Looking for a carving bits 1/8? Have a look at this 2020 guide!

We spent many hours on research and managed to find top 10 carving bits 1/8 that is best suitable for you. This review is based on reliable sources, product specs, and hundreds of customer reviews. In this article, were going to highlight the main features of the best carving bits 1/8 and why they are important when it comes to choosing the right one.

Best carving bits 1/8

Related posts:

Best carving bits 1/8 reviews

1. K Kwokker Tungsten Carbide Burrs Diamond File Carving Bit for Dremel Rotary Drill Die Grinder 1/4inch Head 1/8inch Shank HRA85 Machining Hardness fits Rotary Drill DIY, Wood Carving, Metal Polishing

Feature

[1/8'' Shake 1/4" Cutting Dia Carbide Rotary Burr Set] K Kwokker 10Pcs Rotary Burrs. Shank dia: 3mm(1/8''), Cutting dia: 6mm(1/4"), fits Dremel tools and most small rotary tools. 10 different types of drill bits,meet your different needs.
[Very Well Made And Tough As Nails, Nice Tungsten Carbide] Made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection.
[Safe And Efficient, Like a Hot Knife Thru Butter] Suitable for the processing of woodworking, aluminum, plastic, metal, stone, glass fiber, porcelain and other material.
[This Is a Essential Tungsten Carbide Burrs Kit] for woodworkers & enthusiasts. NOTE: When using the woodworking accessories, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are recommended to prevent stab wounds.
[Warmth Tips] The speed of the rotary tools usually is 6000-50000 revolutions per minute, long service life, reduce the inefficiency turnover. Easy to cutting, durability.

Description

Specification:
Material: tungsten steel
Quantity: 10pcs
Total length: 40-50 mm
Cutting diameter: 1/4 Inch(6mm)
Shank length: 35mm
Shank diameter: 1/8 inch(3mm).
Suggested RPM: 25000-50000, Max RPM 70000.

SD-1: Ball shape 1/4"X7/32"-1/4"shank.
SD-3: Ball shape 3/8"X5/16"-1/4"shank.
SF-3: Tree shaped radius end 3/8" x 3/4"-1/4"shank
SF-5: Tree shaped radius end 1/2" x 1"-1/4"shank
SA-5: Cylindrical shape 1/2" x 1"-1/4"Shank
SA-3: Cylindrical shape 3/8" x 3/4"-1/4"Shank
SC-1: Cylindrical radius end 1/4" x 5/8"-1/4" shank
SC-3: Cylindrical radius end 3/8" x 3/4"-1/4" shank

Uses:
1.Machining various kinds of metal material including HRC65 hardened steel
2.Having long life of ten times than high speed steel burrs and fifty times than small emery wheels
3.Finish machining various kinds of die cavities
4.Removing the burrs of the castings,forgings and the welding spatter on the weld assemblies
5.Chamfering angle,circular bead or flute on the mechanical components
6.Grinding the hole to an accurate shape,Polishing the impeller channel
7.The machines which are used for Carbide Rotary Burrs are usually hand-held,powered either by compressed air or electricity Be careful about mounting and handling the burr correctly

Package Includes:
10 x Rotary burrs set

2. HUHAO Spiral 60 Degree V Groove Engraving Tool Flat Bottom CNC Router Bits 1/8 Inch Shank for Aluminum MDF Hard Wood Copper 5PCS

Feature

Material:tungsten steel
Sngraving router bits set,Spiral flute cutting tool,Straight 1/8 inch shank v-bit,Cutter for Aluminum MDF Hard Wood Copper,CNC router bits v groove,Mirror finish,Woodworking,High precision
Shank diameter:3.175mm(1/8 inch); Degree:60; Cutting edge diameter:0.1mm; Total length:36mm
CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency. Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
PAKAGE CONTENT: There are 5 pieces of CNC Router Bit in one package, coming with storage case.

Description

HUHAO 5Pcs 1/8" Single Flute V Groove CNC Router Bits
Feature:
HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency.
SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
PERFECT CUTTING: The mirror polishing of CNC Router Bit makes smooth cutting,non-stick crumbs, not black, increase the speed.
WIDE APPLICATION: CNC Router Bit is capable to use in materials such as hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
USAGES: Carving, Cutting, Slotting, Milling, Hollow Cutting
SUITABLE MATERIALS: Acrylic, PVC, MDF, medium-density board, lotus board, Solid wood, wood, plastic plate, double color sheet, hardwood,Nylon, Resin, ABS, Aluminium etc.

Specifications:
-Color: Silver
-Material: CNC
-Total length: 36mm = 1.42 inch
-Shank diameter (SD): 3.175mm = 1/8 inch
-Cutting edge diameter (CED): 0.1mm = 0.003 inch
-Degree: 60

Package included:
5 x 1/8" Single Flute Tungsten Steel Spiral CNC Router Bit

Note:
Stop immediately in the processing of anomalies when using the CNC Router Bit and find out the reason before processing;
Pay attention to the condition of wear and tear of the cutting edge and timely repair the CNC Router Bit.

Why Choose HUHAO
Good quality and reliable brand.
Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
24-hour feedback excellent customer service.

3. Atoplee 10pcs 1/8" Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Rotary Tool for Woodworking Drilling Carving Engraving

Feature

10pcs Tungsten steel solid carbide burrs for DIY enthusiast or hobby and craft fan, and give your rotary tool even more functionality with this set of diamond burrs.
Shank Diameter: 3mm; Drill Bit Size: 6mm
Works with mostly small rotary tools for DIY carving fans.
Material: Tungsten Carbide
Use: Rotary Burr

Description

Specification:

Shaft Diameter: 3mm
Drill Bit Size: 6mm
Compatibility: smaller rotary tools.
Included: 10 Tungsten Steel Solid Burrs in a Storage Box
It is recommended to use water as a lubricant when using these burrs. All burrs in this set have a shank size of " (3 mm), allowing them to be compatible with most die grinders and rotary tools as you shape, grind and finish your work with precision. When the job or project is complete, you'll be happy to place your burrs back into the compact storage case so you can store, organize, and transport this set for future use.

Package Included: 10pcs Rotary Tools

4. 10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling

Feature

LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
DOUBLE DESIGN: Double groove because the lines are crossed, more suitable for the object density is relatively low. For example: Carbide burr straight used in the wooden. Plastic. Aluminum material on! With cross-grain chip quickly, in the grinding and carving time.
SUITABLE FOR MOST TOOLS: 10 pieces Double Cut Solid Carbide Rotary Burr Set carbide burr set, fits most small rotary tools,Woodworking Drilling Carving Engraving, making DIY carving fans much easier to do the wood working job.

Description

Features:
Carbide rotary burr set processing all kinds of metal(burr bits for metal carbide burrs for steel including all sorts of hardened steel) and non-metal (such as marble, jade, bone).
Machining hardness reach HRA85.
For the most work rotary burr set can be replaced with small grinding wheel,and no dust pollution.
High efficiency, high-quality finish, long service life, good economic returns.
Easy to use, safe and reliable, can reduce labor intensity.
Mechanical parts chamfering, rounding and groove processing.
Dual Chamber is crossover lines, not easy to block the lines, more suitable for the object of relatively low density material.v 10 different types: Oval, inverted cone, pointed cone,ball nose cone,ball nose, pointed tree nose,flame,ball,cylinder with round head, cylinder with end cut.

Uses:
Cleaning trimming,veining and weld joint of casting, forging and weldment.v Finishing all kinds of metal molds.
Impeller passage of finishing processing.
A variety of mechanical parts chamfer,round and groove processing.
Inner hole surface of machinery parts finishing.
The process of various metal and nonmetal sculpture.

Package include:
10 Pieces 3 x 6mm carbide burr

5. SpeTool Spiral Router Bits With Up Cut 1/8 Inch Cutting Diameter, 1/4 Inch Shank HRC55 Solid Carbide End Mill For Wood Small Cut, Carving

Feature

Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length
For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4" collet
Industrial quality control to ensure best performance

Description

Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

6. Bestgle 10Pcs Titanium Router Bits 1/8" Shank Carbide Engraving Milling Cutter Bit Set Compatible with Dremel Rotary Tools for DIY Woodworking, Carving, Trimming, Drilling

Feature

Made of high quality high speed steel for long life and exceptionally precise cuts the first time, saving you energy and stress
10pcs Router Bits including straight, trim, V groove, beading, cove, slot cutter and more to meet your different needs
Easy to use - large capacity chip groove, and spiral cutting edge sharp, greatly enhance the efficiency and quality of products
Shank diameter: 3mm(1/8"), length: 38mm, easy to insert into most mini-grinding rotary tools including Dremel, Craftsman, Chicago and more
Can be used for detailed woodworking, trimming, engraving, milling, routing slotting, this routing bit works on soft wood and metal including wood, ABS, acrylic, PVC, plastics, etc

Description

Specifications:

Material: high speed steel

Coating: titanium

Diameter of Shank: 3mm (1/8")

Length of Shank: 38mm (1.49")

Package Included :

1x Slot cutter Diameter 3.2mm

1x Slot cutter Diameter 5.0mm

1x Slot cutter Diameter 6.5mm

1x Rounding over cutter Diameter 6.4mm

1x V-Slot cutter Diameter 6.5mm

1x Combi cutter 6.5/2.5mm

1x Core box bit 3.2mm radius

1x Rebating cutter 6.4mm

1x Edge cutter with pin Diameter 5.0mm

1x Half round cutter Diameter 13mm

Caution: When you use this drill bits, the material (eg. wood, ABS, Acrylic, PVC, plastics etc) temperature will get very high, please add some water or coolant to avoid the material get smoke when using it.

7. Metal Engraving Bit, EnPoint Carbide Tough Tip Cone Shape Metal Engraving Bit with 2-Flute Striaght Grooves 1/8" 3.175mm Shank 0.1mm Tip 60 CNC Marking Conical V-Bit for Steel Aluminum Brass MDF Wood

Feature

An exceptionally durable tool bit for lasting longer than other engraving tools when engraving metal
Designed with a sharper cutting edge that provides a cleaner cut when cutting aluminum and brass
Unique V design maximizes the tip strength by removing the minimum amount of material from the end
Produced from an Ultra-Fine, Submicron, Nano Grade Solid Carbide for maximum tool performance
High precision grinding and great concentricity for reducing chance of burr and deviation

Description

Feature
100% Brand new, never used, precision grinding
Ultra-Fine, Submicron Solid carbide made, high quality and corrosion resistant, durable service

Specification
Product Type: 2 flutes straight grooves cone metal engraving bit
Material: solid carbide
Shank Diameter: 3.175mm(0.125 inch)
Tip Diameter: 0.1mm(0.004 inch)
Total Length: 38mm(1.496 inches)
Cutting Angle: 60 degree

Application
1. It is mainly used for the engraving and marking of stainless steel, aluminum, brass, medium density fiberboard, wood panels, plastic and many other soft gummy materials.
2. Use for rotary engraving with spring loaded engraving tools, CNC milling machines, collets, end mill holders and top loading engraving machines etc..

8. Double Cut Carbide Burr set 1/8 Shank | Tungsten Carbide Burs Rotary File Burr Carving Grinding Bit Set for Die Grinder Rotary Drill Dremel Tool - 20pcs

Feature

Designed for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
For jewelers, lapidary use, hobbies, crafts, craft modeling, home repair, DIYer etc...
Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder
Suitable for deburring and polishing cast iron, cast steel, carbon steel, alloy steel, stainless steel and other materials.
Sharp and sturdy, processing all kinds of metal and non-metal. The machining hardness can reach to HRC70.

Description

Product specification:

shank 3mm

Cutter head size: 3mm

Quantity: 20 pcs

Cutter pattern: double cut

Material : solid tungsten carbide steel

size and weight100X65X15mmtotal weight: 100 gram

pakaging : transparent plastic case

The PROBURS 20 Piece Double Cut Solid Carbide Rotary Burr Set includes 10 different type of assorted burrs, each type have 2. Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool)

9. HQMaster CNC Router Bit Set Combo, Spiral Upcut Router Bits 4 Flute/2 Flute End Mill Milling Cutter Tungsten Steel Engraving Cutting Carving Woodworking Tool Acrylic Solid Wood MDF (2 Type Each 10Pcs)

Feature

Package contents ---- 2 type bits each 10pcs assorted in 2 storage cases (will meet most standard milling applications), including 2-flute 3.175mm shank spiral bits/4-flute 3.175mm shank spiral bit
Premium quality ---- Precision edge-grinding technology; long service life, not easy to break; Excellent cutting results and enhanced productivity
Wide application ---- Used for carving, cutting, engraving, milling, dadoing, boring, routing, slotting in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc.
High efficiency ---- These bits own sharp edge which is able for fast engraving that makes high efficiency; Fast chip-removal speed leaves an unobstructed path for the end mill
Perfect cutting ---- The design of 2-flute/4-flute, mirror polishing and larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal

Description

Specifications:

2 flutes 3.175mm shank flat nose spiral bits:
Upcut spiral router bits, made with solid carbide
Shank diameter (SD): 3.175mm (1/8") approx.
Cutting edge diameter (CED): 3.175mm (1/8") approx.
Cutting edge length (CEL): 17mm
Overall length (OAL): 38.5mm
Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
Ideal for 3D relief sculpturing, cutting, engraving, slotting, milling etc.
Quantity: Pack of 10 (coming with storage case)

4 flutes 3.175mm shank spiral bits:
Material: tungsten steel
Shank diameter (SD): 1/8" (3.175mm)
Cutting edge length (CEL): 17mm
Overall length (OAL): 38.5mm
Quantity: Pack of 10 (coming with storage case)
Storage case size: 55*55*9 mm

Note:
Stop immediately in the processing of anomalies when using the CNC Router Bit and find out the reason before reprocessing.
Pay attention to the condition of wear and tear of the cutting edge and timely check the CNC Router Bit.

Safety instructions:
1. The bladed product is not for people under 18 years.
2. The item is only used for industrial cutting not hazardous article.

Package contents (assorted in 2 seperate storage case):
2 flutes 3.175mm shank flat nose spiral bits x 10
4 flutes 3.175mm shank spiral bits x 10

10. CBTOEN 20 PCS Carbide Burr Set 1/8 Inch Shank Double Cut Tungsten Carbide Rotary Burrs Die Grinder Bits for Carving, Polishing, Engraving and Drilling

Feature

20 pcs solid carbide rotary burr set, 1/8 inch(3mm) shank, fits Dremel and most small rotary tools.
With tungsten carbide material, sharp and sturdy, processing all kinds of metal and non-metal.
Rotary tool bits widely used for metalwork, tool making, model engineering, wood carving, jewelry making, welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting.
Suitable for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable.
Generally can be used with handheld electric or pneumatic tool drive (can also be used in machine tool)

Description

CBTONE 20pcs Carbide Bur Set, 1/8" Shank, Double Cut, Tungsten Carbide Rotary Files Burrs for Woodworking, Engraving, Drilling, Carving

Solid carbide burs are designed for cleaning out material in a wide-range of products including wood, plastics, stainless steel and other metals. Solid carbide burs have a long tool life and faster cutting speeds than other substrates. They are double-cut style and have rows of cutting teeth in two intersecting directions for fast material removal and a rougher finish. Carbide burs setcome in many shapes and sizes. Shapes include ball, cone, pointed, taper, tree and cylindrical.

Specifications:
Item: Carbide Bur Set
Type: Double Cut
Tool Material: Solid Tungsten Carbide
Shank Diameter (In.): 1/8 inch
Cutting head diameter: 1/8 inch
Total length: 1-1/2 inch
Number of Pieces: 20

Conclusion

By our suggestions above, we hope that you can found the best carving bits 1/8 for you. Please don't forget to share your experience by comment in this post. Thank you!