Top 10 arduino nano bulk

Finding your suitable arduino nano bulk is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best arduino nano bulk including detail information and customer reviews. Let’s find out which is your favorite one.

Best arduino nano bulk

Related posts:

Best arduino nano bulk reviews

1. Longruner Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module for Arduino (KY64-10)

Feature

CH340G Replace FT232RL
Micro-controller ATmega328P
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
Support for external 5V ~ 12V DC power supply; Support power supply by 9V battery.
Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), No welding needed.

Description

Longruner Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module for Arduino

Operating Voltage(logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX,RX,D2 ~ D13
6 PWM ports: D3, D5, D6, D9, D10, D11

1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is boot loader installed in it
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery

Package content:
10 x Nano V3.0 with ATMEGA328P Module
20 x 15 pin headers
10 x 6 pin headers

2. KOOKYE 10 PCS Mini USB Arduino Nano V3.0 ATmega328P Module CH340G 5V 16M Micro-controller board

Feature

1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCUCH340G Replace FT232RL
Support USB download and Power
Support for external 5V ~ 12V DC power supply, Support power supply by 9V battery
Support ISP download

Description

Features:
CH340G Replace FT232RL
Operating Voltage(logic level):5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software

Package including:
10 PCS Arduino Nano V3.0 with ATMEGA328P Module

3. LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)

Feature

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on Arduino IDE.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila.

Description

Specification:
CH340G Replace FT232RL.
Operating Voltage(logic level): 5V.
8 analog inputs ports:A0 ~ A7.
14 Digital input / output ports:TX,RX,D2 ~ D13.
6 PWM ports:D3, D5, D6, D9, D10, D11.
1 pairs of TTL level serial transceiver ports RX / TX.
Support USB download and Power.
Support for external 5V ~ 12V DC power supply.
Support power supply by 9V battery.
Support ISP download.

Package including:
3 x LAFVIN Nano V3.0 with ATMEGA328P Module
3 x USB Cable

4. ARDUINO Nano [A000005]

Feature

The Arduino Nano is one of the smallest Arduino boards available on the market
Tiny form factor, complete, and breadboard-friendly board based on the ATmega328
It works with a Mini-B USB cable
Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users

Description

DESCRIPTION Microcontroller ATmega328 Architecture AVR Operating Voltage 5 V Flash Memory 32 KB of which 2 KB used by bootloader SRAM 2 KB Clock Speed 16 MHz Analog IN Pins 8 EEPROM 1 KB DC Current per I/O Pins 40 mA (I/O Pins) Input Voltage 7-12 V Digital I/O Pins 22 (6 of which are PWM) PWM Output 6 Power Consumption 19 mA PCB Size 18 x 45 mm Weight7 g

5. ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

Feature

You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMO
The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Description

The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in

Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g


Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.

6. XCSOURCE 5x V3.0 USB Nano ATmega328P 5V 16M Micro Controller Board Module for Arduino (TE359)

Feature

CH340G Replace FT232RL
Operating Voltage(logic level): 5V
There is bootloader installed in it
Support USB download and Power
Support power supply by 9V battery

Description

Description:

CH340G Replace FT232RL

Operating Voltage(logic level): 5V

8 analog inputs ports: A0 ~ A7

14 Digital input / output ports:TX,RX,D2 ~ D13

6 PWM ports: D3, D5, D6, D9, D10, D11

1 pairs of TTL level serial transceiver ports RX / TX

Using Atmel Atmega328P-AU MCU

There is bootloader installed in it

Support USB download and Power

Support for external 5V ~ 12V DC power supply

Support power supply by 9V battery

Package included

5x Mini USB Nano V3.0 ATmega328P 5V 16M Micro Controller Board For Arduino

7. Arduino Nano 33 IoT [ABX00027]

Feature

The ease of use of a Nano board with the addition of secure IoT and BT connectivity
Small (45mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox
Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current
On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating

Description

This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects. The Arduino Nano33 IoT is fully compatible with the Arduino IoT Cloud and supports full TLS secure transport: the ATECC608A cryptochip stores the cryptographic keys in hardware, offering a very high level of security for this class of products. The integration with the Arduino IoT Cloud offers also a very efficient way of setting up online dashboards with little coding and minimal effort. The on-board IMU can be used to wirelessly monitor vibration, orientation, and rotational speed of small objects thanks to its lightweight and compact form factor. Flexible to the requirements of your design, it can be used as a breadboard when mounting pin headers, or s a SMT directly soldered on a PCB thanks to its castellated pads.

8. Arduino Nano 33 BLE Sense

Feature

Small (48mm x 18mm), powerful, Bluetooth connected and with all the sensors you may need to design innovative applications
Built around the NINA B306 module for BLE and Bluetooth 5 communication; the module is based on Nordic nRF 52840 processor that contains a powerful Cortex M4F
The board's architecture is fully compatible with Arduino IDE Online and Offline; it has a 9 axis Inertial Measurement Unit (IMU), temperature, pressure, humidity, light, color and gesture sensors, plus a microphone that are managed through specialised Arduino libraries
Clock 64MHz, Flask 1MB, RAM 256KB
Two 15 pin connectors - one on each side of the board

Description

The Nano 33 BLE Sense's reduced power consumption, compared to other same size boards, together with the Nano form factor opens up a wide range of applications. This allows the design of wearable devices and gesture based projects that need to communicate to other devices at close range. The Arduino Nano 33 BLE Sense is ideal for interactive automation projects thanks to the multiprotocol BT 5.0 radio

9. Arduino Nano Every (3 Boards Pack)

Feature

Small (48mm x 18mm), robust and powerful board Based on the ATMega4809 AVR processor
Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte
Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
Power supply architecture based on a high efficiency DC-DC converter allows powering the board at up to 21V and to drive output peripherals with up to 950mA without overheating
Get started in minutes with thousands of sketches available in open source.

Description

The Arduino Nano Every's tiny size (4818 mm) makes it ideal for wearable projects; in experiments, in prototypes or in a full cosplay setup! Sensors and motors can be connected without too much fuss which means it's great for robotics, drones and 3D printing too. Flexible to the requirements of your design, it can be used as a breadboard when mounting pin headers, or s a SMT directly soldered on a PCB thanks to its castellated pads. The Configurable Custom Logic (CCL) is a great way to get beginners more interested in hardware. We've used a quality USB chip so people won't have connection or driver issues. The separate SAMD11 ARM Cortex M0+ processor handling the USB interface also makes it possible to implement different USB classes such as Human Interface Device (HID) instead of just the classic CDC/UART.

10. Arduino Nano V3.0, Nano Board ATmega328P 5V Micro-Controller Board for Arduino Projects

Feature

Microcontroller ATmega328P
Operating Voltage (logic level) 5 V
Input Voltage (recommended) 7V-12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader

Description

Features:
Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Fully Compatible to Arduino Nano V3.0 ATmega328P-AU
ATmega328 Microcontroller
Bootloader installed, ready to upload sketches from Arduino software
Microcontroller ATmega328P-AU
Operating Voltage :5V
Input Voltage (recommended) 7V-12V
Input Voltage (limits) 6V-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Dimention:Approx. 45x17x19mm
Cable Length:245mm
Color:Blue(as the picture shows)

Package:
1 xNano V3.0 ATmega328P Arduino Compatible Board
1 xMini USB Cable

Conclusion

All above are our suggestions for arduino nano bulk. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using arduino nano bulk with us by comment in this post. Thank you!