When it comes to choosing your road nt1a microphone, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best road nt1a microphone. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best road nt1a microphone.
Best road nt1a microphone
Related posts:
Best road nt1a microphone reviews
1. Rode Wireless Go - Compact Wireless Microphone System, Transmitter and Receiver
Feature
COMBO: Clip-on microphone or beltpack transmitter for lavalier/headset mic / Built-in omnidirectional condenser mic for broadcast-quality soundAUDIO: Delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation
POWER: TX and RX have built-in USB-C rechargeable batteries / Up to 7 hours on a full charge, including a battery saver mode
PORTABLE: Super-lightweight and ultra-compact
ADVANCED: The transmitter and receiver pair in just 3 seconds / 3-stage output pad: 0, -6dB and -12dB / Use up to 8 systems in one location
Description
Wireless GOis an ultra-compact digital wireless microphone system unique in its clip'n'go versatility and incredibly compact form-factor. It's perfect for content creators in all disciplines.
The Transmitter (TX)
Measuring in at an ultra-compact 44mm x 45.3mm x 18.5mm and weighing just 31g, the Wireless GO transmitter (TX) acts as either a quick and easy clip-on wireless microphone, thanks to a high-quality built-in omnidirectional condenser capsule, or asthe world's smallest beltpack transmitter for a lavalier microphonevia the 3.5mm TRS input. The Wireless GO's quick clip-on capabilities make it perfect for run-and-gun journalists and vloggers in the field.
The Receiver (RX)
The RX is just as compact, measuring only 44mm x 46.4mm x 18.5mm and weighing only 31g, which makes your rig that much easier to carry and facilitates mounting on a range of camera gimbals and stabilisers. Its dual-purpose mount sits snug in your camera's shoe mount, or clips easily onto your camera strap or an item of clothing. The supplied 3.5mm TRS output cable plugs into your camera's audio input or, with the relevant available RDE adaptors, into your recorder, GoPro, iPhone etc. There is also a three-stage output pad - 0dB, -6dB, -12dB - to tailor your output to your camera or recorder.
Features
- Series III 2.4GHz digital wireless transmission with 128-bit encryption designed to deliver crystal clear audio under any conditions
- Up to 70m range (line-of-sight), but optimized for shorter-range operation in congested radio-frequency environments
- TX and RX have built-in rechargeable batteries, charged via USB-C
- Up to 7 hours on a full charge, including a battery-saver mode
- The transmitter and receiver pair in just 3 seconds
- 3-stage output pad: 0, -6dB and -12dB
- Use up to 8 systems in one location
2. Rode NT-USB Versatile Studio-Quality USB Cardioid Condenser Microphone
Feature
High quality studio microphone with the convenience of USB connectivityUltra-low noise. Compatible with Apple iPad
On-mic mix control
Includes Tripod stand, pop shield and ring mount
Description
The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over. It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RDE Rec, Garage Band, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit. The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input. A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimize plosives (hard 'B', 'T' or 'P' sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8" thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use.3. Rode NT1-A Anniversary Vocal Cardioid Condenser Microphone Package
Feature
Large 1 inch capsule with gold plated diaphragmCardioid polar pattern
Self Noise of only 5 dB (A)
Ultra low noise, transformerless surface mount circuitry
Wide dynamic range
Description
The RODE NT1A raises the bar for value-priced mics! The NT1A Anniversary Model is a complete redesign of the now legendary NT1 classic studio microphone. From the new nickel plated body to the state of the art surface mount electronic circuitry, the NT1A will leave you asking 'how can RODE offer a microphone that sounds this good, for so little money'? The RDE NT1A, Winner of the Electronic Musician 2004 Editor's Choice Award and the world's quietest studio condenser microphone. This redesigned version of RDE's classic NT1 has only 5 dBA of self-noise.4. Rode NT1-A Complete Vocal Recording Solution with Acoustic Reflection Filter and Tripod Mic Stand Kit
Feature
Cardioid Polar Pattern1" Diaphragm
48V Phantom Power
Filter Reduces Ambient Sound and Reflections
Tripod Stand measures 46" to 76" Height with Reflection Filter
Description
Overview
The NT1-A is a large-diaphragm microphone intended for general instrument and vocal recording. The mic features a 1" diaphragm with a gold-plated membrane. The NT1-A is powered via 48V phantom power and has a standard XLR connector. The accessory package includes a shock mount with an integrated pop filter, a 20' cable, and a dust cover. The RF-5P-B Reflection Filter is designed to improve the quality of voice recordings captured by absorbing and isolating the microphone from unwanted ambient reflections. The RFMS-580 Reflection Filter Tripod Mic Stand features heavy duty steel construction and is capable of providing sturdy support to your reflection filter and studio microphone at the same time from 46" to 76".
Technical Data
Rode NT1-A Complete Vocal Recording Solution
Externally Polarized 1" Condenser : TransducerCardioid: Polar Pattern
Power Requirements: 48V Phantom Power
Output Connectors: Standard 3-Pin XLR
Package Contents
Rode NT1-A Complete Vocal Recording Solution
Shock Mount with Pop FilterPremium Cable
Instructional DVD
Dust Cover
10-Year Limited Warranty
Auray RF-5P-B Reflection Filter
Dimensions: 15.8 12.6 10.2" (400 320 260 mm)Weight: 9.5 lb (4.3 kg)
Auray RFMS-580 Tripod Mic Stand
Thread Size 5/8"Height 46 to 76" (117 to 193 cm); with reflection filter
Limited 1-Year Warranty
5. Rode NT1-A Studio Rec, Podcast Condenser Mic Pack w/Isolation Shield & XLR Cable
Feature
This bundle includes: 1 x Rode NT1-A Studio Package Cardioid Condenser Microphone Podcast Record 1 x AxcessAbles XLR-XLR20 Audio Cable - XLR Male to XLR Female 1 x AxcessAbles SF-101KIT Recording Studio Microphone Isolation Shield StandThe 1" diaphragm provides a wide frequency response and excellent signal-to-noise ratio
The cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambiance, monitors, and off-axis instruments
The transformerless output electronics result in quiet, noise-free output while maintaining maximum signal gain
The mic uses standard 48V phantom power, which is supplied through the standard XLR connector
6. RODE NT1-A Studio USB Interface Kit - Scarlett 2i2 + VoxGuard + Tripod Mic Stand
Feature
The NT1-A 1" diaphragm provides a wide frequency response and excellent signal-to-noise ratioThe cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambiance, monitors, and off-axis instruments
The NTL-A transformerless output electronics result in quiet, noise-free output while maintaining maximum signal gain
The Scarlett 2i2 has excellent digital performance with 24-bit resolution at sample rates of up to 96KHz
The high-impact ABS outer shell makes the VoxGuard lightweight and easy to use. The included adapter lets you attach it to a variety of mic stands without fear of tipping
Description
The RODE NT1-A is a large-diaphragm side-address condenser microphone intended for general instrument and vocal recording. The mic features a 1" diaphragm with a gold-plated membrane, which provides a wide frequency response and exceptional signal-to-noise ratio.
Specifications:
Transducer: Externally Polarized 1" Condenser
Polar Pattern: Cardioid
Frequency Response: 20Hz - 20kHz
Dynamic Range (Typical): > 132dB (per IEC268-15)
Signal-to-Noise Ratio: > 88dB (1kHz; per IEC651, IEC268-15)
Maximum Input Sound Level: 137dB (@ 1% THD into 1 kOhms)
Power Requirements: 48V Phantom Power
Output Impedance: 100 Ohms
Output Connectors: Standard 3-Pin XLR
Pad: None
Low Frequency Roll-Off: None
Dimensions (LxDiameter): 7.6 x 2" (190 x 50mm)
Weight: 11.3 oz (320g)
The Scarlett 2i2 from Focusrite is a 2 input, 2 output portable USB recording interface featuring two Focusrite preamps, housed in an anodized aluminum unibody chassis that is solid enough to take on the road. The preamps offer transparent, low-noise and low-distortion performance with sufficient available headroom for using moving coil, condenser or ribbon microphones. Phantom power is switchable.
Specifications:
Type USB: 2.0
Converter: 24-bit, internal clock
Sample Rates: 44.1, 48, 88.2 and 96kHz
Inputs: 2 x XLR/TRS combo Microphone/Line/Instrument
Maximum Input Level: Microphone: -3dBu
Instrument: -3dBu
Line: +20dBu
Gain Range: Microphone: +10dB to +55dB
Instrument: +10dB to +55dB
Line: +10dB to +35dB
Outputs: 2 x 1/4" TRS phone
1 x 1/4" TRS phone Headphone
The VoxGuard Nearfield Audio Absorber from Primacoustic is an ideal tool for improving the quality of vocal recordings. It attaches to your mic stand to surround your microphone, reducing unwanted sounds.
7. Rode NT1-A Cardioid Condenser Microphone Recording Package with a Tripod Base Microphone Floor Stand - Black
Feature
10 Year warranty on the Rode NT1-AIncludes a tripod base desk stand, pop shield, shock mount, premium 20' microphone cable, dust cover, and an instructional DVD with recording tips
Large 1" (25mm) capsule with gold plated diaphragm
Self noise of only 5dB (A)
Description
The RODE NT1-A large diaphragm condenser microphone has become an industry standard delivering the warmth, extended dynamic range, clarity and high SPL capability typically only featured on some of the most expensive microphones.Packaged in the 'Complete Vocal Recording Solution', the NT1-A includes everything you need to get a truly professional vocal recording and is ideal for home studio recording. A studio grade pop shield and shock mount is included, along with a premium 20' microphone cable, dust cover, and an instructional DVD with recording tips.
Features:
*Large 1" (25mm) capsule with gold plated diaphragm
*Cardioid polar pattern
*Self noise of only 5dB (A)
*Ultra low noise, transformerless surface mount circuitry
*Wide dynamic range
*Gold plated output contacts
*True condenser (externally biased)
*Internal capsule shock mounting
10 year warranty
Frequency Range: 20 Hz-20 kHz
Directional Pattern: Cardioid
On Stage MS7701B Tripod Base Floor Microphone Stand - Black
The On Stage MS7701B features a steel midpoint locking clutch, 30" removable boom. Tripod base folds flat. Black finish.
The MS7701B Euro Boom boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, this stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.
Specifications
*Boom Length: 30"
*Height Adj.: 36-64"
*Base Spread: 23"
*Gross Weight: 5.15 lbs
8. Rode NT1-A Cardioid Condenser Microphone Recording Package with Free Tripod Base Desk Stand
Description
.9. Rode NT1 Kit Condenser Microphone Cardioid with Scarlett Solo Interface (3rd) Gen, Headphones and XLR Cable
Feature
NT1 MICROPHONE: It has been developed with focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class.TRANSDUCER: The microphone transducer is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The NT1 is also an incredibly quiet microphone, measuring only 4.5dBA.
DESIGN: It is also coated in a durable, military-grade ceramic layer using advanced electrostatic application techniques developed by Rode to ensure a hard wearing finish that is resistant to scratches or marks.
SHOCK MOUNTS: Internal Shockmount isolates the HF6 Capsule on the X, Y and Z axes providing protection against vibration. SMR External Shockmount improves the overall effectiveness of the shock mount. The smaller inner Lyre acts as a tension element, to maintain each Lyre in its neutral position.
BUNDLE INCLUDES: Rode NT1 Kit Condenser Microphone Cardioid with Tascam TH-03 Closed Back Over-Ear Headphone (Black), Focusrite Scarlett Solo USB Audio Interface (2nd Gen), and Kirlin 25FT XLR Male - XLR Female Microphone Cable
Description
The revolutionary NT1 microphone is completely redesigned to give you quality audio output. It has been developed with focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class. The microphone transducer is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The NT1 is also an incredibly quiet microphone, measuring only 4.5dBA. The microphone's body is made out of aluminum and is nickel plated for resistance against corrosion. It is also coated in a durable, military-grade ceramic layer using advanced electrostatic application techniques developed by Rode to ensure a hard wearing finish that is resistant to scratches or marks.
- Internal Shockmount- Isolates the HF6 Capsule on the X, Y and Z axes providing protection against vibration.
- Electronics- The circuitry of the NT1 is assembled and tested using high precision machinery which resulted in the NT1 having only 4.5 dBA of self-noise.
- SMR External Shockmount with Dual Lyre System- Improves the overall effectiveness of the shock mount. The smaller inner Lyre acts as a tension element, to maintain each Lyre in its neutral position where it is most efficient at cancelling vibration.
Bundle Includes:
- Rode NT1 Kit Condenser Microphone Cardioid
- Tascam TH-03 Closed Back Over-Ear Headphone (Black)
- Focusrite Scarlett Solo USB Audio Interface (2nd Gen)
- Kirlin 25FT XLR Male - XLR Female Microphone Cable
10. Rode NT1KIT Condenser Microphone Cardioid
Feature
Acoustic Principle: Pressure GradientPolar Pattern: Cardio
Frequency Range: 20Hz - 20kHz
Included Accessories: SMR Shock Mount and Dust Cover
NOTE: In the user manual attached it explains that these mics require 48V DC or 24V DC phantom power, and this is typically a very small switch or button on the interface that turns the power on and off. Hence kindly refer the User Manual before use.
