It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 scroll saw quick change. Its followed by an in-depth review of each scroll saw quick change. Hopefully, once you are done reading this article, you will be well informed about scroll saw quick change and be able to select the right scroll saw quick change for you without any hesitations.
Best scroll saw quick change
Related posts:
Best scroll saw quick change reviews
1. WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw
Feature
2.5 amp motor rotates the blade up to 2500 feet per minuteCreate cuts up to 3-1/2 inches deep and 9 inches wide
Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty
Description
Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because its a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.2. Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories RK7323
Feature
Portable tabletop saw sets up in seconds to cut wood, metal, tile, aluminum and plastic -performs rip, scroll, miter, and inside cutsCompact and portable with built-in tabletop handle to carry anywhere - weighs in at less than 15 pounds
Hold-down guard and splitter cuts wider material, and a larger rip fence for better control and a nice, accurate cut
Instant, tool-free blade changes; change the blade in 3 seconds - compatible with any 4" t-shank jigsaw blades
Includes a vacuum port, a large steel rip fence, miter gauge, 5-piece starter blade set and manufacturer's 3-year warranty
Description
The all new Rockwell RK7323 BladeRunner X2 is the Ultimate Cutting Machine. The updated version now provides better capacity and control than the original Bladerunner. The addition of a tabletop handle designed for portability, a hold-down guard and splitter that cuts wider material and a larger rip fence for better control take the BladeRunner to a new level. This versatile and convenient saw that sets up in seconds to cut wood, ceramic tile, plastic, metal and aluminum. The BladeRunner uses standard t-shank jigsaw blades with instant, tool-free blade changes which allows you to go from cutting one material to another quickly and easily. The BladeRunner frees up both hands for precise control of the material being cut so you can make a nice, accurate cut without having to control the saw with one hand and the material with the other. The traditional guard and splitter system allows for unlimited capacity for cross and rip cuts. The BladeRunner X2 is also easy to carry anywhere with its lightweight and compact design and built-in carry handle. The included accessories are a miter gauge, rip fence, general purpose blade for wood, scroll cutting blade for wood, a tile blade for ceramic tile, a metal cutting blade and an aluminum cutting blade. There is a built-in vacuum port that makes clean-up easy and a blade-holding compartment to keep your blades with the tool. Go ahead and start cutting, the BladeRunner X2 will make a variety of cuts that you would need multiple other tools to do.3. DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw
Feature
Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cutsExclusive tool-free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 in
On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
Arm lifts so blade can be easily threaded through the material for inside cuts
Description
Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included.4. BUCKTOOL 16-inch Variable Speed Scroll Saw Pin or Pinless Blade with Pedal Switch Cast Iron Work Table
Feature
Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth PerformanceLED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth
Description
The Bucktool Model SSA16LVF 16-Inch Scroll Saw is perfect for any woodworker that's looking for a quality scroll saw at a reasonable price. The 9-Inch by 16-Inch cast iron table tilts 0-45 degrees for greater stability and low vibration.
The Bucktool SSA16LVF Scroll Saw provides the user with the flexibility to work with a variety of materials. Well designed blade holders can make sure long life of blade and easy changing at this price level. New side panel with quick open door for easy hand access to change blade.
Fixed LED in the front ensures a vibration-free lighting. A flexible dust blower can blow at any direction for better sawdust removal.
The speed of the 5-Inch blade can be varied from 550 to 1650 strokes per minute. Cutting depth is 2-Inch with a 16-Inch throat depth. With pedal, switch operate your tools with hands-free convenience and easily stop tool with the tap of your foot when you need to drill a new hole, change blades, or if an emergency occurs.
5. Hegner 18" Variable Speed Scroll Saw
Feature
Double Quicklock Tensioning SystemElectronic Variable Speed Induction Motor
Highly Precise and Reliable
7 Year Manufacturer's Warranty against defects
Recommended Stand sold separately on this site
Description
The HEGNER 18" Variable Speed saw is compact, quiet, precise and versatile, lets you cut almost any material and make a wide variety of projects. HEGNER scroll saws are known for easy blade installation, long blade life, superb cutting control, smooth and quiet operation, accurate sawing, smooth edges without sanding, and unsurpassed reliability. The 18-V is Hegner's most popular model.6. Shop Fox W1713 16-Inch Variable Speed Scroll Saw
Feature
1/8HP, 1.2-Amps, 110-Volt, 60Hz motor16-Inch maximum cutting width
Includes a gooseneck work light, dust blower and dust port
Plain or pin blades
No load speed: 550-1700 SPM
Description
Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. The Shop Fox Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45-degree tilt table and easy blade changes.7. Dremel MS20-01 Moto-Saw Variable Speed Compact Scroll Saw Kit
Feature
Dust port adapter keeps line-of-sight clear and work space cleanAuto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
Detachable coping function for handheld use to take the tool to the work piece
Variable-speed control for optimal cutting in a variety of materials
Fast-clamp base attaches to various tables, benches and surfaces
Blue edge guide locking levers illustrated on packaging are not included in the kit and do not affect performance of the tool
Description
The Dremel Moto-Saw offers a compact and easy solution for making detailed cuts in a variety of materials including wood, plastic, laminates and metal. This portable, precision-sawing tool is easy to store, set-up, and operate and features a tool-free mechanism for quick blade changes. The Moto-Saw functions as a stationary scroll saw yet it can be removed from its base to become a portable motorized coping-saw.8. DEWALT DCS331B 20-Volt MAX Li-Ion Jig Saw
Feature
All-metal lever-action keyless blade change allows for quick and easy blade changesAll-metal keyless shoe bevel with detents at 0, 15, 30 and 45 provides versatility for easy bevel cutting
4-position orbital action provides control of cut quality and speed
Adjustable dust blower keeps line of cut clear of chips
Variable speed 0-3,000 spm for versatility in a multitude of materials and applications
Description
The DEWALT DCS331B 20V MAX Jig Saw offers an all-metal lever-action keyless blade change which allows for quick and easy blade changes, along with an all-metal keyless shoe bevel with detents at 0Degree, 15Degree, 30Degree and 45Degree that provides versatility for easy bevel cutting. The 4-position orbital action provides control of cut quality and speed, and an adjustable dust blower keeps line of cut clear of chips. It features variable speed of 0-3,000 spm (strokes per minute) for versatility in a multitude of materials and applications, along with an anti-slip comfort grip for increased comfort and control. This jig saw accepts T-shank jig saw blades for professional results. Includes: DCS331 Jig Saw, and jig saw blade. This is a bare tool item (battery sold separately).9. Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw
Feature
Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applicationsDual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0 - 45 left and right. Motor: 1.3 Amp
Description
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.Motor: 1.3 Amp
Speeds: 400-1,750 SPM
Capacity: 20 in.
Stroke Length: 3/4 in.
Table Size: 16 in. x 24 in.
Table Tilt: 0-45, Left and Right
Cutting Capacities: at 90: 2 1/8 in. at 45: 1 5/8 in.
Assembled Depth: 39 in.
Assembled Width: 16 in.
10. DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity
Feature
Rack & Pinion Fence System Make fence adjustments fast, smooth and accurate32-1/2" Rip capacity easily cuts a variety of larger shelving and trim materials
15 Amp motor quickly rips through hardwoods with ease
Rolling stand designed for easy set up and breakdown with excellent stability
2-1/2-Inch Dust Collection Port easily connects to a vacuum for efficient dust extraction
Description
Functionality and Portability
The DEWALT DWE7491RS 10-inch Jobsite Table Saw with 32-1/2 inch (82.5cm) Rip Capacity and a Rolling Stand features a rack & pinion fence system which makes fence adjustments fast, smooth and accurate. The 32-1/2 inch rip capacity easily cuts a variety of larger shelving and trim materials - the patented material support allows this to be used for narrow rip cuts. This unit features a 15 amp motor which quickly rips through hardwoods with ease. The telescoping fence rails easily extend and retract to create a small portable package and the flip-over ripping fence allows for narrow rip cuts.
This saw offers 3-1/8 inch depth of cut at 90 degrees and 2-1/4 inch at 45 degrees. A 2-inch dust collection port easily connects to a vacuum for efficient dust extraction to keep clean up at a minimum. The rolling stand is designed for easy set up and breakdown with excellent stability, and features large heavy duty wheels that easily roll over steps, curbs, and jobsite debris. The 26-1/4 inch X 22 inch table provides superior material support. This unit features an on-board storage system which provides easy access to the Site-Pro Guard components and push stick when not in use.
Common Applications
- Cabinet Installers: ripping filler boards.
- Hardwood Floor Installers; ripping floor boards.
- Trim Carpenters: ripping moldings, wainscoting, ripping and cross cutting 1X material for framing book shelves and entertainment centers, ripping framing lumber.
- Deck Builders: ripping deck boards, rail cap, railing.
- Remodelers: ripping framing lumber, sheet material (4 feet X 8 feet).
- Serious Woodworkers: home hobbyists, ripping sheet material (4 feet X 8 feet), framing lumber, (2-inch X 12-inch), sizing material up to 3-inches thick, ripping and cross cutting 1X material used for dados, rabbets, mortise and tenons.
What's in the Box
- Jobsite Table Saw
- 10-inch 24-Tooth Carbide Blade
- Rolling stand
- Push Stick
- Miter Gauge
About DEWALT
DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.
