutting 30mm - 120mm

Feature

Adjustable cutter cuts perfect circles in wood, plastic and light metals
Durable black oxide finish
Cutting depth up to 5/8"
Capacity: 7/8" to 5" diameter
1/4" Shank fits most drills

Description

Adjustable Circle Hole Cutter

Adjustable cutter cuts perfect circles in wood, plastic and light metals
Durable black oxide finish
Cutting depth up to 5/8"
Capacity: 7/8" to 5" diameter
1/4" Shank fits most drills

6. Task Tools T22097 Adjustable Hole Saw Set, 1-1/8-Inch to 2-1/2-Inch

Feature

7-blade hole-saw set with bit and mandrel
Cuts laminated wood, softwood and plastic
Includes blade diameters from 1-1/8-Inch to 2-1/2-Inch

Description

Pay for only one bit and mandrel setup and swap out blades with this adjustable hole saw set from Task Tools. The set includes blade size options great for cutting hardwoods, softwoods and plastics with no splintering. This set includes blades from 1-1/8-Inch to 2-1/2-Inch in diameter.

7. MIBRO 460271 Adjustable Circle Hole Cutter

Feature

Quick and easy adjustment
Strong High speed steel for a long life

Description

d3

8. HolePro T-200 1-5/8" to 8" Adjustable Hole Cutter for Recessed Lights Speakers. Twin High Speed Steel HSS Blades use Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER

Feature

HSS Blades NOT REPLACEABLE but can be resharpened -NOT FOR USE in Drill Press
Twin blades for perfect balance - no bars to change or threads to break off
Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
11" OD Shield - Cuts perfect holes from 1-5/8" to 8" - replacing hole saw kits with multiple saws
Max cut depth: 1": cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics

Description

** DRILL NOT INCLUDED *** ***NOT FOR PLASTER *** NOT FOR ENGINEERED WOODS SUCH AS PLYWOOD OR OSB OR MDF*** HSS BLADES NOT REPLACEABLE *** Great for DIYer cutting holes in soft sheetrock for recessed light cans and speakers. Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal. High speed steel blades cut through sheetrock and have a thin kerf profile to cut through wood, plastics, and delicate acoustic tile. Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick. Infinite adjustment and measure bar is marked in inches. Put one blade holder at "6" and the same with the opposite blade holder and the tool cuts a 6" diameter hole. Shield catches all the shavings and dust and holds the cut section. Does away with the mess and need for drop cloths. ABS shield is strong enough to stand on and with its silicone rubber gasket is safe to use on any surface. Shield remains in place and the internal bearing allows the adjustable hole cutter to spin independent of the shield. Orange knob makes it simple to limit the cutting depth to reduce risk of cutting wires and pipes behind the sheetrock or paneling. Unlike single blade adjustable hole cutters there are no balance bars to change and nothing to break off and make the tool useless. No wobble as with single blade hole cutters so holes are perfectly round even when cut into soft sheetrock. *** NOT FOR USE IN DRILL PRESS*** Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker. As with any new tool, always test on a scrap piece of material to get familiar with the tool**** NOT FOR USE with PLASTER, or PLASTER type materials, including button board sheet rock, gypsum, etc.

9. Hole Saw Kit, Meterk 17 Pcs Hole Saw Set with 13Pcs Saw Blades, 2 Mandrels, 1 Installation Plate, 1 Hex Key, Max Size 6"(152mm) and Min Size 3/4" (19mm), Ideal for Soft Wood, PVC Board and More

Feature

17 PCS ACCESSORIES - Meterk hole saw kit includes 2pcs mandrels, 1pc installation plate, 1pc hex key and 13pcs saw blades, the maximum size is 6" (152mm), the minimum is 3/4" (19mm), with 25mm cutting depth, meet various demand.
HIGH QUALITY - Made of heat treated and blackening treated carbon steel, Meterk hole saw boasts advantages of high-performance, rust protection and durable and long working life.
HIGH PRECISION - Upgraded design with ultra sharp serrations for faster and cleaner cutting, which is ideal for softwood, plastic plate, plasterboard and thin PVC board. Warms tips, not suit for hard metal, hard wood, density board.
PORTABLE STORAGE CASE - Meterk hole saw kit comes with a tough box for easy storage and organize. Easy and convenient to carry. Improve work efficiency.
PACKAGE CONTENTS - Includes 13 x Meterk Hole Saw Blades, 2 x Mandrels, 1 x Hex Key, 1 x Installation Plate, 1 x Storage Box. Quality best, service first, any problems please feel free to contact us, we are always at your service.

Description

Meterk 17 Pieces Full Set in Case with Mandrels,
Full Set in Case with Mandrels, Hex Key and Install Plate for Soft Wood,
PVC Board and Plastic Plate Drilling, Hardened High Carbon Steel
Cutting Depth 25mm, 13 Sizes of the blades: 3/4" (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm),
1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 6"(152mm)

10. LDEXIN Adjustable Circle Hole Cutter Wood Drywall Drill Bit Saw Round Cutting Hole diameter 30mm to 120mm

Feature

Adjustable Hole Cutter has alloy tool steel cutting blades and drill bit
Having adjustable two sharp blades on both side of the measure-bars
To adjust the size, locate the inner edges of the blade holders against the size graduation.
Circle Hole Cutter easily cuts holes from 1" (30mm) to 5" (120mm)
Use the chisel end drill to bore thin wood. Use the twist drill for thick wood.

Description

1pcs adjustable circle cutter for drill (Set of Cutter + Blades + Centre Drills)
Material: Alloy
Hole diameter: 30mm to 120mm(1.2 to 4.72inch)
Working depth: 25MM
Packing Weight: 370g
Packing Size:20.5x15.5x2cm

Conclusion

By our suggestions above, we hope that you can found the best adjustable hole saw for wood for you. Please don't forget to share your experience by comment in this post. Thank you!