There are many reasons you might choose to buy arduino nano accessories but it is not easy to find the best suitable arduino nano accessories for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best arduino nano accessories.
Best arduino nano accessories
Rank
Product Name
Score
Related posts:
Best arduino nano accessories reviews
1. LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
Feature
Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on Arduino IDE.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila.
Description
Specification:
CH340G Replace FT232RL.
Operating Voltage(logic level): 5V.
8 analog inputs ports:A0 ~ A7.
14 Digital input / output ports:TX,RX,D2 ~ D13.
6 PWM ports:D3, D5, D6, D9, D10, D11.
1 pairs of TTL level serial transceiver ports RX / TX.
Support USB download and Power.
Support for external 5V ~ 12V DC power supply.
Support power supply by 9V battery.
Support ISP download.
Package including:
3 x LAFVIN Nano V3.0 with ATMEGA328P Module
3 x USB Cable
2. SunFounder RAB Holder for Arduino Raspberry Pi Breadboard Holder 5 in 1 Base Plate with Rubber Feet for Arduino R3 Mega 2560, Raspberry Pi 3B+ 3B 2 Model B 1 Model B and 400 800 Points Breadboard
Feature
WIDE-RANGE COMPATIBLITY- This holder is compatible with the Arduino Uno, Mega2560 and Raspberry Pi 3/2/B+ as well as working with both 400- and 830-hole breadboards.SUPERIORLY DESIGNED SLOTS- The slots are specially designed for TF cards, HDMI and USB cords to be inserted without hindering the power connection.
WELL-CRAFTED DESIGN- The RAB Holder has a customized, sleek design that is attractive and is more comfortable to touch while working with it.
DYNAMIC PORTABILITY- Able to be easily moved, carried, and fixed on a flat table for working and creating experiments.
AFFORDABLE PRICE- The holder is available for a cost-efficient price that is the best in the industry for the best quality.
Description
Arduino Raspberry Pi Holder BreadboardTAGLINE
Well-crafted and sleek companion to any Raspberry Pi and Arduino device.
OVERVIEW
The RAB Holder is a superior holder for Arduino and Raspberry Pi hobbyists to make experiments and save the results conveniently.
DESCRIPTION
For kids and adults who are interested in building and learning Raspberry Pi devices - the SunFounder RAB Holder is the best holder to fix Arduino and Raspberry Pi boards on one surface - simplifying the circuit building process and creating a fun memorable experience.
WARRANTY
Free Returns: 30-day by default at Amazon
Free Replacement: 90 Days
Free Repair: 12 Months
Warranty Exceptions: man-made error-caused and intentional damage are not warranted
SPECIFICATIONS
Item Dimensions: 20*13.5*0.5 mm
Package Dimensions: 22*16*1mm
Item Weight: 95g
Package Weight: 103g
PACKAGE INCLUDES
2x M3*10 Screw
4x M2.5*6 Screw
6x M3*6 Screw
1x RAB Holder
1x Screwdriver
3. ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA Nano
Feature
Updated from the old version (others): Received great ideas from our customers taken into considerationRemoved the light cup and mercury module which are banned in Europe. (37 sensor kits from other sellers have mercury, please pay attention.)
Removed useless modules like heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS3231 real time clock module etc.
Upgraded tutorial only for Arduino UNO R3, UNO, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team.
100% compatible with Arduino, Raspberry Pi and STM32.
Description
Elegoo Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in Amazon market.
It is 100% suitable for Arduino beginners.
And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yourself. We only offer the tutorial for Arduino in our CD.
The kit has only sensor modules, if you want to use it, you will need the wires and controller boards.
Component listing:
1 x Joystick Module
1 x Relay Module
1 x Rotary Encoder Module
1 x DS-3231 RTC Module
1 x Ultrasonic Sensor Module
1 x HC-SR501 PIR sensor Module
1 x Flame Sensor Module
1 x Linear Hall Module
1 x Metal Touch Module
1 x Digital Temperature Module
1 x Big Sound Module
1 x Small Sound Module
1 x RGB LED Module
1 x SMD RGB Module
1 x Two-tone Color Module
1 x 7 Color Flash Module
1 x Laser Emit Module
1 x Shock Module
1 x IR Receiver Module
1 x IR Emission Module
1 x Tilt Switch Module
1 x Button Module
1 x Active Buzzer Module
1 x Passive Buzzer Module
1 x 18B20 temp Module
1 x Photo-resistor Module
1 x Temperature and Humidity Module
1 x GY-521 Module
1 x Photo-interrupter Module
1 x Tap Module Module
1 x Membrane Switch Module
1 x Avoidance Module
1 x Tracking Module
1 x Magnetic Spring Module
1 x Water Lever Sensor
1 x Power Supply Module
1 x LCD1602 Module (with pin header)
4. ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice package.The most economical way to starting Arduino programming for those beginners who are interested.
LCD1602 module with pin header (no need to be soldered by yourself).
This is the upgraded starter kit with power supply module, 9V battery with DC .
High quality Arduino UNO R3 Compatible. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit.
Description
Elego Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
30pcs Resistor
10pcs Female-to-male Dupont Wire
5. SainSmart 3.2-Inch SSD1289 Touch Screen With SD Slot for Arduino Raspberry Pi
Feature
Wide viewing angleSSD1289:240 RGB x 320 TFT Driver
Integrated Power, Gate and Source Driver With RAM
ADS7843:4-WIRE TOUCH, UP TO 125kHz CONVERSION RATE, SERIAL INTERFACE
Description
SainSmart 3.2" TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and mutilfunctional module for your project.The Screen include a controller SSD1289, it's a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.6. Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Feature
Microcontroller ATmega328POperating Voltage (logic level) 5 V
Input Voltage (recommended) 7V-12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
Description
Features:Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Fully Compatible to Arduino Nano V3.0 ATmega328P-AU
ATmega328 Microcontroller
Bootloader installed, ready to upload sketches from Arduino software
Microcontroller ATmega328P-AU
Operating Voltage :5V
Input Voltage (recommended) 7V-12V
Input Voltage (limits) 6V-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Dimention:Approx. 45x17x19mm
Cable Length:245mm
Color:Blue(as the picture shows)
Package:
1 xNano V3.0 ATmega328P Arduino Compatible Board
1 xMini USB Cable
7. ARDUINO - A000005 - DEV BRD, ATMEGA328, ARDUINO NANO 3.0
Feature
ARDUINO A000005 DEV BRD, ATMEGA328, ARDUINO NANO 3.0Description
- DEV BRD, ATMEGA328, ARDUINO NANO 3.0
- Silicon Manufacturer:Atmel
- Core Architecture:AVR
- Core Sub-Architecture:megaAVR
- Silicon Core Number:ATmega328
- Silicon Family Name:ATmega
- Kit Contents:Board only
- Supported Devices: ATMEGA328
8. SunFounder Ultimate Sensor Kit for Arduino R3 Mega2560 Mega328 Nano - Including 98 Page Instructions Book
Feature
Premium SunFounder kit of up to 37 self-designed sensor modules for you to learn basic knowledge about Arduino and sensors.
With detailed user manual containing 35 projects, covering description and breadboard images; provides code, Fritzing images, datasheets, and so on.
The user manual [PDF] can be downloaded from Technical Specification in the Product Information.
Well-designed case for with 8 grids for storing the components by category; with anti-reverse cables (pin socket soldered on the modules).
The Arduino control board is not includedDescription
The kit is special in consisting mainly of sensor modules. Each sensor is made in the format of module which integrates some necessary components, such as comparator, resistor, and capacitor and so on, so it's convenient for circuit connection. This kit can help you "control" the physical world with sensors.
Code, Fritzing files and datasheets are free to view and download under the LEARN section on SunFounder website.
36 Experiments with Modules
Lesson 1 Display by I2C LCD1602
Lesson 2 Analog Hall Sensor
Lesson 3 Switch Hall Sensor
Lesson 4 Analog Temperature Sensor
Lesson 5 Temperature Detection by Thermistor
Lesson 6 Auto-flash LED
Lesson 7 Barometer
Lesson 8 Real-time Clock Module
Lesson 9 Flame Alarm
Lesson 10 Flammable Gas Detection
Lesson 11 Humiture Detection
Lesson 12 Joystick PS2
Lesson 13 Controlling an LED by Button
Lesson 14 Vibration Switch
Lesson 15 Touch Switch
Lesson 16 Photo-interrupter
Lesson 17 Photoswitch
Lesson 18 Reed Switch
Lesson 19 Relay
Lesson 20 Blinking an LED by Potentiometer
Lesson 21 Tilt Switch
Lesson 22 Buzzer
Lesson 23 Digital Temperature Sensor
Lesson 24 Rainbow LED
Lesson 25 Infrared Receiver
Lesson 26 Dual-color LED
Lesson 27 Sound Sensor
Lesson 28 Rotary Encoder
Lesson 29 Laser Transmitter
Lesson 30 IR Tracking Sensor
Lesson 31 IR Obstacle Avoidance Sensor
Lesson 32 Color Detection
Lesson 33 Analog-Digital Converter
Lesson 34 Raindrop Detection
Lesson 35 Distance Detection by Ultrasonic
Lesson 36 Thermostatic Water Tank9. 5pcs Nano Terminal Adapter Shield Expansion Board, Nano V3.0 AVR Atmega328P-AU Adapter for Arduino Nano V3.0 AVR Atmega328P-AU Module
Feature
Designed for Arduino Nano V3.0The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projects.
Finished ProductThese boards are fully assembled. No soldering required. Size is about 2.21" x 1.65" x 0.50" (L* W* H).
Nice Platform for Wiring CircuitsIt provided a nice platform for wiring circuits to Arduino Nano.It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano.
Easy to UseYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard.
Little TipsIt lables for Arduino Nano version V3.0, however you can still use this adapter for the previous version (just have to remember that A0-A7 are in the reverse order).Description
Features:
This is a small and simple Arduino nano expansion board.
It will lead out all the Nano pins, it is convenient for us to wiring and experiment.
Great for temporary things you don't want to solder.
It provided a nice platform for wiring circuits to an Arduino Nano. It can be used in conjunction with or in place of a breadboard.
It lets you make a temporary circuit without the reliability issues you get with prototyping boards, but maybe need a bit more effort.
You need to use your Nano to hold the black pin headers straight and flat during soldering.
Size: about 2.21" x 1.65" x 0.50" (L* W* H)
Package Including:
5 *Nano Terminal Adapter Shield Expansion Board10. NOYITO CNC Shield V4 Engraving Machine Kit Expansion Board Compatible for Arduino Nano
Feature
3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers.t has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.
3 axis stepper motor driver , Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
2A can be controlled within the two-phase four-wire stepper motor. Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
Released the I2C interface, you can connect to the LCD I2C or other I2C module.
Power: DC5V interface, 7.5-12V voltage input. GRBL compatible
Description
NOYITO CNC Shield V4 User Manual Download link:
https://www.amazon.com/clouddrive/share/jVwNBx0aICcjdnrXMCYvlzvH1dojQwpLqj4SfBYH8Dy
Noted:
A.
The firmware of this product is different from the one of official web, that is, they have different interfaces. So in config.h, corresponding interfaces of our products is shown as below:
#define X_STEP_BIT 5 // Uno Digital Pin 5
#define Y_STEP_BIT 6 // Uno Digital Pin 6
#define Z_STEP_BIT 7 // Uno Digital Pin 7
#define X_DIRECTION_BIT 2 // Uno Digital Pin 2
#define Y_DIRECTION_BIT 3 // Uno Digital Pin 3
#define Z_DIRECTION_BIT 4 // Uno Digital Pin 4
corresponding interfaces of official web is shown as below:
#define X_STEP_BIT 2 // Uno Digital Pin 2
#define Y_STEP_BIT 3 // Uno Digital Pin 3
#define Z_STEP_BIT 4 // Uno Digital Pin 4
#define X_DIRECTION_BIT 5 // Uno Digital Pin 5
#define Y_DIRECTION_BIT 6 // Uno Digital Pin 6
#define Z_DIRECTION_BIT 7 // Uno Digital Pin 7
B.
The product is equipped with A4988 driver module. If you want to change working mode, just need to adjust the level of ms1 ms2 ms3(DRV 8825 ms0 ms1 ms2) that have been connected to three pairs of pin header(with jumper cap).
If plugging a jumper cap, the circuit is connected to GND. Namely, ms1 ms2 ms3(DRV 8825 ms0 ms1 ms2) are connected to GND, meaning the working mode has changed into full-step mode. The circuit is disconnected without jumper cap. If you want to connect the circuit with high level, you have to connect it to VCC by soldering.
Package Included:
1pcs NOYITO CNC Shield V4 Engraving Machine Kit Expansion Board
Conclusion
All above are our suggestions for arduino nano accessories. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using arduino nano accessories with us by comment in this post. Thank you!
You May Also Like
