heat-shrink tubing white buyer’s guide

All in all, we spent hundreds of hours combing through thousands of user reviews to put together a comprehensive list of the best heat-shrink tubing white on the market. We then delved into these heat-shrink tubing white further and put together detailed reviews so that you can easily pick the best heat-shrink tubing white for your needs.

Best heat-shrink tubing white

Related posts:

Best heat-shrink tubing white reviews

1. 560PCS Heat Shrink Tubing 2:1, Eventronic Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit with Box(5 colors/12 Sizes)

Feature

Material:Made of Polyolefin, Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)
Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc
Comes with 560pcs heat shrink tube assorted in plastic box, 5 colors( Yellow, Blue, Black, Green, Red), 12 Specifications , satisfied for your different need
Length: 45mm, Internal Diameter:1mm/1.5mm/2mm/2.5mm/3mm/3.5mm/4mm/5mm/6mm/7mm/10mm/13mmShrinking ratio: 2:1
Package Included: 1 x 560PCS(12 sizes) 2:1 Heat Shrink Tubing

Description

***For best results, please use a hot air gun until it reduces in size.


PACKAGE:

(Quantity x Internal Diameter x Single Length)
90pcs x 1.0mm x 45mm Black
70pcs x 1.5mm x 45mm Red
80pcs x 2.0mm x 45mm Yellow
70pcs x 2.5mm x 45mm Green
50pcs x 3.0mm x 45mm Black
45pcs x 3.5mm x 45mm Blue
45pcs x 4.0mm x 45mm Red
20pcs x 5.0mm x 45mm Blue
20pcs x 6.0mm x 45mm Blue
25pcs x 7.0mm x 45mm Red
25pcs x 10.0mm x 45mm Black
20pcs x 13.0mm x 45mm Black


NOTE:

Minimum Shrinkage Temp: +70
Full Shrinkage Temp: +110 maximum
Operating Temperature: -55 to + 125
Tensile strength:10.4Mpa
Dielectric strength: 15 kV / mm
Flammability: Flame Retardant
Cutting method: Scissors or sharp knife

2. uxcell Heat Shrink Tube 2:1 Electrical Insulation Tube Wire Cable Tubing Sleeving Wrap White 12mm Diameter 5m Length

Feature

Diameter(Before Shrinking): 12mm / 0.47"; Flat Width: 19mm / 0.75"; Length(approx.): 5M / 16.4ft; Shrink Ratio: 2:1.
Operating Temperature: -55 to 125 Degree Celsius; Flammability: VW-1, Flame Retardant.
Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
Our Heat Shrink Tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be protective in harsh environments.
Fast and Easy Use, can be customized at home to fit your need, solve your problems within few minutes.

Description

This heat shrink tube is best for wire connection, solder joint protection, connectors sealing, group lines marking, resistance electric capacity insulation protection etc.

Features:
- Corrosion Resistance
- Good Electrical Insulation
- High-strength Toughness
- High Temperature Resistant
- Waterproof Resistant
- Long Service Life

How To Use:
1. CHOOSE THE RIGHT SIZE TUBE. Measure the diameter of wire/cable you want to wrap, make sure the diameter is equal to the size of heat shrink tube after shrinked, because the tube will shrink up to 1/2 of original diameter after heating.
2. WRAP THE WIRE WITH THE TUBE. Cut out the length you need, wrap the wire with the tube, use a lighter, hair dryer or heat gun to heat the tube.
3. HEAT THE TUBE UNTIL THE WIRE IS WRAPPED TIGHTLY.

NOTES:
-PLEASE BE CAREFUL WHILE USING LIGHTER OR HEAT GUN.
-PLEASE STAY AWAY FROM WHILE HEATING.

Specifications:

Material: Polyethylene
Shrinkage Ratio: 2:1 ( will maximum shrink to 1/2 of its supplied diameter )
Minimum Shrinkage Temp: +70 Degree Celsius
Full Shrinkage Temp: +125 Degree Celsius maximum
Operating Temperature:-55 to 125 Degree Celsius
Rated voltage: 1000V
Dielectric strength: 1 KV
Flammability: VW-1, Flame Retardant
Item Shape: Round/Flat

3. Heat Shrink Tubings for Wire Repair and Electrical Splices Assorted in Tool Box (150PCS/Black and White/8 Sizes)

Feature

Handy assortment of pre-cut heat shrink tubings: 150 pcs, 8 sizes, black and white color, and includes handy tool box for easy storage.

Save many cords, including Apple charger, home or automotive wiring. Seal splice from moisture.

Certified by UL: excellent flame retardant and insulation performance, keep flexible after shrinking.

Shrink ratio: 2:1,will maximum shrink to 1 / 2 of its supplied diameter, and provide a tight fit.

Easy, quick and secure installation: use a hair dryer, heat gun or lighter to heat it.

Description

Material: Irradiation cross-linked polyolefin

Minimum Shrinkage Temp: +70C

Full Shrinkage Temp: +110C maximum

Item Shape and Marking: Round/Flat, diameter is printed on tube

Package Contents:

Quantity x Supplied internal diameter x Single length x Color

- 40pcsx 1/12"x 1 1/5"(White)

- 40pcs x 1/10"x 2 2/5" (Black)

- 20pcs x 1/7"x 2 2/5" (White)

- 15pcs x 1/5"x 2 2/5" (Black)

- 11pcs x 1/4"x 2 2/5" (White)

- 8pcs x 5/16"x 4" (White)

- 8pcs x 2/5"x 4" (Black)

- 8pcs x 1/2"x 4" (Black)

How to use

1. Select the proper size.

2. Insert the wires to the heat shrink tubing.

3. Use the heat gun or lighter or hair dryer to shrink the tube.

4. Don't touch the tube until it is cool completely.

Note: Keep about 1/2 inch distance when using the lighter to shrink the tube, or it may leave a black mark on the tube.

Keep it moving when you apply the heat, and it will shrink and wrap quite nicely.

4. Pointool Heat Shrink Tubing Kit-Wire Shrink Wrap Tubing Wire Heat Shrink Tube Kit Insulation Electrical Colored Assorted Heat Shrink Tubing Assortment Electronics for Wires(Shrink Ratio2:1,650Pcs)

Feature

MULTIPLE SIZES AND COLORS-Contain any size you may need for anything from professional repair to DIY work at home, so the shrink tube is very convenient when working with different size wires. You may not use these wire shrink wraps a lot, but when you do, there's always a size that comes in handy. This heat shrink tubing kit affords wide variety of sizes and colors, especially the smaller size which hardest to find.
SHRINK QUICKLY, DURABLE and EVENLY-This shrink tube is well made of high quality material, thick and durable. Cover the area with them and shrinking them with a heat gun, then the wire shrink wraps will wrap the wire tight and evenly within 10 seconds. With this heat shrink tubing kit you will become more confident in your soldering work.
EASY TO USE-You can just shink the shrink tube with a lighter or hair dryer when you don't have a heat gun on hand. Of course, if you'd like to use the heat shrink tubing kit more professional, standard heat gun will be much better lol. The wire shrink wraps are all pre-cut into the most common sizes you'll need which makes your work a lot faster.
KEEP ORGANIZED-The heat shrink tubing comes in a nice compact case and the semi-modular container keeps each size separately. You can throw the heat shrink tubing kit in your toolbox and not have to worry about sizes getting mixed together. There is a color, size and position reference map inside the lid, which better to recognize which size it is. It is easy to know the remaining quantity of the wire shrink wraps through the transparent box and store the large quantity shrink tubes.
WARRANTY-Pointool is committed to providing excellent quality products and worry-free shopping experiences for DIY enthusiasts. All of our heat shrink tubing kits are backed by a three-year warranty and lifetime free technical support. So come on, let shrink tubes make your amateur DIY more professional!

Description

ALMOST ALL THE SIZES YOU NEED, YOU CAN GET FROM IT.

Have you ever been troubled that you can't find the right size of heat shrink tubing?

Do you sometimes need to connect two wires together and the wire can't be soldered down to the PCB or the soldered pad?

Have you ever been crazy about your messy shrink tubes box?

If so, you need this heat shrink tubing kit.

Reason for choosing Pointool heat shrink tubing kit:

Multiple sizes and colors-There is always a size that can come in handy when you need to do some wire repair.

Shrink quickly, durable and evenly-Neat and clean way to create a tight bond with connecting wires

Easy to use-Lots of creative ways to use the wire shrink wrap.

Organized-You can throw the heat shrink tubing kit in your toolbox and not have to worry about size getting mixed together.

Scope of application:

LED light wire repair, radio control planes and drones repair, RC toys repair, car repair,tool repair, bent the paper-clips,DIY, etc..

The 6mm size was perfect for repairing and reinforcing delicate iPhone charging cables.

Specifications:

Part number: PO-6500

Shrink ratio: 2:1

Pre-cut length: 45mm/ 1 3/4inches approx

Minimum Shrinkage Temp: +70C

Full Shrinkage Temp: +125C maximum

Operating Temperature: -55C ~ + 125C

Package include:

1mm150Pcs Brown

1. 5mm100Pcs Blue

2mm90Pcs Green

2. 5mm80Pcs Black

3mm60Pcs Orange

4mm40Pcs Transparent

5mm25Pcs White

6mm20Pcs Yellow

6mm20Pcs Purple

8mm25Pcs Gray

10mm20Pcs Black

13mm20Pcs Red

Storage box 1Pcs

Tip: Hold it underneath a few inches away when use a lighter.

PUT IT INTO YOUR TOOLBOX, MAKE YOUR AMATEUR DIY MORE PROFESSIONAL.

5. 320 pcs 3:1 Shrink Tubing,Heat Shrink Tubing Adhesive (7 Size 3 Color ) Shrink Wrap for Wires Wire Protector Auto and Car Stereo Installs

Feature

Top Quality & Stronger Retraction Ratio & ECO-Friendly : Made of high quality polyolefin, 3:1 stronger retraction ratio makes it more suitable for electrical isolation or insulation of the open wires or the connected one.Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free
afe & Easy Used: Our heat shrink tubes has the advantages of good electrical insulation, good tightness and corrosion resistance, high temperature resistance. Cover the bare wire part with these tubes, heat it with soldering iron, heat gun or even hair dryer , the tube will shrink protect the wires and give you a professional look of the repair job! Note: Make sure temperature of your heat gun is up to 212(Fahrenheit), then glue inside will soften and seal the connection.
Applied Length & Inner Diameter: Dual Wall Adhesive Heat Shrink Tubing designed with the same length 45mm and multiple inner diameter and 7 Size: 2.4mm(85pcs), 3.2mm(50pcs), 4.8mm(60pcs), 6.4mm(55pcs), 7.9mm(45pcs), 9.5mm(10pcs),12.7mm(15pcs),the kit would fit snugly over 4 awg - 28 awg bare wire
What you get: 7size,3 colorsBlack,White,Red 3:1 retraction ratio heat shrink tubes,total 320pcs. Comes with storage box, Our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience.
Multiple sizes high-quality heat shrink tubing for your choos is very suitable for any project workshopthey can be used for solder joint protection, group of lines marking, resistance electric capacity reason protectioncar audio installsolar and ATV setups.fixing the broken wires, electrical insulation, wire connection etc. You can also use it for allthe iphone and ipad charging cable and headset great for boat trailer wiring or for anyone who lives in a swamp

Description

Advantages:

High Quality and Good electrical insulation & Waterproof: 3:1 Ratio; 320 pieces; Thin adhesive inside liner.Heat activated adhesive lining provides impermeable seal to salt water and other liquids.

High temperature resistance ,High Strength Toughness and Corrosion resistance &Long service life:3:1 Ratio; Up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable.

How to use it?
1. At First choose the right size tubes, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter, please measure diameter of wire which is equal to the size of tube after shrinked.
2. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly.
3. Don't touch the tube until it becomes cool.

Specification:
- Material: Made of high quality polyolefin
- Heat shrink ratio: 3:1
- Operating Temperature:-55C to + 125C
- Minimum Shrinkage Temp: 70C
- Full Shrinkage Temp: 110C maximum
- Tensile strength: 10.4Mpa
- Dielectric strength: 15 kV / mm
- Flammability: Flame Retardant

*7 Size and 3 Colors:
2.4mm/3.2mm/4.8mm/6.4mm/7.9mm/9.5mm/12.7mm;
3 Color: Black.White. Red
PACKAGE:
85pcs x 2.4mm (Black-45,Red-40)
50pcs x 3.2mm (Black-25,Red-25)
60pcs x 4.8mm (Black-30,Red-30)
55pcs x 6.4mm (Black-20, White-35)
45pcs x 7.9mm (Black-20, White-25)
10pcs x 9.5mm (Black-5,Red-5)
15pcs x 12.7mm (Black-8,Red-7)

6. SummitLink 304 Pcs White Black Assorted Heat Shrink Tube 10 Sizes Tubing Wrap Sleeve Set Combo

Feature

304 Pcs White Black Assorted Heat Shrink Tube 10 Sizes Tubing Wrap Sleeve Set Combo
Sizes: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm,20mm,30mm
Covers all gauges of wires you'll need in RC hobbies and many other applications.

Description

Item Description

2 Color in total: White Black
Sizes: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm,20mm,30mm
Quantity: 304pcs
Material: Polyolefin
Supplied internal diameter: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm,20mm,30mm
Fully shrunk internal diameter: 0.5mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 7mm, 10mm, 15mm
Shrinkage Ratio: 2:1 (will maximum shrink to 1 / 2 of its supplied diameter)
Minimum Shrinkage Temp: +70C
Full Shrinkage Temp: +110C maximum
Operating Temperature: -55C to + 125C
Tensile strength: 10.4 Mpa
Dielectric strength: 15 kV / mm
Flammability: Flame Retardant
Supplied format (round or flat): Product is supplied flat
Cutting method: Scissors or sharp knife
Manufacture specification: ISO9001
Approvals: UL Approved

Package includes:

(Quantity x Supplied internal diameter x Single length)
90pcs x 1.0 x 60mm (White x 45pcs , Black x 45pcs)
64pcs x 2.0 x 60mm (White x 32pcs , Black x 32pcs)
40pcs x 3.0 x 60mm (White x 20pcs , Black x 20pcs)
30pcs x 4.0 x 60mm (White x 15pcs , Black x 15pcs)
24pcs x 6.0 x 60mm (White x 12pcs , Black x 12pcs)
20pcs x 8.0 x 60mm (White x 10pcs , Black x 10pcs)
16pcs x 10.0 x 60mm (White x 8pcs , Black x 8pcs)
10pcs x 14.0 x 60mm (White x 5pcs , Black x 5pcs)
6pcs x 20.0 x 60mm (White x 3pcs , Black x 3pcs)
4pcs x 30.0 x 60mm (White x 2pcs , Black x 2pcs)

Total 304pcs

7. Eventronic 300Pcs Heat Shrink Tubing Kit 3:1, Dual Wall Adhesive Heat Shrink Tubes, for Charging Cable Headphone Cable Data Cable Wire Repair (Black, White)

Feature

Top Quality & Stronger Retraction Ratio: Made of high quality polyolefin, 3:1 stronger retraction ratio makes it more suitable for electrical isolation or insulation of the open wires or the connected one.
Comprehensive Applicability: Eventronic Heat Shrink Tubing Kit is very suitable for any project workshop, fixing the broken wires, electrical insulation, wire connection etc. You can also use it for allthe iphone and ipad charging cable & headset.
Applied Length & Inner Diameter: Eventronic heat shrink tube designed with the same length 45mm and multiple inner diameter and 7 Size: 2.4mm(65pcs), 3.2mm(80pcs), 4.8mm(50pcs), 6.4mm(50pcs), 7.9mm(35pcs), 9.5mm(10pcs),12.7mm(10pcs).
Safe & Easy Used: Eventronic heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, high temperature resistance. Cover the bare wire part with these tubes, heat it with soldering iron, heat gun or even hair dryer (hot enough), the tube will shrink protect the wires and give you a professional look of the repair job!
What you get: 7size,2 colors 3:1 retraction ratio heat shrink tubes,total 300pcs. 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience.

Description

Advantages:

*High Quality & Waterproof: 3:1 Ratio; 300 pieces; Thin adhesive inside liner.Heat activated adhesive lining provides impermeable seal to salt water and other liquids.

* High Strength Toughness & Corrosion resistance:3:1 Ratio; Up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable.

*7 Size & 2 Colors:
2.4mm/3.2mm/4.8mm/6.4mm/7.9mm/9.5mm/12.7mm;
2 Color: Black&White.

PACKAGE:
65pcs x 2.4mm (Black)
80pcs x 3.2mm (Black)
50pcs x 4.8mm (Black)
50pcs x 6.4mm (Black x 20, White x 30)
35pcs x 7.9mm (Black x17, White x 18)
10pcs x 9.5mm (Black)
10pcs x 12.7mm (Black)

USE NOTE:
Operating Temperature Range
1. Operating temperature: -55C~135 DEG.C
2. Minimum shrink temperature: 70 DEG.C
3. Minimum fully recovery temperature: 120 DEG.C
Approvals
SAE AMS-DTL-23053/5
UL224 125 DEG C 600V VW-1

8. Ginsco 324 Pcs 6 Size 1.5/2.5/3/5/6/10mm Clear Heat Shrink Tubing Cable Wrap Kit White

Feature

Has a 2:1 shrink ratio and is both UL & CSA certified for up to 600V @125 Degree Centigrad
Sizes: 80pcs 1.5x45mm; 80pcs 2.5x45mm; 60pcs 3.0x45mm; 40pcs5.0x45mm; 32pcs 6.0x45mm; 32pcs 10.0x45mm
Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and repairs etc.
All packed in a plastic case for easy access and carry

Description

Item specifics:
Color: Clear
Quantity:324Pcs

PACKAGE:
(Quantity x Internal Diameter x Single Length)
80pcs 1.5mm x4 5mm approx.
80pcs 2.5mm x 45cm approx.
60pcs 3.0mm x 45mm approx.
40pcs 5.0mm x 45mm approx.
32pcs 6.0mm x 45mm approx.
32pcs 10.0mm x 45mm approx.

Package Included:
1x 324Pcs(6 sizes) 2:1 Heat Shrink Tubing
1x Storage box

9. 2 Pack 1 inch Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

Feature

Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212(Fahrenheit), then glue inside will soften and seal the connection.
Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins. Round diameter: 1'', Length: 1.22M(4Ft).
Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY.
Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a hair dryer or heat gun heating it.
What You Get - 4 ft long Black 1"(DIA) 3:1 Dual Wall Heat Shrink Tubing and 4 ft long Red 1"(DIA) 3:1 Dual Wall Heat Shrink Tubing, Our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience.

Description

MILAPEAK 2 Pack 1 inch 3:1 Adhesive-Lined Heat Shrink Tubing, Black & Red 4 Feet
- Best for appliance/auto electric wire cable harness wrapping, solder joint protection etc.

- High Quality
- Waterproof
- Long service life
- High Strength Toughness
- Corrosion resistance
- Good electrical insulation
- High temperature resistance

How to use it?
1. Please measure diameter of wire which is equal to the size of tube after shrinked, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter,
2. Wrap the cable wire with the tube, then use a heat gun heating it until the wire was wrapped tightly.
3. Don't touch the tube until it becomes cool.

Note:
Make sure temperature of your heat gun is up to 212(Fahrenheit), then glue inside will soften and seal the connection.

Specification:
- Color: Black and Red
- Diameter: 1 inch
- Length: 4 feet
- Material: Polyolefin
- Heat shrink ratio: 3:1
- Operating Temperature:-55C to + 125C
- Minimum Shrinkage Temp: 70C
- Full Shrinkage Temp: 110C maximum
- Tensile strength: 10.4Mpa
- Dielectric strength: 15 kV / mm
- Flammability: Flame Retardant

Warranty
- 1 Year Free Warranty
- 30 Days return

Package Contents
- 4 ft 1" Black Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing
- 4 ft 1" Red Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing

10. Electriduct 1/2" Heat Shrink Tubing 3:1 Ratio - 25FT (White)

Feature

1/2" Diameter | 25 Feet | Color: White
3 to 1 Shrink Ratio - Shrinks to a third of its size
RoHS Compliant | UL Listed | Halogen-Free | 600V
Heat Shrink is measured round before shrinking, not flat | Heat gun required
Attention: Due to the nature of the manufacturing process, same colors may not exactly match between sizes, models and batches, and may not be identical to what displayed

Description

This 3 to 1 shrink ratio heat shrink tubing can be used to for sealing, termination, insulation, strain relief and cable identification. Available in different sizes and colors to match most applications.

Conclusion

By our suggestions above, we hope that you can found the best heat-shrink tubing white for you. Please don't forget to share your experience by comment in this post. Thank you!