Shopping 12v switch atv has never been easy. You may come many of website, read 12v switch atv reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best 12v switch atv
Rank
Product Name
Score
Related posts:
Best 12v switch atv reviews
1. 12V Solenoid Relay Contactor & Winch Rocker Thumb Switch Combo for ATV UTV
Feature
12V Solenoid Relay Contactor & Winch Rocker Thumb Switch COMBO for ATV UTVThe installation procedure included states clearly how to install. It is easy and just follow the instruction.
Please note your winch model diagram/picture in the following section for further instrution. Also, Please disconnect vehcile ground and positive leads from the battery before you begin.
Do not attempt to install wiring when the battery is connected!
Description
Specification:Color: As Pic Shows
Package include:
1X Solenoid Switch COMBO
1X Installation Procedure
6X Protector As Pictured
2. Battery Switch, 6V 12V 24V 48V 60V Battery Disconnect Master Cutoff Switch for Marine Boat RV ATV UTV Vehicles, Waterproof Heavy Duty Battery Isolator Switch, 275/1250 Amps, On Off Position
Feature
Voltage: 6V-60V DC, Operation: On/Off 2 position; Rating: 275A DC Continuous (1hr) , 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm)The patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches
This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements
Tin-plated copper studs and nuts; Ignition-protected
This contour battery master switch is widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0-60V Devices; 1 Year Warranty--a replacement or refund is guaranteed
Description
Specification: Operation: On/Off Rating: 275A DC Continuous (1hr) , 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec), Voltage: 6V-60V DC Stud Size: 2x3/8" (10mm) Widely Applcations: Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0-60V Devices. Easy to Install: Well Built Heavy Duty Cut Off Switch: ABS plastic housing, the rear cover insulating the rear terminals against any short circuits. Super Safety: Battery disconnect switch can disconnect the battery safely to eliminate any power draw from the battery when vehicle or boat is not in use Package Includes: 1 * Battery Switch 4 * Side Pads 4 * Mounting Bolts 1 * Rear Cover3. Hanperal 12V Motorcycle ATV Waterproof Handlebar Headlight Switch Fog Spot light LED On Off Switch
Feature
.The handlebar apply for grips diameter: 22-23mm (7/8" inch).Suitable for 12V battery installation motorcycles,motorbike,scooter.
.Connection:Black(positive).Brown(negative).Blue(connect to the equipment,positive)
.Output circuit protection, overload, reverse polarity and multiple protection, safety to use.
.The item has the pilot lamp,when the switch turn on,the pilot lamp will be lighting,or the lamp will off.
Description
Feature:Color:black
Diameter:22mm
Cable lenght:Approx.50cm
Current:16A
Volatge:12V
Electrical: On-Off
Case Material :aluminum-alloy.
Case Material :aluminum-alloy+ anode sand blasting process.
Mounting Holder apply for Grips Diameter:22-23mm/0.78"-0.90"
Connection:Black(positive);Brown(negative);Blue(connect to the equipment,positive)
4. MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue
Feature
MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lightsPERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
WHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
Description
Fashion Cool Illuminated Rocker SwitchMICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!
It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.
Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).
Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.
Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram
5. MicTuning MIC-LSB1 Laser LED Light Bar Rocker Switch ON-Off LED Light 20A 12V, 5pin, Blue
Feature
MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lightsPERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
WHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
Description
Fashion Cool Illuminated Rocker SwitchMICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!
It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.
Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).
Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.
CAUTION:We recommend professional installation, pls let professional installer to install the switch by following the wiring diagram included; If let the wire short circuit, it would caught a wire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit and test it after all wire hooked well.
Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram
6. 12v 16A Waterproof Motorcycle ATV 7/8inch Handlebar Double Control Button Switch Headlight Hazard Brake Fog Light ON Off Switches (Red)
Feature
The handlebar apply for grips diameter: 22-23mm (7/8" inch)Suitable for 12V battery installation motorcycles,motorbike,scooter.
Switch material:CNC aluminium alloy,Max current for each:16A,Rated voltage:12v,wire length:50cm,3 wires of copper material.Connection:Blue(positive).Brown(negative).Black(connect to the equipment,positive)
Output circuit protection, overload, reverse polarity and multiple protection, safety to use.
The item has the pilot lamp,when the switch turn on,the pilot lamp will be lighting,or the lamp will off.
Description
Feature:Color:black
Diameter:22mm
Cable lenght:Approx.50cm
Current:16A
Volatge:12V
Electrical: On-Off
Case Material :aluminum-alloy.
Case Material :aluminum-alloy+ anode sand blasting process.
Mounting Holder apply for Grips Diameter:22-23mm/0.78"-0.90"
Connection:Blue(positive).Brown(negative).Black(connect to the equipment,positive)
7. Big-Autoparts 12V 20A Waterproof Car Boat Track Switch Push Button Horn Engine Start Starter
Feature
Brand new and high quanlityA push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch
Material: Diecast Aluminum & Plastic
Color: Black and sliver, 12v
This starter switch is sold under brand "Precision Auto Lab", Big-Autoparts is the real one as the picture and description shows, not the fake one from other seller!
Description
Feature:
Brand new and high quanlity.
Push-to-make = SPST Momentary
A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch.
Material: Diecast Aluminum & Plastic
Length: 6.2cm
Width: 2.8cm
Color: Black
Voltage: 12V
NOTE:
It is manual measurement, there may be 2-5mm error. And item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same, hope understand.
Packaging included:
1xStar Button
8. DONJON Wireless Remote Switch with 328ft Long Range DC 12V/24v/48v/72V Switch for Anti-Theft Alarms, Security Systems Roller Lind Door,Gate Barriers, Motor Cycles etc (Two Remote Controls)
Feature
High Power Load:The receiver adopts 30A relay, which can load high-power electrical appliances to ensure long-term stability control.STRONG SIGNAL--Adopts RF technology ,it can pass through walls, floors and doors, control receiver from any place within a reliable distance.Max range is up to 328ft with no obstacle.
Easy To Control:It can Learn multiple remote controllers.Each button of each remote controller can learn.A remote controller can control multiple switches,or multiple remote controllers can control a switch.Easy to operate, flexible and arbitrary combination.
Stable and reliable performance, high receive sensitivity.Configuration of 2 remote controls, more flexible use
Wide Application:It is mainly used in 12V-72V (industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.).
Description
Problems you may have encountered:1.Q: Does the live wire and the neutral wire need to be connected to the remote control switch?
A: Yes
2.Q: My remote control will not work after a period of time?
A: Press the remote control once, the red light on the remote control is not on. Please replace the remote control battery (cr2016 3V).
3.Q: When you press the remote control, the switch makes a TI TA sound.
A: This is the sound of normal work.
4.Q: I don't know how to choose style .
A: First , look at how many volts your device is. For example, home appliance is 110V, you can buy 110-240 items, such as car equipment is 12V, you can buy 12V-72V items.
5.Q: I need multiple controllers to control a switch.
A: Please contact us.
You can contact us by email if you have any problem (if there is a problem with the quality, you can apply for a refund directly ). Of course, I will be patient with your other questions. What worries me most is that you don't want to communicate with me.
What are the features of the DIY remote control switch?
1.3000W high power, enough to meet the use of an electric water heater and high power pumping unit.
2.100 meters of remote control distance, easy to work in garden square farms and even factories.
3.It only needs to be connected to the circuit, without complicated settings. Ordinary people can complete it.
4.Compact design, you don't need to take up a lot of space.
Technical indicators:
voltage:12V-72V
maxload:30A
working distance:100m
Package Includes:
2 x remote controls
1 x Switch
1 x Manual
Handy hint:
1.Connect the switch to the circuit,No matching remote control
2.Welcome to my shop, please enjoy your shopping . Any problem, contact me please.
9. Qiilu 2pcs Red LED Light 12V 20A 3Pin Car Auto Boat Round On-Off Rocker Toggle Switch,SPST Circuit,Waterproof,3/4' 20mm hole
Feature
This is a LED illuminated rocker switch, it can works in most cars and others with a 12V DC sourceSPST 2 pole design (On/Off) 3rd poles with LED to be connected to earth
Our switch comes with a keyhole slot to prevent unwanted rotation
The LED light will be lighted up when the switch is turned on
It is easy to install, just direct setup, no additional work required
Description
Features:This is a LED illuminated rocker switch, it can works in most cars and others with a 12V DC source. SPST 2 pole design (On/Off) 3rd poles with LED to be connected to earth. Our switch comes with a keyhole slot to prevent unwanted rotation. The LED light will be lighted up when the switch is turned on. It is easy to install, just direct setup, no additional work required. Professional manufacturing and high quality material, durable and waterproof.
Specifications:
Material: Plastic + Metal
Color: Black + Red
Voltage: 12V
Current: 20A
Pin Quantity: 3 Pin
Size: 25 x 27 x 20mm/1" x 1.06" x 0.78"
Package Weight: approx. 30g
Package Included:
2 x Rocker Switches
Note:
Easy to install, but professional installation is high recommended!
10. WATERWICH 12V 250A Winch Relay Winch Solenoid Contactor Winch Rocker Thumb Switch Combo with 6 Protecting caps Universal for ATV UTV 2000-5000lbs Winch
Feature
Superior qualityMade of solid and weather resistant steel and powder coated black surface for great durability.This winch solenoid contactor replacement come with shatterproof sealed and corrosion resistant case.Easy to installPre-cutting mounting bracket for easy installation into control box,The installation procedure included states clearly how to install. It is easy and just follow the instruction.The two wires (Green and Black) go to the switch that controls In and Out on a winch. brown and red go to battery,blue and yellow go to winch.
SpecificationRocker Thumb Switch Control Black Wire Length: Approximately 7.2ft, The Stud is 1/4" ;/ Universal For ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb Application.
NoteIt is designed to handle intermittent current loads of 250 amps for up to 10 seconds, requiring a 20-30 second cooling time between cycles.
Applications12V 250A Winch Solenoid Relay Contactor for all 12Vsolenoid winches,including ATV's,UTV's,SUV's,Jeep's,4x4 vehicles, and 12V Trailer ect.
