List of the Top 10 suction mount you can buy in 2020

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 suction mount. Its followed by an in-depth review of each suction mount. Hopefully, once you are done reading this article, you will be well informed about suction mount and be able to select the right suction mount for you without any hesitations.

Best suction mount

Related posts:

Best suction mount reviews

1. Delkin DDMNT-TRIPLE Fat Gecko Three-Arm Suction Mount (Black)

Feature

Triple suction guarantees stability.
Eliminates vibration for professional still & video recording.
Rated for DSLRs & camcorders up to 8lbs.

Description

If you're shooting with a heavier DSLR and lens combination or just aiming to get the most stability for video shoots, our Fat Gecko Tripod Mount is just the ticket. Three industrial locking suction cups adjust to the contour of your shooting surface, then tighten and lock into place to create our most stable mount yet. With six adjustable points, it's easy to set up a customized angle that gets you a unique (and otherwise unattainable) shot for every shooting situation. The standard 1/4-20-Inch tripod head creates a reliable connection with your camera and includes a rubber washer with a tightening knob to dampen vibration even further in wind or from moving shooting surfaces. The 3-Arm Mount couples a Fat Gecko Original with a Fat Gecko Mini and creates a 3-point mount for increased stability on moving objects or in harsh conditions. A slide & lock design creates secure attachment between the two mounts and sturdy contact with any smooth, non-porous surface.

2. Sportway S30 Dash Cam Suction Mount (2nd Gen) with 10pcs Joints for REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,GoPro Hero and Most Other Dash Cameras DVR GPS

Feature

Normal price $10.99,Limited Promotional price $8.99,Only ONE dayS30 with 5pcs different joints, suitable for most popular brand dash cam, such as Z-Edge/ YI /OldShark/Falcon Zero/KDLINKS/G1W, G1W-B, G1W-C, G1W-CB.../HP /Transcend/ TaoTronics......
The mount uses POM and ABS plastics ,tolerable temperature range is :-40120;the suction cup uses PVC material, tolerable temperature range is :-2070,and bearing weight up to 5kgs(11 lb)
Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.
360 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass

Description

Model No.:S30
Material: POM+ABS+PVC+Screw
Size:5.5*H7.5cm
Mount Net weight: 55g
Package weight: 125g
Bearing weight: 5 kgs(11 Ib)
Tolerable Temperature Range:-2070
Accessories:
5pcs Different Joints
1pcs Warranty Card

Widely Applicable models: (Including but not limited to)
YI 2.7" Smart Dash Cam, Z-edge Z3, Z1, KDLINKS X1, Falcon Zero F170, OldShark 3"

G1W, G1W-B, G1W-C, G1W-CB, G1W-H...LS300W, LS400W, LW360W, LW430W..
Transcend, AUKEY, TaoTronics 2.7",HP F310, Ausdom, DOD Tech...

Lecmal 2.5", Btopllc 2.5", NEXGAGET 3.0", Aketek 2.5", KDLINKS DX2, Hisili 3"
Amebay 2.4", RAGU 2.7", Btopllc A848, AUBBC A1 2.3", ZeroEdge 2.4", VENAS... ect...

iSportgo is a good brand in outdoor sport product accessories and Car accessories field.
If any problem or you need help, Kindly contact with us , we will solve it for you at once and accept replacement or refund .

3. Dash Camera Suction Mount Cup Holder Vehicle Video Recorder Windshield & DashBoard for yi Dash Car DVR Camera GPS

Feature

Fits Most Popular Car Dash Cam Such Like G1W/Yi Smart Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP...
Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera
Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
Adjustable neck with 360 degrees rotating holder, much better and easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass
package included: 2* Suction Mount(Please note ,the cameras above the photos are not included,only one piece of bracket included.)

Description

PERFECTLY FIT YI DASHBOARD CAMERA, TWO STEPS INSTALL, MOUNT STRONGLY TO THE WINDSCREEN, THE YI SMART DASH CAMS WOULD NEVER FALL OFF NO MATTER IT IS HOT COLD OR IN STRONG JOUNCE, THIS SUCTION CUP MOUNT IS A GOOD REPLACEMENT OF THE 3M TAPE MOUNT.



FIT FOR THE FOLLOWING DASH CAM:

YI 2.7" Screen Full HD 1080P60 165 Wide Angle Dashboard Camera, Car DVR Vehicle Dash Cam with G-Sensor, WDR, Loop Recording, Grey

YI Compact Dash Cam, 1080P Full HD Car Dashboard Camera with 2.7" LCD Screen, 130 WDR Lens, G-Sensor, Night Vision, Loop Recording - Black

YI 1080P Dash Cam Full HD 1080P/60fps 2.7" LCD Screen 165 Wide Angle In Car Dashboard Camera with Wifi, 3-Axis G-sensor, WDR, Emergency Recording(Grey)



PACKAGE INCLUDE:

2 suction cup mount

4. Garmin Mini Suction Cup Mount Speak, Plus, Dash Cam 45, 55 65W, 010-12530-05

Feature

Compatible with Speak, Speak Plus, Dash Cam 45, 55 and 65W
Access your compatible device while navigating in your vehicle with this portable mini suction cup mount
Simply suction the mount to the windshield for easy viewing

Description

Access your Compatible device while navigating in your vehicle with this portable Mini suction cup mount. Simply suction the mount to the windshield for easy viewing.

5. RAM Twist-Lock Suction Cup Base with Ball

Feature

Consists of a 3.3in. twist lock suction cup base that is connected to the RAM-B-238U diamond base with 1in. rubber ball. The suction cup is designed to have an extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.

Description

RAM 3.25in Diameter Suction Cup Twist Lock Base with 1in Ball

6. Car Phone Mount Windshield, Long Arm Clamp iVoler Universal Dashboard with Double Clip Strong Suction Cup Cell Phone Holder Compatible iPhone 11 Pro XS Max X 7 8 Plus 6 Plus Galaxy S9 S8 S7 Note 9 10

Feature

Extremely Strong Suction with switch for quick use, well adhere to your windshield or dashboard. Easy to install and no tools requires.
Adjustable clamp can hold devices up to max 3.54 inches (90mm) for width, fits most types of phone .Red rubbers on clamp can well protect your phone not damaged. You can use this phone mount if you have a pop socket on the back of your phone.You don't need to remove pop sockets and the clamp will avoid to damage it.
Long Flexible Arm/Gooseneck Shockproof Design allows for easy positioning, and bring device close to you. You can keep your eyes up instead of looking down at your phone.
Full 360 Degree Rotation with a adjustable clamp head, you can adjust your phone for good viewing.
iVoler UPDATE VERSION 6 Inches Long Arm/Neck Car Mount With Strong Suction of Three layers and X Clamp, provide you perfect viewing angle while driving your vehicle. Compatible with iPhone X 8 8 Plus 7 7 Plus 6 6Plus 5 SE , Galaxy S5 S6 S7 S8, Google, LG, Huawei and almost all for any device's diagonal screen between 3.2--6.0 inches.

Description

360 Degree Rotation Long Arm/Neck Smartphone Car Mount
This is iVoler new update version for long arm car mount, design for your windshield and dashboard, A new window car mount. Provide a good view angle while you drive.

Features:
-Fits many types of Smartphone on market, which the diagonal screen size from 3.2"-6.0".
-Adjustable clamp can hold up to 3.54 inches for width.
-Shockproof design, providing a stable viewing environment and adjustable size secure from falling
-Easy installation no need tools. Strong suction with Three layer, perfect to your car.
-Full 360 degree rotation. you can adjust best position for your driving.

* The holder works like a clip. Press the 2 ends and place your phone in the holder.
* The car mount allows you to rotate the phone in 360 degree direction and you can adjust the position of the phone.
* You can view the screen of your phone vertically or horizontally according to your desire.
It is a universal car mount and it holds wider phones too.
* It is a durable and sturdy car mount. It has decent look.
* The clamp is pretty flexible and you can adjust its position anywhere you like.

Package included:
1 * X Clamp
1 * Arm Holder
1 * Instruction

7. Scosche MAGWSM2 MagicMount Suction Mount for Mobile Mevices

Feature

Universal mount for smartphones and GPS devices
Suction-mounts onto car window, windshield or dash
Short-necked design for use with GPS devices
Cradle-free design
Heat/cold resistant
SHOP WITH CONFIDENCE: Backed by Scosche's 36 month worry-free warranty and friendly customer service

Description

Magic Mount is a new magnetic mounting system for conveniently mounting smartphones and more. Just hover your device near the magnetic surface and it instantly locks securely in place. Its sleek cradle-free design uses high-powered magnets to secure your device where you use them most. Place your device at any angle for convenient viewing. On the road, at the office, at home, everywhere. Place your device at any angle for convenient viewing. Secure the Magic Mount with the automotive-grade 3M adhesive. Install the Magic Plate behind your case or battery cover, directly to your rugged case or directly to your device. Works with: GPS, iPod, iPhone, iPad, Smartphones, Tablets. A Larger and smaller Magic Plate are included.

8. JOBY Suction Cup with GorillaPod Arm for GoPro HERO6 Black, GoPro HERO5 Black, GoPro HERO5 Session, Contour and Sony Action Cam

Feature

CAPTURE SUPERIOR PERSPECTIVES. Look at life from a different point of view with as you mount this suction cup action camera mount to any non-porous purpose. The flexible GorillaPod Arm maneuvers 360 degrees letting you get the angle you want, for the shot you need.
QUICK-TWIST LOCK. Just twist and turn a quarter turn to the right as you feel the lock click into place, right beneath your fingertips. Let your Go-Pro or other action sports camera hold on tight, with this suction cup, its not going anywhere.
MIX AND MATCH. Innovative, high tech, and easy to use. This JOBY Suction Cup with GorillaPod Arm is ultra-versatile. The modular design and removable arm and mount allows you to mix and match using the universal -20 screw design.
READY FOR ADVENTURE. We know your travels take you far and wide. The industrial strength suction locks into place while the, Go-Pro tripod quick release mount, and GorillaPod Arm keep your equipment safe and secure, no matter where life takes you.
STICK ON STRONG. Made of medical-grade ABS plastic, stainless steel, and TPE, its made for the wear and tear of everyday life, or the rigor of adventure. Move beyond the selfie as you set your tripod up on the toughest terrain getting you the best shots

Description

CRISPER PHOTOS, SMOOTHER VIDEOS. JOBY Suction Cup with GorillaPod Arm for GoPro and Action Sports Cameras delivers innovative technology for easy usage and simple set up. Take clearer, crisper photos and smoother videos with this unique and advanced design. This simple system lets you spend less time fussing with equipment, and more time enjoying lifes greatest adventures. This kit includes a suction cup, GorillaPod Arm, and GoPro Tripod Quick release mount, to give you ultimate versatility when setting up your shot. TURN YOUR WORLD UPSIDE DOWN. Find new limits with the JOBY Suction Cup with GorillaPod Arm for GoPro and action sports cameras as you explore a new perspective. This kit includes flexible arm joints so and an ultra-strong suction cup with quick-lock technology, so you can feel the secure hold engage underneath your fingertips. Secure it to any clean, non-porous surface for the ultimate hold. COMPATIBILITY OPTIONS. Made out of durable, yet lightweight ABS plastic, and TPE, the JOBY Suction Cup with GorillaPod Arm is made to last. With a universal -20 thread mount, you can easily use it with other JOBY camera accessories. Give yourself the tools you need to take better photos and smoother videos with the JOBY Suction Cup with GorillaPod Arm. Perfect for GoPro HERO6 Black, GoPro HERO5 Black, GoPro HERO5 Session, Contour and Sony Action Cam.

9. Maxboost DuraHold Series Car Phone Mount for iPhone 11 Pro Max Xs XR X 8 7 Plus SE,Galaxy S20 Ultra S10 S10+ S10e,Note 10,LG,Huawei,Pixel,Moto[Washable Sticky Gel Pad/Extendable Holder Arm (Upgrade)]

Feature

WORRY FREE DRIVING - The Durahold Series with a re-designed extendable car mount securely holds your smartphone to your dashboard or windshield providing you with a hands-free driving experience! Featuring extendable arms to accommodate smartphones of all sizes and an anti-slip pad to completely hold your device in place. (Compatible with most smartphone, including iPhone X, 8 7, Galaxy S9 S8 S7, Note 9 8, LG G6, Pixel, HTC and more.
EASY TO INSTALL - No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. (Note: It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold).
VERSATILE ANGLES - Featuring a ball swivel for 360-degree rotation, jointed arm for easy movement and an extendable neck for extended viewing. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable and perfect viewing experience.
POWERFUL SUCTION - Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.
ONE YEAR WARRANTY - Limited One Year Warranty from Maxboost ensures maximum protection for your Maxboost Extendable Arm Car Mount.

Description

Maxboost DuraHold Series Car Phone Mount with Washable Sticky Gel Pad and Extendable Arm.

EASY TO INSTALL
No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing.

WIDE COMPATIBILITIES
The Mount Head Clamp can extended up to 3.7-inch (max) width. Compatible with most smartphone including iPhone, Nexus, Pixel, Galaxy, HTC , Blackberry and more. Ensure you check your phone spec for optimal fit.

POWERFUL SUCTION
Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.

BOX CONTENT
1 x Maxboost Extendable Arm Car Mount
1 x Adhesive Mounting Square
1 x User Manual

OPTIMAL USAGE
1. Clean surface before installing the mount.
2. It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold.
3. To insert your smartphone into the mount, press and hold down the Quick Release Button. Then push the extendable arms back in.
4. IMPROTANT: Use few drops of water in the suction cup bottom for a better experience. During the summer time as the days are getting hotter, please avoid direct exposure to the sun as this may affect the functionality of your car mount or weaken the suction adhesive.
5. There are two locks on the locking mechanism. Use the first lock on smoother surfaces and the second lock on more textured surfaces.

10. Dash Cam Suction Cup Mount - for AUKEY, Crosstour, TOGUARD, APEMAN, YI 2.7", Z-Edge Z3 3" and Most Other Dash Cam. with 16 Different Points, 3 x 3M Double Sided Adhesive Tapes, 3 Wipes(Dry and Wet)

Feature

The dashcam mount fits for Byakov, YI 2.7", Rexing V1, AUKEY, APEMAN, Roav, Old Shark Dash CamAnker dash cam etc.
Easy to install and remove, no residue.
Wipe the windshield and the bottom of the suction cup with alcohol cotton. Get the most adsorption.
A 360-degree rotating ball adapter head for flexible positioning of the camera.
Come with 9 different joints, suitable for 99% dash cam.

Description

GENERAL NOTES:
Apply the 3M Double-Sided Adhesive Mount Holder Bracket, it is recommended to stick it to the windshield first. It will be stronger when you install the dash cam after 6 hours.

Applicable models:
AUKEY, Rexing v1, YI 2.7", Crosstour, APEMAN, Roav, Old Shark, E-ACE, TaoTronics, WheelWitness, JEEMAK dash cam and more... (Including but not limited to)

Conclusion

By our suggestions above, we hope that you can found the best suction mount for you. Please don't forget to share your experience by comment in this post. Thank you!