Thing need consider when find spindle hub kit?

There are many reasons you might choose to buy spindle hub kit but it is not easy to find the best suitable spindle hub kit for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best spindle hub kit.

Best spindle hub kit

Related posts:

Best spindle hub kit reviews

1. Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-3500545) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

Feature

Pair of 1-3/8" to 1-1/16" tapered spindles.
Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
Spindles feature a SQUARE 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"

Description

Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

2. 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub

Feature

1 1/4" Diameter, 4" long shaft, BT8 1" spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
5-4.5" BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

3. Pair of 5-Bolt On 4-1/2 Inch Hub Assembly - Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

Feature

Pair of 1-1/16" straight spindles includes castle nuts and cotter pins.
Bearings included - (4) L-44649 1-1/16" inside dimension.
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
Spindles feature a 1-1/2" SQUARE stock diameter with a bearing surface of 1-1/16 inch.

Description

Easily build your own axle with this 2,200 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,200 lb axles, (2) - 1-1/16" straight spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 1.987 O.D - 1.50 I.D double lipped grease seals, (4) L-44649 1-1/16" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

4. Rigid Hitch Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2) Square Stock 1 Inch Straight Spindles & Bearings

Feature

Pair of 1" straight spindles includes castle nuts and cotter pins.
Bearings included - (4) L-44643 1" inside dimension.
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

5. Trailer Hub Kit - 5 Bolt on 4-1/2" Bolt Circle With 1 Inch I.D. Bearings

Feature

Fits 2,000 lb. axles with 1" straight spindle
Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
Measures 4-1/4 inches tall (through center of hub)
2,000 lb capacity - 1/2-20 thread - 5 bolt on 4-1/2 inch bolt circle
Read product description below for more information

Description

Hub has 5-bolt pattern on 4-1/2" circle. Hub assembly includes (2) L-44643 inner and outer bearings, SL-122 double lipped grease seal, SCP-100 cotter pin, DC-1505 dust cap, (5) STN-506 lug nuts and pressed in bearing races. Pilot diameter 2.5 inches, flange diameter 5.56 inches.

6. Pair of 4-Bolt On 4 Inch Hub Assembly - Includes (2) 1 Inch Straight Spindles & Bearings

Feature

Pair of 1" straight spindles includes castle nuts and cotter pins.
Bearings included - (4) L-44643 1" inside dimension.
Hubs have pre-installed pressed in races.
Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
Spindles feature a ROUND 1-1/4" stock diameter with a bearing surface of 1 inch.

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (8) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

Optional axle pipe not included. Use keyword "AK-1" to search for it.

7. Rigid Hitch Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

Feature

Pair of 1" straight spindles includes castle nuts and cotter pins.
Bearings included - (4) L-44643 1" inside dimension.
Hubs have pre-installed pressed in races.
Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (8) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

8. Trailer Hub Kit - For 1-3/8" Inner / 1-1/16" Outer Tapered Spindle - 5 Bolt on 4-1/2" Bolt Circle

Feature

Fits 3,500 lb. axles
Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
Capacity 1,750 lbs
Thread 1/2"-20, 5 Bolt on 4-1/2" Bolt Circle
Read product description below for more information

Description

Hub assembly has 5-bolt pattern on 4" circle. Includes L-68149 inner bearing, L-44649 outer bearing, SL-172 grease seal, SCP-100 cotter pin, DC-1505 dust cap, (5) STN-506 lug nuts and pressed in bearing races. Pilot diameter 2.59 inches, flange diameter 6.5 inches.

9. WARN 9790 Standard Manual Hub

Feature

Designed for OEM hub replacement
Lifetime limited warranty
Precision cast hub body
4140 steel clutch ring and inner drive gear
For use with 19 spline axles

Description

WARN Standard Hubs are the ideal choice for factory hub replacement. These are the same basic hubs Warn Industries has supplied to OEMs (Original Equipment Manufacturers) around the world. WARN standard hubs share many features with our Premium Hubs such as a 4140 steel clutch ring and inner drive gear, and a precision cast hub body. All WARN hubs are covered by a lifetime limited warranty. This is a pair (2) of internal mount hubs. For use with 19 spline axles, compatible with many different vehicles.

10. WARN 32720 Spindle Nut Kit

Feature

Service replacement part
For use on WARN hub sets
For maintenance and replacements

Description

This is a service replacement kit, designed to fit with WARN hub sets. This kit was designed to fit the following WARN hub sets: 9790, 29071, and 20990. A spindle nut kit is composed of a various collection of washers, bearing locknuts, and bearing adjusting nuts to aid with maintenance and or replacements.

Conclusion

By our suggestions above, we hope that you can found the best spindle hub kit for you. Please don't forget to share your experience by comment in this post. Thank you!