It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 brushless flight controller 2s. Its followed by an in-depth review of each brushless flight controller 2s. Hopefully, once you are done reading this article, you will be well informed about brushless flight controller 2s and be able to select the right brushless flight controller 2s for you without any hesitations.
Best brushless flight controller 2s
Rank
Product Name
Score
Related posts:
Best brushless flight controller 2s reviews
1. BETAFPV Upgraded F405 V2 FC 4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless Beta85X Micro Quadcopter Cine Whoop Drone
Feature
This combo of F4 FC with BLHeli_32 16A ESC built-in BetaFlight OSD is customized for Cine whoop drone Beta85X. Please note: When you connect the receiver to this FC, don't forget to plug the battery, otherwise the receiver will have no power to work at all.BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC' s that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200.
Firmware version of F4 FC is Betaflight OMNIBUSF4SD (OBSD), built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode). Support TBS micro receiver with TX02, RX02 ports. RSSI ports is available.
This ESC support BLHeli_32 suite pass-through ready, Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200. It can fit motors with 1.5mm header pins connector like 1105,1103 motors etc, and you can use it work with 450mAh 3S battery or 450mAh 4S battery.
Please note this F4 2S-4S FC is built without receiver, all the ports are available on this board. So that you could connect any receiver you want on the board. Such as Frsky XM/XM+ Receiver, TBS receiver and DSMX receiver. Receiver Connection: https://betafpv.freshdesk.com/support/solutions/articles/27000049913-f4-2s-brushless-fc-esc
Description
BETAFPV F4 FC 2S-4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless FPV Micro Drone Cine Whoop Beta85X
SPECIFICATIONS
F4 FC
The F4 FC board is the same one on Beta75X drone - www.amazon.com/dp/B07H8XQ7R6
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
TX02RX02 ports is available, so that it could support TBS micro receiver
RSSI ports is available
Buzzer solder pads
Support programable LED like WS2812 etc
Weight: 2.7g
BLHELI_32 16A ESC
Support BLHELI_32
Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 2S-4S lipo
Cotinue current: 16A
Peak current: 35A
Firmware target: BETAFPV-16A-32bit
MCU:STM32F051
Motor Connectors: 1.25mm header pins connector
RECOMMENDED PARTS LIST
Frame: Beta85X frame
Motors: 1105 motors / 1103 motors with 1.5mm header pins connector
Battery: 450mAh 3S battery / 450mAh 4S battery
PACKAGE
1 * F4 brushless flight controller
1 * 4in1 16A ESC board
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
2. BETAFPV 2S F4 FC AIO Brushless Flight Controller SPI Frsky Receiver ESC OSD Smart Audio with JST-PH2.0 Cable for 2S Brushless FPV Whoop Drone Beta75 Pro 2 Beta65 Pro 2 Beta75X Beta65X
Feature
Betafpv AIO F4 FC is highly integrated with a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC, suitable for a lighter 2S whoop drone, like Beta65 Pro 2 or Beta75 Pro 2 etc. So the 2S drone could save much weight for a faster fly experience.The 2S F4 FC AIO Brushless Flight Controller comes with a SPI Frsky receiver, binding procedure is easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual
The power supply is 1S~2S, it comes with a 2S cable pigtail JST-PH 2.0 connector in default, customer can use 2pcs 1S 300mAh battery work on this. If you want to use it with 2S battery, please change the cable to XT30 : www.amazon.com/dp/B07FFQ2TXQ
The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be seted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
This AIO F4 2S FC also can be used on 2S brushless whoop drone Beta75X and Beta65X, performance very well even no wash-out issue then, so you can just take this AIO FC to replace the stock FC&ESC.
Description
BETAFPV 2S F4 FC AIO Brushless Flight Controller SPI Frsky Receiver ESC OSD Smart Audio with JST-PH2.0 Cable for 2S Brushless FPV Whoop Drone Beta75 Pro 2 Beta65 Pro 2 Beta75X Beta65X
Bind procedure:
a. Power on the board by connecting the battery or USB power. Then the green receiver LED start to flash.
b. Click the bind button for 3s. Then the green receiver LED will be solid on.
More details checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual
Specification:
Item: F4 2S AIO Brushless Flight Controller (Frsky RX+OSD+ESC)
FC
CPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 26mm x 26mm, fully compatible with the all whoop drone mounting pattern, recommend the Beta65X frame and Beta75 Pro frame.
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Built in SPI Frsky D16 protocol native receiver, compatible with almost ALL Frsky FCC radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module. Not compatible with Frsky LBT protocol.
Power Cable: 55mm, with 2pcs JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 4.5g
ESC
Built-in ESC with 5A continuous and peak 6A current
Power supply: 1-2S
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Package
1 * F4 2S brushless flight controller
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
3. BETAFPV Lite 2S Brushless Flight Controller Silverware Firmware SPI Frsky Receiver 5A ESC with XT30 Cable for 2S Brushless FPV Racing Whoop Tiny Whoop
Feature
2S FC with SilverwareBETAFPV Lite 2S brushless flight controller is the first lite 2S FC with Silverware firmware on BETAFPV, CPU has been updated to STM32F042G6U6, can totally supports 2S brushless motorsBuilt-in Current MeterThis Lite 2S FC has a built-in current sensor, you could get a more accurate current value from the OSD information instead of the virtual current meter when flying
Update of LiteOSDBuilt-in LiteOSD, which uses UART, improves the reflash rate of the OSD, OSD data is more stable without lighting, solving drift issue of whoop undering Angle mode. It allows you to select viewing options, such as voltage of battery, flight time, flight mode and setting menu. Includes OSD menu, supports PID tuning, motor rotation changing and channel mapping of AETR/TAER switching via OSD menu
New DesignAdded the download port of FC, which is convenient for downloading the program without soldering other cable. SmartAudio is supported. It is able to solder the Wire-Connected version A01 AIO camera and M01 AIO Camera
Receiver SupportedBuilt-in Frsky D8 native receiver, supports SBUS and DSMX protocol, including Frsky xm / xm+ receiver, Futaba receiver, Crossfire receiver in SUBS mode and DSMX receiver. If there is anything problem with your BETAFPV item, please contact us before returning or refund. We will help you solve it at the first time. [email protected]
Description
BETAFPV Lite 2S Brushless Flight Controller SPI Frsky Receiver 5A ESC with Silverware Firmware OSD Smart Audio with XT30 Cable for 2S Brushless FPV Racing Whoop Tiny WhoopSPECIFICATION OF FC
CPU: STM32F042G6U6
Six-Axis: MPU 6050
Size26mm*26mm
Firmware: Silverware
OSD: LiteOSD
Built-in Receiver: Frsky D8
Support Receiver: SBUS protocol and DSMX protocol
Smart Audio is supported
Weight: 5.69g with XT30 cable
SPECIFICATION OF ESC
Input Voltage: 2S
Continuous Current: 5A
Peak Current: 6A
Factory Firmware: S_H_50_REV16_7.HEX
Signal Support: D-shot15, D-shot300, Oneshot125, Multishot, PWM
Motor Connectors: 1.25mm header pins connector
Support BLHeliSuite programmable
RECOMMEND PARTS: Battery:
300mAh 2S lipo - www.amazon.com/dp/B07R7856RX
350mAh 2S lipo - www.amazon.com/dp/B07JG3ZFC5
Camera:
A01 AIO Camera - www.amazon.com/dp/B07X6MDBXM
M01 AIO Camera -- www.amazon.com/dp/B07X96YBJT
Motor:
0802 17500KV -- www.amazon.com/dp/B07GYR31T8
0802 12000KV -- www.amazon.com/dp/B07MN8P96M
PACKAGE:
1 * BETAFPV 2S Lite brushless flight controller
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Eachine black E010 frame / 75mm / 85mm frames)
4 * Anti-vibration rubber dampers
4. HGLRC F428 Flytower Integrated F4 Flgiht Control AIO Betaflight OSD BEC FC + 28A ESC Blhel_S BB2 2-4S 4 in 1 Brushless ESC For RC Drone
Feature
Micro F4 Flight Control Board ( D-Shot Version) MPU: MPU6000-SPICPU: STM32F405RGT6, dual 8K, Black Box: Flash 16M
Input Voltage: 2-4S Lipo , Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A, Size: 25x25mm board, 20mm mounting holes (M2), Weight:2.3g
Support Subs/PPM/DSMX receiver , 25A 2-4S Blheli_S BB2 4 in 1 ESC:, Input Voltage: 2-4S Lipo battery
Description
Micro F4 Flight Control Board ( D-Shot Version)
MPU: MPU6000-SPI
CPU: STM32F405RGT6, dual 8K, Black Box: Flash 16M
Input Voltage: 2-4S Lipo , Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A
Size: 25x25mm board, 20mm mounting holes (M2)
Weight:2.3g
Support Subs/PPM/DSMX receiver , 25A 2-4S Blheli_S BB2 4 in 1 ESC
Input Voltage: 2-4S Lipo battery
5. ARRIS X90 90MM Micro Brushless Drone FPV RC Racing Drone Quadcopter RTF w/FPV Camera + 2S Battery + 4in1 Flight Controller + Radiolink T8FB
Feature
It comes with Radiolink T8FB and R8FM mini receiver, fully adjusted and tuned before leaving the factory, it is ready to fly.This micro video camera drone has true "X" structure, super durable and strong.
This mini drone uses the latest 4in1 ESC, which has BLHelis-S firmware, supports oneshot, multishot and Dshot.
The micro video drone uses of 2S 7.4V 700mah 30C Lipo Battery is another progress in FPV field.
This micro brushless tiny whoop drone has 88mm wheelbase, suitable for both indoor and outdoor flying.
Description
ARRIS X90 90MM fpv racing quad is one "X" symmetrical design, and comes with Radiolink T8FB and R8FM mini receiver, fully adjusted and tuned before leaving the factory, it is ready to fly. It is durable and strong with all-round protection, smooth and powerful, suitable for indoor and outdoor flying.
Main Features:
1. Super Durable
2. Super Strong--Propeller Guard potect the motor and propeller, Canopy protect the whole frame with the fc,esc,camera,vtx and antenna;battery holder protect the battery.
3. 4in1 12A comes with BLHelis-S firmware,which supports oneshot, multishot and Dshot
4. High efficiency 1104 7800KV brushless motor, Longer working life
5. 88MM Mini size, suitable for indoor and outdoor flying
Specifications:
Wheelbase: 88mm
Input Voltage: 2S Lipo
Flight Controller:SP-racing F3 with OSD
ESC: 4IN1 12A BLHeli-S ESC
Motor: ARRIS 1104 7800KV Brushless Motor
Propeller: Gemfan 2035BN 4-Blade Propeller
Battery: 2S 7.4V 700mah 30C Lipo Battery
Flying Time: 3-6 min.
Dimension: 121mm x 121mm x 63mm
Weight: 79g (Without battery)
Radio: Radiolink T8FB remote controller
Receiver: R8FM receiver
Package Included:
ARRIS X90 Frame x 1
Propeller Guard x 1
Canopy x 1
ARRIS 1104 7800KV Brushless Motor x 4
Gemfan 2035BN 4-Blade High Efficiency Propeller x 4 (2CW+2CCW)
Flycolor Raptor S-Tower 12A ESC with F3 and OSD x 1
Camera with VTX and Antenna x 1
7.4V 700mah Lipo Battery x 1
Radiolink T8FB with R8FM receiver x 1
Other equipment required (not included):
Battery: Suggest ARRIS 4S (B01I37E3BS)
Battery Charger: Suggest Skyrc Imax B6AC V2 (B01MZ1ZZ7Z)
Goggle: Suggest Aomway Commander V1 (B0779Q3T6L)
6. Betaflight F3 Micro 6A 2S 4-in-1 Brushless ESC OSD Flight Controller Micro Cube
Feature
Tiny and light flight controller and ESC system for micro drones.Compatible with Betaflight, iNav, Cleanflight and More
Supports Betaflight OSD integrated into the flight controller
Comes with manual for quick installation, setup and configuration.
Description
Note - DSM and SBUS receiver input, please configuire RX3 as input interface.
Note - DSM receiver power from 3.3V.
Note - SBUS and PPM receiver power from 5V.
Flight Controller Specifications:
Dimensions: 20*20mm
Mounting Dimensions: 16*16mm
Weight: 1.9g
Processor: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 ( connected by SPI)
Firmware version: betaflight_3.1.0_OMNIBUS
Built-in BEC: 5V/0.5A
Receiver: PPM, Spektrum 1024/2048, SBUS, IBUS, XBUS, SumD SumH RX etc.
Power supply: 2S lipo battery ( 6.5V-8.4V)
Suitable for 60mm-80mm mini brushless FPV Quadcopter frame
ESC Features:
Support programmable LED Sprit (turn off transponder before using)
Support BLheli/BLHELI_S suite Pass-through ready
Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Default Dshot600
Built-in voltage detection, alarm
Built-in Betaflight-OSD
Buzzer solder pin
LED_STRIP connector
ESC Specifications:
Item name: 4 In 1 6A BLHeli_S ESC
Size: 25x29mm (includes solder pad)
Mounting holes: 16x16mm, 2mm
Weight: 3g
Input voltage: 2S lipo
Con. Current: 6A
Peak Current: 10A (5S)
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
BEC: NO
Driver: 3 in 1 MOS
Supports Dshot Oneshot multishot
Package Contents:
1* Super_S F3 flight control board
1* Super_S BS06D 6A 4in1 ESC
8*M2*5+5 Nylon column
8*M2 Nuts
8*M2 Screw
Manual
7. HGLRC F4 V6 Pro FC Flight Controller with Switchable VTX 5V BEC OSD PDB 30.530.5mm M3 for 2S- 6S RC Multicopter FPV Racing Drone (SMA Female Connector)
Feature
High integration HGLRC F4 V6 Pro AIO flight control is upgrade of F4 V5 , all-in-one board that brings you BF OSD , a switchable VTX (0 / 25 / 100 / 200 / 400 / 600mW) and F4 FC + PDB -- all in a single boardEasy to programming support Buzzer / programming LED / voltage monitoring / BLHELI-S ESC programming Strong component: with Black box FLASH 16M large capacity storage. support 2S- 6S Input voltage and maximum current 200A. with hole mounting size M3 hole30.5 x 30.5mm , light weight 15.6g
High-end quality Built-in Betaflight OSD to adjust PID , Support SBUS/PPM/DSMX receiver , high quality durable suit for most of RC drones quadcopters ,Supports the input voltage of up to 6S LiPo battery.Comes with heat resistance damping ball to upgrade the stability and operation
Higher frequency F4 V6 Pro FC has a more powerful STM32F405RGT6 MCU operating at a higher frequency , making everything run smoothly . You can add GPS and anything else you like freely because the CPU utilization is lower
Top ServiceIf there are any question or need help , just feel free contact us , we will always here help you out within 24 hours
Description
HGLRC brings you a true all-in-one board that brings you BF OSD, a switchable VTX (0 / 25 / 100 / 200 / 400 / 600mW), and F4 FC + PDB -- all in a single board! All you need to add are ESCs and you are halfway to building your quad! (joking)
This board is great for those using low profile stacks or builds without much headroom. If you put your ESCs on your arms, this could easily be the only thing in your stack.
Features- Built-in BETAFLIGHT OSD to achieve remote control PID parameters.
- Buzzer / programming LED / voltage monitoring / BLHELI-S ESC programming.
- Support SBUS / PPM / DSMX and other mainstream receivers.
- Black box FLASH 16M large capacity storage.
- Brand name: HGLRC
- Item name: F4 V6 PRO 48CH 0/25/100/200/400/600mW VTX
- Chip: STM32F405RGT6, dual open 8K, MPU6000-SPI connection
- Built-in 5V/3A BEC output
- Direct welding ESC PDB
- Built-in current sensor
- FPV transmitter: 0/25/100/200/400/600mW 48CH switchable transmitter (BFOSD control)
- Input voltage: 2-6S
- Board thickness: 1.6MM
- Copper foil thickness: 2OZ * 8
- Maximum current: 200A
- Hole mounting size: M3 30.5 * 30.5mm
- Weight: 15.6g
- SMA Adapter - Female
* User Manual
Includes- 1 x HGLRC F4 V6 PRO Flight Controller
- 1 x SMA to MMCX Antenna
- 1x 35v 1000uf Capacitor
- 1x Buzzer
- 1x Hardware Kit
- 2x 6pin silicone cable
8. AKDSteel Happymodel SE0805 10000kv 1.5mm 1-2S Brushless Motor Support Crazybee Beecore_BL Flight Controller for 75-85mm Whoop FPV Drone 2 red 2 Black CCW+CW KSX3448+KSX34492 10000kv
Feature
Dual bearing design and more balance.High efficiency and smooth.
Better for Toothpick building.
Compatible with 75mm85mm propellers.
Description
Description:
Product category:motor
Mode: 0805
KV options: KV10000
Configuration ration: 9N12P
Stator Diamter: 8 mm
Stator Length: 5mm
Shaft Diameter: 1. 5 mm
Engine Dimensions (Dia. * Len): 10. 5mm * 17mm
Weight (g): 3.3g
Number of Cells (Lipo): 1-2 S
40mm-66mm propellers compatible
Could use for 1s-2s 75mm-85mm whoops
Package Included: 1*motor
Note:
1-2cm signal might exist due to manual measurements (note: 1cm=0.39inch), please kindly understand. The colors of might differ due to different monitor settings.
9. 4pcs 0802 Motor 12000KV Brushless Motors for FPV Racing Tiny Whoop 2S Brushless Whoop Drone Beta75Pro 2 Beta65 Pro 2
Feature
08028 12000KV brushless motor is designed for 2S brushless whoop drone like Beta75 Pro 2 BNF and Beta65X.08028 12000KV brushless motor is campatible with 2S lipo battery.
The 08028 brushless motor is Micro JST-1.25 3-pins Connector plug, only weighs 2g/pcs, and the shaft is 1.0mm.
These brushless motor is an alternative option of 0802 motors, you can get more power on throttle and better flight experience.
If you order this 08028 12000KV brushless motor, highly recommend F4 2S AIO Brushless Flight Controller and Beta75 Pro 2 frame and Beta65X frame.
Description
Specifications
Width: 10mm/0.4in
Weight: 2.0g/pcs (with connector)
Shaft: 1.0mm/0.04in
Cable Length: 30mm/1.18in
Connector PlugMicro JST-1.25 3-pins connector
KV (rpm/V): 12000KV
Battery: 1S & 2S lipo battery
Voltage: 3.7-7.4V
Package:
4 * 08028 12000KV Brushless Motor (2CW + 2CCW)
Some M1.6x4 screws (Fit for Beta75 Pro 2 etc)
10. BETAFPV F4 V3 2-4S AIO Brushless Flight Controller No RX BLHELI_S 12A ESC OSD Smart Audio with XT30 Cable for Beta85X Beta75X Beta75 Pro 2 Brushless Whoop Drone
Feature
Built-in Current MeterThis F4 2-4S AIO FC V3 version has a built-in current sensor, you could get a more accurate current value without the virtual current meterCautions when using 4s batteryThis F4 AIO FC can really support 4S battery. But please don't use motors with too high KV value or poor quality. No 0x0x/1102/1103 series motors could stand 4S power for the moment in the market
Integrated FC with light weight Only weighs 5.6g integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC which can support 4S battery for fast flying experience
Supported ReceiverThe F4 2-4S AIO FC Brushless Flight Controller builted without receiver, please note it only Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Also support Frsky R9M Receiver and DSMX receiver since V1.2. Compatible receivers signal include PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Battery & Motor comboHighly recommend the 1103 11000KV / 0802 12000KV / 08028 12000KV Motor for setting 2s kit. 1103 8000KV / 1105 6000KV Motor will be the best choice for 3S kit. If you try it on 4S kit, we suggest you to use the 1105 5000KV Motor
Description
Specifications of FCCPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU6000 (SPI connection)
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/TBS Crossfire Receiver/Frsky R9M Receiver/DSMX receiver
Support programmable LED like WS2812 etc
Weight: 5.6g
Specifications of ESC
Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-4S Lipo
Continue current: 12A
Peak current: 13A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Motor Connectors: 1.25mm header pins connector
Factory firmware: G-H-30-16.7
Recommended Motors:
2S: 1103 11000KV Motor-www.amazon.com/dp/B07FN64599
3S1103 8000KV / 1105 6000KV Motor-www.amazon.com/dp/B07MZ2BSDT
4S1105 5000KV Motor
Could the ESC on this AIO board support really 4S battery?
Yes. But please pay more attention to the motors. Here are two situations that the motor will burn itself and then the ESC frequently.
Situation 1:
The motor's KV value is too high and could not stand the 4S power. For example, the BETAFPV 1105 6000KV motors could not stand the 4S power in aggressive flying. So we are working on a lower KV 1105 motor that could use with 4S battery. It will be released soon.
Situation 2:
A poor quality motor will result in the fire accident in 4S power. No 0x0x/1102/1103 motors could stand 4S power for the moment in the market. Please make sure your motors could support the 4S battery before any try.
PACKAGE:
1 * F4 2-4S brushless flight controller with XT30 Plug
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration rubber dampers
