The 10 best water solenoid valve 24v 2020

We spent many hours on research to finding water solenoid valve 24v, reading product features, product specifications for this guide. For those of you who wish to the best water solenoid valve 24v, you should not miss this article. water solenoid valve 24v coming in a variety of types but also different price range. The following is the top 10 water solenoid valve 24v by our suggestions:

Best water solenoid valve 24v

Related posts:

Best water solenoid valve 24v reviews

1. Eagleggo Humidifier Water Valve for Aprilaire 4040 Solenoid Valve 24 Volt Humidifier Models 400, 500, 600, 700, Part No. B2015-S85

Feature

The 4040 by Eagleggo is a replacement humidifier solenoid valve.
For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.

Description

About:
The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.

Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.

Does not work on models 330, 445, 110, 112, 350 and 360.

For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz

2. Aprilaire 4040 Solenoid Valve, 24 Volt for Aprilaire Whole House Humidifier Models 400, 400M, 500, 500M, 600, 600M, 558, 550A, 550, 568, 560A, 560, 700, 700M, 768, 760A, 760

Feature

Genuine Aprilaire humidifier replacement part
Made in Madison, wi, usa
Ensures that the right amount of humidity is delivered into your home
Controls how much moisture enters your humidifier, making it possible to maintain proper humidity levels throughout your home
Compatible with all Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360

Description

Proper humidification of your home is important for protecting your familys health and the beauty of your home. The 4040 24 Volt solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid Valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.

3. Gems Sensors A2012-S150 Solenoid Valve, 24 V, 60 Hz AC, 125 PSI

Feature

Replacement solenoid valve for commercial and in-home humidifiers
Fits Aprilaire Models: 110, 112, 220, 224, 350, 360, 440, 550, 550A, 550-A, 558, 560, 560A, 560-A, 568, 600, 700, 760, 760A, 760-A, and 768. Replaces OEM valve models A2012-S118, B2035-S2, B2035-S5, B2035-S54, B2035-S55, B2015-S51, B2015-S54, B2015-S58, B2015-S65, B2015-S68, B2015-S85, B2015-S87
Rated to 125 PSI supply pressure
24VAC, 50/60 Hz
In-line strainer supplied

Description

Originally designed and manufactured for original equipment manufacturers (OEMs), this solenoid valve is now available as a replacement solenoid valve for in-home and commercial humidifiers. This humidifier solenoid valve has a brass body and is constructed with an in-line strainer for added protection to humidifier water lines.

4. 4040 Replacement Humidifier Valve for Whole House Humidifiers Compare to Aprilair Part No. 4040 | 24 Volts | 2.3 Watts | 60 HZ By: Alpine Hardware

Feature

The 4040 by Alpine Hardware is a replacement humidifier solenoid valve.
For Whole House Humidifiers 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.

Description

About:
The 4040 by Alpine Hardware is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.

Specifications:
-24 Volts
-2.3 Watts
-60Hz
-Orifice (3/32-3/64) NOT INCLUDED
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.

5. Humidifier Valve 4040 Solenoid Valve Brass Air Valve Compatible with Aprilaire Fit for 400 500 600 700 Humidifier 24 Volt

Feature

Application: the 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360
Function: the humidifier solenoid valve can control how much moisture enters into your humidifier to make it possible to maintain proper humidity levels throughout your home
Replace numbers: 332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3
Easy to apply: the installation of the solenoid valve is very easy, just using a screwdriver and wrench can accomplish and it only takes few minutes to install it
Durable material: the humidifier is made of durable brass material and copper wires, which can serve for long time usage, you can apply it for a long period

Description

Features:

Application:
The 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360.

Replace numbers:
332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3.

Installation steps:
Step 1: disconnect the humidifier: shut off the water supply to the unit.
Step 2: remove the solenoid: unclip the wires from the solenoid, using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube, then let any remaining water drain into the plastic container, disconnect the water supply, use a screwdriver to unscrew the screws and discard the old solenoid.
Step 3: install the solenoid: align the new solenoid and then tighten the screws, then connect the water supply line, replace the distributor tube and tighten the compression nut, finally connect the wires to the solenoid.
Step 4: reconnect the humidifier.

Specification:
Material: brass and copper wire
Model number: 4040
Watts: 2.3
Orifice: 3/ 64
Volt: 24/ 60V
MOPO: 125

Package quantity:
1 x 4040 Solenoid valve

Note:
All the brand names and models mentioned are not applied as trade marks, just work as product adaptability.

6. 1/2" Stainless Steel Electric Solenoid Valve 24V DC N.C. VITON Water Air Fuel

Feature

U.S. Solid valve- industrial grade products.
1/2
ISO/OEM/ODM/CE
1 year warranty. Contact [email protected]
Versatile, small, responsive, light and durable.

Description

U. S. Solid Normally Closed Electric Solenoid Valve;

1/2"ports, stainless steel body, Viton seal, 24 volt DC, for air, water, or fuel

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality stainless steel body, two-way inlet and outlet ports with one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.

The direct current coil energizes at 24 volts DC; voltage range + or - 10%. 18 Watt power rating.

Semi-direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.

1/2" (16 mm) flow aperture permits a unidirectional flow capacity of 4.8 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (4.8 Cv).

Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Manufactured in China. Model: USS2-00072. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

7. DIGITEN 24V 1/4" Inlet Feed Water Solenoid Valve for RO Reverse Osmosis Pure System

Feature

DC 24V 1/4" Solenoid valve.
Turn on water when system start;and cut off water when system stop.
Working pressure:0-0.8Mpa.
Rated power:4.8W.

Description

Turn on water when system start;and cut off water when system stop. Food Quality and suitable for Reverse Osmosis water system,etc.

8. Replacement 4040 Humidifier Valve for Aprilaire Solenoid Valve, Part No. B2015-S85 | 24 Volts | 2.3 Watts | 60 HZ By: Eagleggo

Feature

The 4040 by Eagleggo is a replacement humidifier solenoid valve.
For Aprilaire Humidifiers 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.

Description

About:
The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.

Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.

Does not work on models 330, 445, 110, 112, 350 and 360.

9. Mudder B2015-S85 B2017-S85 4040 Solenoid Valve Humidifier Valve Compatible with Aprilaire Humidifier 220 224 400 440 500 550 558 560 600 700 24 Volt 2.3 Watts 60 Hz

Feature

Application model: the B2015-S85/ B2017-S85 solenoid valve is comparable to model 4040, compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360
Function introduction: the humidifier solenoid valve controls how much moisture enters the humidifier, enabling it to maintain proper humidity levels throughout your home
Humidifier valve features: applicable voltage is 24 volts, the power is 2.3 watts, frequency is 14 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers
Easy to install: the installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes, please note that our products do not include the installation tool
Durable material: the humidifier valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time; Note: please check the relevant size information carefully before purchasing

Description

Note:
The brand we mentioned is only to illustrate the suitability of the product, not as a trademark.

Wide application:
The solenoid valve is compatible with Aprilaire models, such as 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360.

Installation steps:
Firstly, disconnect the humidifier and shut off the water supply to the unit.
Secondly, remove the solenoid. Unclip the wires from the solenoid. Using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube. Let remaining water drain into the plastic container. Disconnect the water supply. Use a screwdriver to unscrew the screws and discard the old.
Thirdly, install the solenoid. Align the new solenoid and then tighten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut.
Finally, connect the wires to the solenoid and reconnect the humidifier.

Specification:
Model No.: B2015-S85/ B2017-S85
Watts: 2.3 watts
PSI: 125
Volt: 24 V
Orifice: 3/32 inch, 1/4 inch
Material: brass and copper wire

Package includes:
1 x Humidifier valve

10. DIGITEN 24V 1/4" Water Solenoid Valve Inlet Feed Normally Closed N/C Quick Connect for RO Reverse Osmosis Pure System

Feature

DC 24V 1/4" Solenoid valve.
Turn on water when system start;and cut off water when system stop.
Working pressure: 0.02-0.8Mpa.
Rated power:4.8W. It will become hot when it works because there are so many coils inside. It's normal and safe phenomenon. The highest working temperature of this product reaches 60.

Description

Turn on water when system start;and cut off water when system stop. Food quality and suitable for Reverse Osmosis water system,etc.

Pay attention
Few buyers use our N/C normally closed solenoid valve to make it work long hours t would become very hot because there are so many coils inside. It's normal and safe phenomenon. We continually tests and tracks the product's working status, the highest working temperature of this product reaches 60, and the plastic part withstand extremely high temperatures to 150. But this operation is unreasonable. In the product reviews, some buyer also mentioned if someone requires the solenoid valve works for a long time, he should buy N/O normally open solenoid valve, so that it will open all the time without power and will not be hot.

Conclusion

By our suggestions above, we hope that you can found the best water solenoid valve 24v for you. Please don't forget to share your experience by comment in this post. Thank you!