Thing need consider when find sawstop overarm dust collection?

There are many reasons you might choose to buy sawstop overarm dust collection but it is not easy to find the best suitable sawstop overarm dust collection for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best sawstop overarm dust collection.

Best sawstop overarm dust collection

Related posts:

Best sawstop overarm dust collection reviews

1. SawStop TSA-ODC Over-Arm Dust Collection Assembly

Feature

Compatible with the 36-inch and 52-inch SawStop Contractor Saws.
Fits all SawStop T-Glide rail systems
Requires Sawstop Dust Collection Blade Guard.
Custom Y-Port unites above and below-table dust collection into one 4 port. (Requires Contractor Saw Dust Collection Panel).
Easy and quick installation.

Description

The Overarm Dust Collection Assembly removes dust up and out of the way. This unit is compatible with all SawStop Cast Iron saws (Jobsite Saw not included). Fits all SawStop T-Glide rail systems (not 30" CNS rail kit). Connects directly to SawStops Dust Collection Blade Guard (TSG-DC required). Custom Y-Port unites above and below-table dust collection into one 4 port.

2. SawStop TSG-FDC Floating Overarm Dust Collection Guard

Feature

Blade guard dimensions 3 1/2" x 18 1/2"
Distance between blade and end of extension table 35 3/4" to 68"
Inner dust tube diameter 3" outer dust tube diameter 4"
Outer dust tube height above table 13 1/2"
Outer dust tube height above floor 33 1/2" to 50"

Description

This heavy-duty 4 overarm is designed to provide operator protection while removing table-top dust in both standard and non-through cuts. The transparent blade cover is engineered to lift easily for Quick blade access, and the rigid steel overarm swings smoothly away and back into operating position. The wide pipe allows for high air volume Collection.

3. Dust Collection Blade Guard

Feature

Collect 99% of above-table dust
Independent lateral slides minimize blade exposure
Low profile to allow for cuts as narrow as 3/4 of an inch
Attaches directly to customer's dust collection system
Compatible with SawStop Overarm Dust Collection

Description

Upgrade your SawStop Cast-Iron Saw with above-table dust collection on your 1.75HP Cast-Iron SawStop Table Saw (not compatible with Jobsite Saw). This item comes standard on 3HP and larger SawStop Cast-Iron table saws. Collect the majority of above-table dust with this handy, easy to assemble and mount accessory. The independent lateral slides minimize blade exposure, while the low profile allows for cuts as narrow as 3/4". The dust port attaches directly to customer's dust-collection system and is compatible with SawStop Overarm Dust Collection Assembly.

4. PSI Woodworking TSGUARD Table Saw Dust Collection Guard

Feature

Protects you from hazardous table saw debris
Hood is constructed from one-piece, clear shatterproof plastic
Accepts saw blades up to 16-inch
Connects to standard 4-inch duct system
Adjusts easily to suit thickness of material being cut

5. SawStop CNS-DCP Contractor Saw Dust Collection Panel

Feature

2.5" and 4" ports fit most dust collection systems
Easy-to-use clamps make redirecting the internal tube a breeze
Quick and easy to install
Durable materials
Required for installation of Overarm Dust Collection

Description

Specifically designed for the CNS Contractor Saw, this control panel is a versatile dust-collection accessory that fits 2-1/2" and 4" dust-collection systems. This is to be used in conjunction with the Overarm Dust Collection Assembly (#846909) and under the table dust-collection with a simple "T" Hose Fitting. Easy-to-use clamps make redirecting the internal tube a breeze.

6. SawStop RT-DCB Downdraft Dust Collection Box for Router Lift

Feature

Collects below-table dust
Connects to 4" dust tube
Compatible with all SawStop Router tables

Description

Engineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangable panels for optimum dust port and Vent placement. Plug the 2.25" dust hose from the router fence directly into the dust box's branch inlet, and let the 4" port deliver above and below Table dust from the same port.

7. SawStop RT-FLS Flip Stop for Router Fence

Feature

Designed to quickly give you accurate, repeatable measurements
Compatible with all SawStop Router fences
Top-mounted dovetail track allows for easy travel and quick lockdown

Description

Designed to fit SawStop RT fence assemblies, this flip stop is built to facilitate repeated cuts with precision.

8. SawStop OFT30-CNS-000 30-Inch Out-feed Table Assembly

Feature

30 of additional out-feed space
Adjustable feet for a level work surface
Designed specifically for use with the T-Glide Professional Series Fence System
Sturdy black powder-coated legs
Outfeed table not compatible with mobile base or job site cart

Description

Specifically designed for the CNS Contractor Saw, the outfeed table provides 30" of additional outfeed support. It is constructed of smooth 3/4" polyurethane coated MDF with machined miter gauge slots and all steel hardware. The unit comes complete with sturdy black powder-coated legs with adjustable feet for a level work surface. Designed specifically for use with the T-Glide Fence Systems, this unit is not compatible with the 30" Aluminum Extrusion Fence System, SawStop mobile base or SawStop jobsite cart.

9. Grizzly T10113 - Universal Overarm Blade Guard For Table Saws

Feature

Capture the dust that's thrown above the saw by the higher escape velocity of the spinning blade this universal overarm blade guard is totally self s
This universal overarm blade guard is totally self supporting so there's no complicated installation process
Just bolt it to your saw base for total stability

Description

Capture the dust that's thrown above the saw by the higher escape velocity of the spinning blade. this universal overarm blade guard is totally self supporting so there's no complicated installation process. just bolt it to your saw base for total stability. it also extends for saws with wide rip capacities and pivots out of the way for complete versatility. features include a simple 4-Inch dust hose connection see-through blade guard and 6-1/2-Inch vertical adjustment at the guard. this heavy-duty universal overarm guard is fully adjustable to fit any cabinet style table saw. finally a simple system for complete table saw dust control. for use on saws equipped with a riving knife/splitter or other anti-kickback device. this overarm blade guard provides no kickback protection. approximate shipping weight: 75 lbs.

10. SawStop TSA-SA48 Sliding Crosscut Table Attachment

Feature

This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity.
The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58".
Adjust the table to fit your needs.
Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time.

Description

Engineered and finished to fit your SawStop Contractor, Professional Cabinet or Industrial Cabinet Saw, the Sliding Crosscut Table is the finest quality crosscut table available. It delivers repeatable, accurate results with ease and beauty. The oversize fence miter turns at the twist of a single knob, and measures to a full 60 degrees. Easily slide the fence in for blade proximity, and choose a flush or "maximum throw" installation to fit your shop and space requirements.

Conclusion

All above are our suggestions for sawstop overarm dust collection. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using sawstop overarm dust collection with us by comment in this post. Thank you!