List of the Top 10 electronics project box metal you can buy in 2020

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 electronics project box metal. Its followed by an in-depth review of each electronics project box metal. Hopefully, once you are done reading this article, you will be well informed about electronics project box metal and be able to select the right electronics project box metal for you without any hesitations.

Best electronics project box metal

Related posts:

Best electronics project box metal reviews

1. Zulkit Project Box ABS Plastic IP65 Waterproof Dustproof Electrical Junction box Enclosure Black 3.94 x 2.68 x 1.97 inch (100X68X50mm) (Pack of 2)

Feature

Product Name: Junction Box, Electrical Boxes ; Waterproof Rating: IP65.
Outer Size of electrical enclosure: 3.94" x 2.68" x 1.97"(100X68X50mm)(L*W*H)
Electric Enclosure Material: ABS, Rubber
Features: moisture proof, sunscreen, anti-corrosion, durable for years use
Package Content: 2 x Junction Box, 1 x Rubber Grommet, 4 x Screws

Description

Weatherproof junction boxes, perfect for use outdoors.
junction box means these are well protected from rain and water splash back,making them perfect for joining wires inside.
The electrical junction box is easy to operate and repair, no cable cutting, more convenient.
Suitable for indoor and outdoor electrical ,communications.
Easy to install and easy to use.
100% brand new and high quality.

Package Include:
2 x Electrical Junction Box
1 x Rubber Grommet
4 x Screws

Usage: connector box is mainly suitable for indoor and outdoor electrical, communications, steel smelting, oil chemical industry, electronics, electric power, railway, construction site, mining, quarry, airport, hotel, ships, large factories,terminal equipment, sewage discharge waste water treatment,etc.

Tips to ensure the effect of the IP65 waterproof:
1)Please check and make sure rubber grommet being completely filled around the lid.(The rubber grommet has elasticity. If the rubber grommet is shorter, you can stretch it to the proper length when you are installing it on the corner parts)
2)If there is any issues,please contact our customer service,our customer service representatives are 24/7 to help!

2. BUD Industries CN-5704 Die Cast Aluminum Enclosure, 4-1/2" Length x 2-1/2" Width x 2-7/32" Height, Natural Finish

Feature

Designed to meet NEMA 1, 2, 4, 4x, 12, 13 and IP66 ratings
Self-adhesive EPDM gasket easily attaches to cover
Made from durable ADC-12 aluminum alloy
Natural finish
External measures 4-1/2" length by 2-1/2" width by 2-7/32" height; internal measures 4-3/8" length by 2-3/8" width by 2-3/32" height

Description

Designed to meet NEMA 1, 2, 4, 4x, 12, 13 and IP66 ratings. Made from durable ADC-12 aluminum alloy. Self-adhesive EPDM gasket easily attaches to cover. Molded-in mounting flanges located along the short side of the box. Cover attaches with 4 or 6 stainless steel, thread-forming screws. Most models have internal card guides for mounting PC Boards or partitioning. Easily machined and modified to your particular needs. Card Guides, Sealed. Cover include design. Natural finish. External measures 4-1/2" length by 2-1/2" width by 2-7/32" height; internal measures 4-3/8" length by 2-3/8" width by 2-3/32" height.

3. BUD Industries CU-3008-A Aluminum Electronics Minibox, 7" Length x 5" Width x 3" Height, Natural Finish

Feature

Small metal electronics enclosures
Two sections slip together and may be joined by either built in snap lock or sheet metal screws (included)
0.040" Aluminum alloy
Natural finish
Measures 7" length by 5" width by 3" height

Description

Small metal electronics enclosures. 0.040" aluminum alloy. Two sections slip together and may be joined by either built in snap lock or sheet metal screws (included). Flanged sections assure proper shielding. Units can be used as separate housings or as part of larger assemblies. Measures 7" length by 5" width by 3" height.

4. BOX3-1455N-BK Black Aluminum Box, For 3U Sized PCBs, With 11 Card Guide Slots, Box = 6.30 x 4.06 x 2.10 in

Feature

Box is anodized black silver extruded aluminum with metal end plates and polycarbonate plastic bezel.
Box Size 6.30 x 4.06 x 2.09 inches (160 x 103 x 53 mm)
11 built-in card guides for 3U sized PCBs (100 x 160mm).
Side out top panel plate.
Rugged body constructed from extruded aluminum with a minimum thickness of .06" (1.5 mm).

Description

The BOX3-1455N-BK is an extruded aluminum enclosure for electronic projects. The enclosure is designed for BusBoard Prototype Systems 3U sized prototype PCBs (100x160mm boards) which are standard Eurocard/VME size. PC boards mount horizontally by sliding into built-in card guide slots. Two aluminum end panels are provided with attractive plastic bezels to hide the seams. The screws are recessed flathead type to provide a flat surface. The silver aluminum is clear anodized for protection from the elements. The end panels and the top plate can be removed for easy drilling or cutting of holes. Screws and adhesive rubber feet are included.

5. Eightwood Aluminum Project Box Enclosure Case for one PCB Board DIY- 4.33" x 3.74" x 2.17"(LWH) Split Top with Pre-assembled Body Box

Feature

Heavy gauge extruded aluminum construction
Professional sandblast/matte anodized finish
Built-in grooves for holding circuit board
Excellent electromagnetic shielding performance
Color:Dark Grey

Description

Features:
Heavy gauge extruded aluminum construction
Professional sandblast/matte anodized finish
Built-in grooves for holding circuit board
Excellent electromagnetic shielding performance
Heat sink nature, electromagnetic field protection and robust construction.
Front and back panels and fasteners are included.
Just for one PCB board

Application:
electronic projects, power supply units, student projects, amplifiers, etc

Dimensions:
Outer:4.33" x 3.74" x 2.17" (L*W*H)
Inner:4.33" x 3.43" x 1.93" (L*W*H)

Package Included:
1x Eightwood Aluminum Box (screws included)

6. Jameco Valuepro SY0206-R Case, Metal, 6.3" L x 7.8" W x 2.5" D

Feature

Dimensions: 6.3"L x 7.8"W x 2.5"D
Metal material
Product type: enclosure

Description

This is a CMOS 8-bit successive approximation A/D converter that uses a differential potentiometric ladder-similar to the 256R products. This converter is designed to allow operation with the NSC800 and INS8080A derivative control bus with TRI-STATE output latches directly driving the data bus. This A/D appears like memorylocations or I/O ports to the microprocessor and no interfacing logic is needed.

7. Pinfox Waterproof Electronic ABS Plastic Junction Project Box Enclosure 200mm by 120mm by 75mm (Black)

Feature

Made of ABS material. Sturdy and terrific for making those DIY projects. Easy to drill and shape openings for many items like meters, sockets, LEDs and so on.
Many screw holes inside in various places. If wanted to make one to go in it, such as attaching a board, there would be no problem mounting it.
Solid construction and IP65 waterproof rating to protect against dust, corrosion and splashing water.
Inner dimension: Approx. 7.6 x 4.45 x 2.67 inches(193 x 113 x 68mm). Average wall thickness is 0.12 inches (3mm).
Ideal for electronic projects, instrument enclosure, power supply units, temperature controller box, etc.

Description

This ABS project box brings a better customizable experience. Certain modification can be done according to your requirments. Sealed waterproof feature protect your instruments even under the adverse environment. It comes with 4 screws to close the box.

Outer dimension: Approx. 7.87 x 4.72 x 2.95 inches(200 x 120 x 75mm).
Inner dimension: Approx. 7.6 x 4.45 x 2.67 inches(193 x 113 x 68mm).
Average wall thickness is 0.12 inches (3mm).
IP Rating: IP65

1 x Enclosure Box

8. uxcell Metal Blue Project Junction Box Enclosure Case 210 x 180 x 140mm/8.27 x 7.09 x 5.51inch

Feature

Country of Manufacture: CHINA; Material: Metal
Net Weight: 920g; Package Content: 1 x Junction Box
Main Color: blue; Inner Size: 190*155*122mm(7.48*6.1*4.8inch)(L*W*H)
Outer Size: 210*180*140mm(8.27*7.09*5.51inch)(L*W*H)
Radiator Size: 105*25mm /4.13*0.98inch(L*W)

Description

External Size: 210*180*140mm(8.27*7.09*5.51inch), Electronic Enclosure Junction Box.
Surface Mounted, underground electrical enclosure switch Junction box.
Excellent waterproof and dampproof performance.
Good for electronic projects, power supply units, projects, amplifiers, etc., thanks for it heat sink nature, electromagnetic field protection and robust construction.

9. BUD Industries CU-347 Aluminum Econobox, 7-3/8" Length x 4-11/16" Width x 3-13/64" Height, Natural Finish

Feature

Close fitting flanged cover fastened to bosses in the body with screws
Ideal for concealed or other interior use where a safety closure is necessary
This plus the thickness of the #ADC-12 aluminum alloy, offers excellent screening properties
Natural finish
External measures 7-3/8" length by 4-11/16" width by 3-13/64" height; internal measures 7-5/64" length by 4-21/64" width by 3-5/64" height

Description

Die cast aluminum enclosure. Close fitting flanged cover fastened to bosses in the body with screws. This plus the thick of the #ADC-12 aluminum alloy, offers excellent screening properties. These lightweight, easy to machine enclosures have a number of uses: instrument and meter cases, filter networks, junction bosses, switching and many other applications requiring a small box. In addition, they're ideal for concealed or other interior use where a safety closure is necessary. Cover include design. Natural finish. External measures 7-3/8" length by 4-11/16" width by 3-13/64" height; internal measures 7-5/64" length by 4-21/64" width by 3-5/64" height.

10. BUD Industries CU-3009-A Aluminum Electronics Minibox, 8" Length x 6" Width x 3-1/2" Height, Natural Finish

Feature

Small metal electronics enclosures
Two sections slip together and may be joined by either built in snap lock or sheet metal screws (included)
0.040" Aluminum alloy
Natural finish
Measures 8" length by 6" width by 3-1/2" height

Description

Small metal electronics enclosures. 0.040" aluminum alloy. Two sections slip together and may be joined by either built in snap lock or sheet metal screws (included). Flanged sections assure proper shielding. Units can be used as separate housings or as part of larger assemblies. Measures 8" length by 6" width by 3-1/2" height.

Conclusion

By our suggestions above, we hope that you can found the best electronics project box metal for you. Please don't forget to share your experience by comment in this post. Thank you!