List of the Top 10 arduino xbee kit you can buy in 2020

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 arduino xbee kit. Its followed by an in-depth review of each arduino xbee kit. Hopefully, once you are done reading this article, you will be well informed about arduino xbee kit and be able to select the right arduino xbee kit for you without any hesitations.

Best arduino xbee kit

Related posts:

Best arduino xbee kit reviews

1. LilyPad Arduino Bluetooth Kit -XBEE Board with HC-05 Bluetooth XBEE Module- Add a Bluetooth Connection to your LilyPad Project

Feature

Add Bluetooth connectivity to your project
This board acts as an easy to use connector to add connectivity to Arduino, LilyPad or Raspberry Pi Projects
Using this board with an Arduino, your processor can be hidden with the BlueTooth device where connectivity is best
Convenient connection pads can use conductive thread or soldered wires

Description

This kit brings everything you need to add Bluetooth connectivity to your LilyPad Project. The LilyPad XBee is a breakout board for the popular XBee modules that can be incorporated into your LilyPad (or any 5 or 3.3 volt) project to provide connectivity. This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.
Attach the included HC-05 XBEE Bluetooth module to the LilyPad XBEE board, configure and you are ready to go! Once sewn or soldered into your project just attach your favorite XBee to the pre-soldered headers and you are good to go!

2. SunFounder Project 1602 LCD Starter Kit For Arduino UNO R3 Mega2560 Mega328 Nano (without Controller) - Including 43 Page Instructions Book

Feature

Premium SunFounder kit contains some common components and an LCD1602 module that displays numbers and characters, for you to learn Arduino and LCD.
With detailed user manual containing 12 projects, code, Fritzing images, datasheets, and so on.
The user manual [PDF] can be downloaded from Technical Specification in the Product Information.
With a well-designed case for storing the components after finishing the experiment.
The UNO R3 is NOT included.

Description

With this kit, we will walk you through the know-how of using the SunFounder board in a hands-on way. Starting with the basics of electronics, you'll learn through building several creative projects. Including many common but useful electronic components as well as an LCD1602 module, this kit will help you "control" the physical world in a "visible" way.
Code, Fritzing files and datasheets are free to view and download under the LEARN section on SunFounder website.

12 Projects for Beginners
Lesson 1 Button
Lesson 2 LED Flowing Lights
Lesson 3 Buzzer
Lesson 4 Photoresistor
Lesson 5 RGB LED
Lesson 6 Relay
Lesson 7 Tilt-Switch
Lesson 8 Servo Motor
Lesson 9 LCD1602
Lesson 10 Thermistor
Lesson 11 Voltmeter
Lesson 12 Automatic Light Source Tracking

Package included:
1 x Project Box
1 x Booklet
1 x LCD1602 Module
1 x USB Cable
1 x Breadboard
65 x Jumper Wire
8 x Resistor - 220R
4 x Resistor - 1 kR
4 x Resistor - 10 kR
4 x Resistor - 100 kR
1 x Resistor - 1 MR
1 x Resistor - 5.1 MR
2 x NPN Transistor (S8050)
1 x FET Transistor (2N7000)
2 x Diode Rectifier (1N4007)
1 x Diode (Zener)
1 x Tilt Switch
1 x Photoresistor (Photocell)
1 x Thermistor
2 x Button
1 x Potentiometer (with knob)
1 x Servo Motor
1 x RGB LED
2 x green LED
8 x red LED
v2 x yellow LED
1 x Active Buzzer
1 x Relay

3. XBee Arduino UNO R3 compatible microcontroller - FRIBEE white

Feature

XBee-Shield built in Arduino UNO R3 compatible microcontroller
You can choice an antenna type such as bluetooth, WiFi, XBee, and Zigbee
Without s/w debugging, data displayed on the PC monitor can be transmitted wirelessly
ATmega328P microcontroller board

Description

XBEE Arduino UNO R3 !

Arduino UNO R3 compatible microcontroller with built-in Xbee shield. It is based on the Atmega328P.
Data displayed on the PC monitor can be transmitted wirelessly without software debugging.
That function is provided as DIP switch conversions. You can choice an Xbee type pinout antenna for wireless communication.

FRIBEE white is a microcontroller board based on the ATmega328P, manufactured by South Korea. It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a power jack, an ICSP header, and a reset button.
Also, it has a built-in XBee Shield and DIP switch for the choice of the serial communication. (detail image on the package box)

BUY TODAY!

4. WINGONEER 16pcs/lot Sensor Module Board Kit for Arduino Raspberry Pi 3/2 Model B

Feature

Those sensors will often being used in the beginner's project.It is included Sound and Obstacle avoidance sensor,Obstacle avoidance sensor,temperature and humidity sensor,ultrasonic,A path tracing module and infrared human body induction sensor. The Arduino control board is not included.
This is a good Starter Leaning Kit for Raspberry Pi and it is a good value of money than our other Raspberry Pi Kits, this kit contains 16 kinds of different electronic components.
With this kit ,we will take you from knowing to utilizing ,you are able to do more experiment , get your more idea into real action without the restriction of hardware and software.
This is a Ultimate Starter Leaning Kit including bulk of components, electronic modules(without the Rasp Pi) that are common-used during Raspberry Pi experiment.

Description

WINGONEER trademark Reg.NO:4747611

Package includes:
1x DHT11 temperature Humiture Sensor
1x HC-SR501 IR Pyroelectric Infrared PIR Motion Sensor Detector Module
1x DS1302 Clock Module
1x Rain sensor / module rain weather module
1x Sound sensor module
1x HC-SR04 ultrasonic sensor
1x Fire detection of flame sensor module
1x Ky-008 Laser Transmitter Module
1x Photoelectric sensor module
1x Soil humidity sensor
1x Black and white line identification for obstacle avoidance sensor
1x Vibration sensor module
1x MQ-2 gas sensor module
1x 315M super regeneration of 315M wireless transceiver module
1x Tilt sensor module
1x TCRT5000 infrared/optical tracking sensor

5. SainSmart Xbee Shield Module for Arduino UNO MEGA Nano DUE Duemilanove

Feature

Ranges 2-3 times beyond the standard ZigBee modules
Easy to install with the Arduino
Works with simple AT command
Low power consumption

Description

The SainSmart XBee board for Arduino mates directly with the Arduino USB board and allows to wireless communicate over a modified ZigBee protocol using the popular XBee module from Maxstream. This shield (an Expansion Board without XBee module) is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission. As the innovative design, XBee-PRO can be in the range 2-3 times beyond the standard ZigBee modules. XBee-PRO modules work in the ISM 2.4 GHz frequency band. The MaxStream"s XBee (1 mW) Zigbee module is pin-compatible.You can use a simple AT command to advanced configuration. An OEM developer is now XBee code development package. It is self-developed in collaboration with the MaxStream ZigBee/802.15.4 RF module code. Features : Shield for the platform. Shield does not include an XBee module. Any XBee module will work with the shield. Board mates directly with the Arduino USB board and allows to wireless communicate over a modified ZigBee protocol using the popular XBee module from Maxstream. Compatibility : Xbee 1mw. Xbee Pro. Xbee 2.5 series. Package Content : 1 x Xbee Shield.

6. WINGONEER New Style Infrared IR Wireless Remote Control Sensor Module Kits for Arduino

Feature

100% brand new and high quality
For Arduino suite by ultrathin Mini infrared wireless remote control infrared remote control and 38 KHZ infrared receiving module,
the Mini ultra-thin has 20 function keys, the infrared emission furthest distance up to 8 meters,
very suitable for indoor control devices of all kinds.
Infrared remote control receiving module can receive standard 38 KHZ modulation signals, by means of programming the Arduino,

Description

WINGONEER trademark Reg.NO:4747611

Description:
100% brand new and high quality

For Arduino suite by ultrathin Mini infrared wireless remote control infrared remote control and 38 KHZ infrared receiving module,

the Mini ultra-thin has 20 function keys, the infrared emission furthest distance up to 8 meters,

very suitable for indoor control devices of all kinds.

Infrared remote control receiving module can receive standard 38 KHZ modulation signals, by means of programming the Arduino,

the remote control signal decoding operation can be realized,

which can produce all kinds of remote control robots and interactive work.

Battery:CR2025 Button batteries (not Included)

Transmission Distance: up to 8m (depending on the surrounding environment, sensitivity of receiver etc)

Effective Angle: 60

Static Current: 3~5uA, Dynamic Current: 3~5mA

PIN 1 LEFT PIN = GROUND

PIN 2 MIDDLE PIN = 5V

PIN 3 RIGHT PIN = SIGNAL OUT TO ARDUINO PIN 11

Color: As the picture show

Material: Plastic

Size: 85*40*5mm

Package Includes:
1x WINGONEER Infrared IR Wireless Remote Control
1x WINGONEER Cable
1x WINGONEER Module

7. Kuman 180 pieces M3 Nylon Male Female Hex Utility Spacer Standoff Screw Nut Assortment Mounting Hardware Kit For FPV,Quadcopter Drone, RC, Arduino,Raspberry PI 3 Circuit Board With a Cross Screwdriver

Feature

Material:The nylon is dielectric, sturdy and light
Convenient:Come with a 3.0MM Length 12.5CM Cross Screwdriver and Storaged into plastic case, easy to carry
Various:8 specifications(6mm,8mm,10mm,12mm,15mm,20mm standoffs,Phillip head screws,Hex nuts)
Safety:RoHS compliant and meet requirements of flammability standard
Application:Motion sensor mounting, Arduino raspberry pi 3 2 1 model B A A+ B+ rpi zero microcontroller board building,etc

Description

Descriptions

Technical Parameters
Material: Durable hard black nylon
Operating temperature: -20C - 120 C

Package List
M3 x 6mm + 6mm 10pcs
M3 x 8mm + 6mm 10pcs
M3 x 10mm + 6mm 10pcs
M3 x 12mm + 6mm 10pcs
M3 x 15mm + 6mm 10pcs
M3 x 20mm + 6mm 10pcs
Phillip head screws (M3 x 6mm) 60pcs
Hex nuts (M3) 60pcs
3.0MM Length 12.5CM Cross Screwdriver 1pcs
Things You Might Need To Know Before Purchasing:
The M3 is a metric screw specifying a nominal diameter of 3 millimetres (0.12 in). The M3 is the second most common screw found in PCs. It commonly appears in many lengths from 1-20mm.

8. Dorhea 5Pcs Ultrasonic Sensor Module Kit HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino UNO Mega R3 Mega2560 Duemilanove Nano Rapsberry Pi 3 Robot XBee ZigBee

Feature

Quality -- Power Supply : 5V DC ; Quiescent Current : <2mA ; Effectual Angle: <15 degree ; Detection Distance : 2cm~450 cm ; Resolution : 0.3 cm.
Operating Principle -- Ultrasonic hc-sr04 distance measuring transducer sensor, it consists of ultrasonic transmitter, receiver, and control circuit.
HC-SR04 ultrasonic sensor module -- Using IO trigger for at least 10us high level signal, when triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object, the duration of the signal is the time from sending ultrasonic to returning.
Test Distance Formula -- The distance between the unit and the object is calculated by measuring the traveling time of sound and output it as the width of a TTL pulse,hc-sr04 test distance following formula -- L = 1/2 T C ( L is the distance, T is the time between the emission and reception, and C is the sonic speed )
Package Include -- 5 X HC-SR04 Ultrasonic Sensors , 10 X Female-Male Dupont Cables , 10 X Female-Female Dupont Cables

Description

Feature :
HC-SR04 Ultrasonic Sensor
Power Supply :5V DC
Quiescent Current : <2mA
Effectual Angle: <15
Ranging Distance : 2cm - 500 cm
Resolution : 0.3 cm
Output Signal: Electric frequency signal, high level 5V, low level 0V
Mode of Connection: VCC/ trig(T)/ Echo(R)/ GND
(VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.)

The all process is:
Pull the Trig pin to high level for more than 10us impulse , the module start ranging.
Finish range, if you find an object in front , Echo pin will be high level, and based on the different distance, it will take the different duration of high level.
So we can calculated the distance easily.
The test distance = (Duration of high level * speed of sound (340M/S))/2.

Product Package:
5 X HC-SR04 Ultrasonic Sensors
10 X Female-Male Dupont Cables
10 X Female-Female Dupont Cables
3 X HC-SR04 Mounting Bracket

Note:
The module should be inserted in the circuit before been powered to avoid producing high level of misoperation; if producted, power it again.
The module is not suggested to connect directly to electric, if connected electric, the GND terminal should be connected the module first, otherwise,it will affect the normal work of the module.
When tested objects, the range of area is not less than 0.5 square meters and the plane requests as smooth as possible, otherwise ,it will affect the results of measuring.

9. LilyPad Arduino 3 Piece Bluetooth Starter Kit XBEE Board - HC-05 Bluetooth XBEE Module - XBEE Interface Adapter. Add a Bluetooth Connection to your LilyPad Project

Feature

Includes everything you need to add Bluetooth connectivity to your project - Shield, XBEE Bluetooth and XBEE Bluetooth programming adapter
Acts as an easy to use connector to add connectivity to Arduino, LilyPad or Raspberry Pi Projects
Using this board with an Arduino, your processor can be hidden with the BlueTooth device where connectivity is best
Convenient connection pads can use conductive thread or soldered wires

Description

This kit brings everything you need to add Bluetooth connectivity to your LilyPad Project. The LilyPad XBee is a breakout board for the popular XBee modules that can be incorporated into your LilyPad (or any 5 or 3.3 volt) project to provide connectivity. This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.
Attach the included HC-05 XBEE Bluetooth module to the LilyPad XBEE board, configure and you are ready to go! Once sewn or soldered into your project just attach your favorite XBee to the pre-soldered headers and you are good to go!

10. OSOYOO Bluetooth 4.0 HM-10 Master Slave Module For Xbee Arduino UNO R3 Mega 2560 Nano

Feature

The most complete, most convenient, and most stable Bluetooth data transmission, remote control, and data acquisition module
Master-slave in one, transparent transmission, replacing serial port
Remote control, transparent transmission, MCU is unnecessary
Remote data acquisition, transparent transmission, MCU is unnecessary
Pls download the instructions: http://osoyoo.com/2016/10/27/bluetooth-4-0-hm-10-master-slave-module/

Description

Note: We have full tech support to assist you with sample projects. For more Sample Code and DIY Project Tutorial, Please go to the web: http://osoyoo.com/2016/10/27/bluetooth-4-0-hm-10-master-slave-module/.

Product Overview
HM-10 series Bluetooth module use TI CC2540 chip, configure 256KB space,
support the AT command.
Users can change the role (master, slave mode) and the serial port baud rate, equipment name, matching password and other parameters on-demand.
It is very flexible to use.

Product Parameters
Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: not more than 4dBm
Sensitivity: -84dBm at 0.1% BER
Transmission Rate: Asynchronous: 6 kbps
Synchronous: 6 kbps
Security Feature: Authentication and encryption
Support Service: Central & Peripheral UUID FFE0, FFE1
Power Supply: +5VDC 50mA
Operating Temperature: -5 ~ +65 Centigrade
Physical Dimension: 27mm x 13mm x 2.2 mm.

Application
Industrial remote control, remote sensing
POS system, and Bluetooth keyboard, mouse, and joystick
Automobile testing equipment
Portable, battery-powered medical equipment
Automation data acquisition
Bluetooth remote control toys
Wireless LED display system
Bluetooth printer
Smart Home and Industrial Control

Package including:
1x HM-10 Bluetooth Module

Conclusion

By our suggestions above, we hope that you can found the best arduino xbee kit for you. Please don't forget to share your experience by comment in this post. Thank you!