List of the Top 10 mash tun false bottom you can buy in 2020

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 mash tun false bottom. Its followed by an in-depth review of each mash tun false bottom. Hopefully, once you are done reading this article, you will be well informed about mash tun false bottom and be able to select the right mash tun false bottom for you without any hesitations.

Best mash tun false bottom

Related posts:

Best mash tun false bottom reviews

1. Stainless Steel Domed False Bottom - Select a Size (12", 10" or 9") (9")

Feature

Made with high quality 304 grade Stainless Steel
Includes 3/8" barb fitting
7/8" hole in the center
Choose the right size for your brew pot

Description

This domed false bottom fits tightly into the bottom of your brew kettle, leaving just enough room for the grain bed below. Made with high grade perforated stainless steel. Choose the appropriate size for your kettle.

2. Learn To Brew Mash Tun Igloo Ton with Stainless Steel False Bottom & Valve, 10 gallon

Feature

10 gallon mash ton
Perfect for 5 and 10 gallon batches
All metal is stainless steel
12"false bottom
Stainless steel ball valve

Description

A great way to get into all grain brewing these 10 gallon coolers work very well as mash tunes for five and ten gallon batches, as you'll notice barely any temperature loss throughout your 1hr mash. Comes with a stainless ball valve cooler kit and a 12 inch stainless steel false bottom. The barb size on the mash tune for the output is 1/2". All metal parts are stainless steel.

3. 12" Stainless Steel Bazooka Screen with 1/2" MPT Fitting

Feature

Stainless mesh tube replaces false bottom in a mash tun
Excellent for straining out leaf hops in the boil kettle
Overall length is 12 inches; 1/2" male pipe threads

Description

This stainless steel mesh screen tube can be used in the boil kettle to filter out whole hops from your valve or chiller. It can also be used in a mash tuna in place of a false bottom to effectively separate wort from the grain. Requires a 1/2" female coupler to attach to kettles.

4. Horiznext stainless steel 1/2" weldless bulkhead ball valve for Home Brewing Kettle

Feature

Made of stainless steel 304, heavy duty, durable and corrosion resistance.
High temperature silicon seals.
1/2" NPT (National Pipe Taper threads) x 1/2" inner diameter hose
Maximum working pressure20000 psi
Working Temperature: -212 to +1472 degrees

Description

Easily installs onto your weldless homebrew kettle setup.
Made of stainless steel that resist corrosion, pressure and wear

Material: stainless steel 304
Size: 1/2"
Maximum working pressure20000 psi
Working Temperature: -212 to +1472 degrees F
It works well with the Keller and Weld-B-Gone kits, or the Lochmann 1/2" stainless ball valve. Makes attaching 1/2" tubing to your equipment easy with the use of one of these barbs.

Package Included: 1 pc built by 7 parts
It works well with the Keller and Weld-B-Gone kits, or the Lochmann 1/2" stainless ball valve. Makes attaching 1/2" tubing to your equipment easy with the use of one of these barbs.

WARRANTRY: our products are usually covered by a 12-month warranty. The homebrew ball valve is excellently designed and proven reliable. If you have any question or dissatisfaction about the products, pls contact us. If you are interested in purchasing large quantity, welcome to email us to get a good price and product details.

5. HomeBrewStuff 12" Stainless Domed False Bottom and Silicone Tubing

Feature

It contains 12" round
Heavy duty 18 gauge stainless steel
3/32 holes on 5/32 centers
3/8" SS barb fitting included
7/8" hole in the center will fit any 1/2"

Description

12" domed false bottom w/ 3/8" barb. For insulated 10 gallon round beverage containers, like igloo or Rubbermaid coolers, or any container with at least a 12" opening at the top. Made from stainless steel with 3/32 perforated holes on 5/32 centers. The barb fitting is 3/8 inch. 12" round x heavy duty 18 gauge stainless steel, 3/32 holes on 5/32 centers. 3/8" SS barb fitting included. 7/8" hole in the center will fit any 1/2" threaded fitting includes 12" of 3/8" high-temp silicone tubing.

6. All Grain Brewing Complete 12" Stainless Steel False Bottom With Weldless Valve

Feature

12
Comes Complete With Hose & Weldless Valve
Made For 10 Gallon Containers Like Rubbermaid & Igloo Coolers
100% Stainless Steel Construction

Description

This is for 10 gallon round beverage containers, like Rubbermaid and Igloo coolers. This false bottom is made from stainless steel and includes the tubing and the weldless valve. This item is ready to use. This false bottom fits your all grain equipment to prevent grain from escaping. This false bottom allows outflow of liquid beneath the dome for a superior, clean transfer.

7. 5214 Mash Tun False Bottom Adapter, Stainless Steel/Clear Tubing

Feature

1/2" MPT to 3/8" barb Stainless
3/8" high temp silicone tubing
2 hose clamps

Description

This Mash Tun False Bottom Adapter Stainless version comes with everything you need to attach your domed false bottom to the back of your bulkhead or spigot. You get a stainless 1/2" MPT to 3/8" barb piece, 12 inch of 3/8" high temp silicone tubing to make the connection, and 2 stainless steel clamps to hold everything in place.

8. GasOne 30540 S Gas One Beer Filter Pot Stainless Steel False Bottom for Home Brewing Supplies (40 QT), 40QT

Feature

STAINLESS STEEL - Separate your wort from your grains during the mashing process with material made from durable stainless steel.
HANDLE - Comes with a built-in bale handle making inserting and removing your false-bottom a quick and easy task!
DURABLE LEGS - Gas One's False Bottom will sit on the bottom of your brewing pot while also resting on the side indents of your kettle to create a compact fitting.
FILTER YOUR PROCESS - Enhance your brewing experience by improving your wort flow in the grain bed for recirculation and sparging. Gas One's False Bottom keeps your hop particles and small material from clogging / damaging your other equipment
DIMENSIONS - 13.5 inch Diameter and 3 inch legs

Description

Gas Ones False Bottom for Brewing Kettles is used to stop grains and small particles from clogging your other equipment (spigot, etc..). Built with legs and a convenient bale handle to dispose of your filtered material ( also while being made of durable Stainless Steel), Gas Ones False bottom is made to be a long-lasting and effective product for new and veteran Brewers alike. Diameter : 13.5 inches Leg Height : 3 inches

9. CONCORD Stainless Steel False Bottom Set w/ Elbow Mash Tun (15.75")

Feature

Each piece in this false bottom set is made from solid 304 Stainless Steel.
Due to the universal domed shape design, it is compatible with any kettle.
Folded stainless steel edges prevents scratching base of the kettle.
Stainless Steel elbow is reinforced with additional o rings and nut underneath.
You get everything you see in the photo.

Description

Sizes: 15.75" Diameter. About 1" height. Each False Bottom will include a generous 1 ft long all natural silicon tube. IMPORTANT: UNIVERSAL FALSE BOTTOMS ARE NOT DESIGNED TO FIT FROM ONE END OF THE KETTLE TO THE OTHER. ITS DOMED SHAPE IS DESIGNED FOR IT TO FIT SMALLER THAN THE KETTLES INNER DIAMETER

10. Stainless Steel False Bottom for Homebrew Pot: 12"

Feature

Made of high quality perforated stainless steel
Converts brewpot into a mash tuna
Great for making the switch to all grain brewing
Make sure to choose the appropriate size for your kettle
Available for 10" and 12" brewpots

Description

As one of the most innovative homebrew supplies out there, this false bottom fits tightly into the bottom of your brew kettle, leaving just enough room for the grain bed. If you're looking to make the switch to all grain brewing equipment, this is the easiest way to convert your brewpot into a full-blown mash tuna Features include made of high quality perforated stainless steel, converts your brewpot into a mash tuna, great for making the switch to all grain brewing.

Conclusion

By our suggestions above, we hope that you can found the best mash tun false bottom for you. Please don't forget to share your experience by comment in this post. Thank you!