Check expert advices for countersink drill bit set for metal?

There are many reasons you might choose to buy countersink drill bit set for metal but it is not easy to find the best suitable countersink drill bit set for metal for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best countersink drill bit set for metal.

Best countersink drill bit set for metal

Related posts:

Best countersink drill bit set for metal reviews

1. Countersink Drill Bit, Baban Countersink Drill Bit Set 6 Pcs 1/4'' Hex Shank HSS 5 Flute Countersink 90 Degree Center Punch Tool Sets For Wood Quick Change Bit 6mm-19mm only Sold by Moworve

Feature

Eliminates Chatter&Vibration - All have a 90 angle on the point for sharp and precise countersinking. The cutting edge is hardened and honed for sharpness. A Chatter-Free,five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting.
Mutiple Application - Ideal for wooden planks,fiberboard,particle board,plywood,plastic,alumiumn board ,pcb board and more
Premium Design - Great for Sinking 90 Degree Holes into Wood and Soft Metals Countersunk Screws and Fixings.Suitable for DIY, Home and General Building/Engineering Using. NOTE:There will be a slight color difference between the picture and the actual product. Please you can refer to the photos of other customers'review. We will promise that our products are 100% brand new.
Sweet Tips - 1/4 hex shank countersinks are fine for a quick drill. They don't slip in drill chucks. You can make deep countersinks easily by setting the countersink's depth stop to allow the countersink to drill more deeply into the worksurface. Be sure to measure the size of your plug to be sure your countersink's body will make the right-size hole. IF you have any problem about the item,please contact us first so that we can help you out.
Special Reminding - "Moworve" is the only LEGAL SELLER for all "Baban" products. 100% risk-free satisfaction guarantee. Any other counterfeit seller can not provide the same quality product and there is no warranty and service. Please be careful not to buy counterfeit products. These flute countersink drill bit set are machined from high speed steels and are available in 6 different diameter sizes. Size - 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4'')

2. Makita B-49373 75 PC Metric Drill and Screw Bit Set

Feature

Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
Includes (19) titanium nitride coated high speed steel (hss-tin) metal and wood drill bits with size range of (1 - 8mm)
Includes (4) Brad point wood drill bits with size range of (4 - 8mm)

Description

Get one convenient set of bits and sockets for drilling, driving and fastening in one convenient carrying case with the Makita 75-piece metric drill and screw bit set (B-49373). the set includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications. Fastening applications are covered with an assortment of Phillips, Pozidriv, Torx, slotted and hex insert bits. The set also includes titanium nitride coated high-speed steel (hss-tin) metal and wood drill bits, brad point wood drill bits, and masonry hammer drill bits with straight shank for use with most 3/8 and drills. The kit also includes a center punch, hex Countersink, hex Nutdrivers, and a hex magnetic bit holder.

3. IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793)

Feature

Precision ground 82 tip for countersinking most machinable metals, wood, and plastic
Made from industrial grade high speed steel for increased durability
Includes a black oxide finish for added corrosion resistance
Five-flute design reduces vibration for smoother drilling and extended life
1/4" round shank fits all handheld and stationary drills

Description

The IRWIN Metal Countersink Drill Bit Set features precision ground 82 tips for countersinking most machinable metals, wood, and plastic. Made from industrial grade high-speed steel for increased durability, each countersink has a black oxide coating to resist corrosion and a five-flute design that reduces vibration for smoother drilling and an extended life. Set includes 1/4", 3/8", 1/2", 5/8", and 3/4" countersinks, and a drawer Case

4. Neiko 10218A Countersink Drill Bit Set, M2 High Speed Steel, 1/4" Tri-Flat Shank | 1/4"-3/4", 5 Piece Set with Carrying Case

Feature

Set of five 1/4" countersink drill bits with precision-ground 82-degree tips for drilling into wood, soft metals, rubber, plastic, and more
Made of high quality M2 material construction for extended bit life and 1/4" shank fits common handheld power drill
Five-flute design reduces vibration for smoother drilling and tri-flat shank allows easy gripping
Set contains 1/4", 3/8", 1/2", 5/8", and 3/4" countersink drill bits that are very commonly used
Sturdy aluminum case with handle included for carrying and storage

Description

5pc Heavy Duty Industrial Grade NEIKO Countersink Drill BIT Tool SET Woodworking Professional Tools, Cut Quickly and Easily in Soft Metal, Wood, Rubber, Plastic and Other Machinable Materials.

5. OCGIG 4pcs Titanium Coated Countersink Chamfer Tool Deburring Tool Set Metal Wood Drill Bits Zhongbo Business

Feature

Material: HSS (4241), titanium coated
Shank type: round
Sizes: 2-5mm,5-10mm, 10-15 mm, 15-20mm
Ideal for cutting through metal, wood and plastic (hardness <25 degrees)
Used for workpiece circular aperture chamfering or cone hole

Description

Feature:
Material: HSS(4241),Titanium Coated
Color:Gold
Shank type: round handle
Used for workpiece circular aperture chamfering or cone hole, the edges on the surface of the chamfering processing
Ideal for cutting through metal, wood and plastic (hardness <25 degrees)

Size(Inclined hole chamfer size x length):
2-5mm(2-5 mm x 45 mm)
5-10mm(5-10 mm x 47 mm)
10-15mm(10-15 mm x 62 mm)
15-20mm(15mm-20 mm x 82 mm)

Package include:
4 x Countersink and Deburring Tools

6. ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4in Shank, 5 Flute - Metal, Wood, Rubber, Plastic

Feature

CUT DIFFERENT MATERIALS: Use the ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4" Inch Shank, 5 Flute to quickly and easily cut soft metal, wood, rubber, plastic, and other machinable materials; Drill a hole and then use one of the included bits to countersink a spot of the screw head
SIZES: The 5 bits come in SAE standard sizes 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch
COMPATIBLE: 1/4-inch round shank fits standard handheld and stationary power drills; 5 flutes reduce vibration for smoother drilling; Precision-ground 82-degree point angle for heavy-duty use and clean cuts every time; 1/4-inch tri-flat shank offers an easy grip
BUILT TO LAST: Constructed from M2 high-speed steel (HSS) for maximum strength and longevity
EASY STORAGE: Heavy-duty 4.6" x 1.4" x 3.1" inch (11.7cm x 3.6cm x 7.9cm) aluminum carrying case with foam tray for easy transportation, safe storage, and quick organization

Description

Cut soft metal, wood, rubber, plastic, and other machinable materials with the ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4" Inch Shank, 5 Flute. Simply drill a hole and then use one of the included bits to countersink a spot of the screw head. The bits come in SAE sizes 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, and 3/4-inch. Each bit has a 1/4-inch round shank that fits standard handheld or stationary power drills. The 5 flutes reduce vibration for smoother drilling while the precision-ground 82-degree point angle allows for heavy-duty use and clean cuts every time. An easy grip is offered with the 1/4-inch tri-flat shank, and they are constructed from M2 high-speed steel (HSS). A heavy-duty aluminum carrying case with a foam tray is included for your convenience. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

7. Countersink Drill Bit with Center Punch 8 pack

Feature

SIZE: 6mm (1/4 inch), 8mm (5/16 inch), 9mm (3/8 inch), 10mm (2/5 inch), 12mm (1/2 inch), 16mm (5/8 inch), 19mm (3/4 inch). 130mm5 inch
HIGH QUALITY: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits. The automatic center punch is made of pure brass.
GOOD WORKING: Center hole punch creating a starting point that prevents screws and drills from wandering. Countersink drill holes into wood and soft metals countersunk screws and fixings.
GREAT DESIGN: 1/4 inch hex shank drill are fine for a quick change. They don't slip in drill chucks. Delivers an automatic spring driven strike when pressed against surface
MULTIFUNCTIONAL USES: Ideal for wooden planks, plastic, soft metal, fiber board, particle board, plywood, aluminum board etc. Meanwhile compared with ordinary the drill accuracy more high.

Description

How to Use:

1.Using the automatic center punches to mark the work piece with a dimple, creating a starting point.
2. Connect the countersink drill, then start to work being the starting point. Feature:

A. Center punch can adjustable cap regulates striking force.
B. Countersinking is a two step process: pilot hole first, followed by the countersink.
It's effective, but time consuming. However, a wide variety of combination countersinks do both tasks at the same time.
NOTE:

The most important thing to keep in mind when using a countersink is to match the size correctly to the screw being used.
A too large countersink will swallow the head of a screw in what will look like a moon-sized crater;
A too small countersink won't fit the screw head, and forcibly driving the screw in can tear the wood fibers around the countersink.
If you don't drill the countersink deep enough, the screw will remain proud of the surface; go too deep and the screw will seat too shallow.

Product Specification:

Material:High Speed Steels
Package include:

1 x 6mm Drill
1 x 8mm Drill
1 x 9mm Drill
1 x 10mm Drill
1 x 12mm Drill
1 x 16mm Drill
1 x 19mm Drill
1 x Automatic Center Punch

8. Snappy Tools Quick-Change 5-Pc. Countersink Drill Bit Set. Proudly Made in the USA.

Go to amazon.com

Feature

In one step, you can drill, countersink and counter bore the perfect sized hole for #4, #6, #8, #10, or #12 screws.
Snappy Tools' Countersinks will drill the pilot hole and countersink or counter-bore for screws in one step. Countersink to drive the head of the screw flush with or slightly below the surface
Ideal for plugs or dowel buttons. The 1/4" hex shank can be used with power drills and quick-change chucks.
Experience the higher quality of Snappy Tools. Combining higher quality materials and patented technology, Snappy delivers industrial quality tools to the tradesman and do-it-yourself markets at an affordable price.

Description

Founded in 1962 in our grandfather's basement in Minneapolis, Minnesota, we are a family-owned company, currently operating in Texas. We manufacture premium drilling accessories for use in power drills, impact drivers and drill presses. The 1/4" hex power bit shaft found on most of our tools has become an industry standard, being accepted in quick change chucks and impact drivers everywhere.

9. Tonsiki 6 PCS 90 Degree 3 Flute HSS Countersink Cutter Titanium Nitride Coated Chamfer Cutter End Mill Drill Bits Cutting Tool Set

Go to amazon.com

Feature

The set of 6 3-flute 90 degrees countersink drill bits is suitable for processing metal and some non-metallic materials, such as carbon steel, steel, thin iron plate, insulation board, PVC board, aluminum, soft and hard wood, plastic and so on.
The countersink drill bits set with titanium coating are very sharp, with a high circular machining accuracy and durability.
The high-quality countersink drill bits can remove burrs well without leaving scratches.
The drill bits of standard sizes are compatible with all kinds of common drill and drilling machine, including vertical drilling machine.
Specifications: diameter of the countersink top: 20.5mm,16.5mm,12.4mm,10.4mm,8.3mm,6.3mm; diameter of the bottom:10mm,10mm,8mm,6mm,6mm,5mm; length overall: 47mm,47mm,46mm,39mm,40mm,37mm; Material-high speed steel 4241

Description

The HSS countersink drill bits with titanium coating in 6 different sizes are perfectly suitable for removing burrs of metal plate and chamfer of wood plate without leaving scratches. They also have a high circular machining accuracy and stability.

Sharp and durable:
The drill bits are sharp and durable, suitable for processing all types of steel, wood and plastic plate.

Precision chamfer:
The countersink drill bits can help to drill holes accurately.

Remove burrs perfectly:
The countersink drill bits can remove burrs well without leaving scratches.

Specifications
Shape: 3 flute
Edge: 90 degrees
Material: high speed steel 4241 (for parts with a hardness below 25hrc, such as carbon steel, thin steel plate, insulation board, PVC board, wood, etc.)

Sizes
Diameter of the countersink top: 20.5mm,16.5mm,12.4mm,10.4mm, 8.3mm,6.3mm
Diameter of the bottom:10mm,10mm,8mm,6mm,6mm,5mm
Length overall: 47mm,47mm,46mm,39mm,40mm,37mm

Package includes
6 x countersink drill bits

10. KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter

Go to amazon.com

Feature

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
Round shanks allow use with a wide variety of toolholding systems
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
82 degree angle

Description

KEO ZErO flute countersink and deburring tools are simple, all-purpose tools made of Cobalt that provide flawless countersinking and deburring. The chatter-free cutting action requires minimal power. The microsmooth CNC precision ground construction produces clean, smooth cutting without smearing on a variety of materials. The tool especially excels in countersinking or deburring holes in aluminum, plastics and other nonmetallics. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 82 degree angle.

Conclusion

By our suggestions above, we hope that you can found the best countersink drill bit set for metal for you. Please don't forget to share your experience by comment in this post. Thank you!