There are many reasons you might choose to buy v2 network analyzer but it is not easy to find the best suitable v2 network analyzer for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best v2 network analyzer.
Best v2 network analyzer
Rank
Product Name
Score
Related posts:
Best v2 network analyzer reviews
1. AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Duplexer, Voltage Standing Wave Ratio, Phase, Delay
Feature
Upgraded Version: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specificationsplease refer to below path to get the firmware updated: drive. google .com/drive/folders/1Lr7AOTg2pAhYBZDfaiPVZTMZkFO14PMj
The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz); Flip Display, you can flip the display for your convenience usage
NOTE: The new batch of SAA2N analyzers have been upgraded to the laser labeling on the control dashboard, so you might find it difficult to read at the first sight, the former labeling is easy to fade after long-time usage, and we are still working on it. PC Connection: the device can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files
2. Upgraded NanoVNA-F V2 Vector Network Analyzer 50kHz-3000MHz HF VHF UHF VNA Antenna Analyzer 4.3 inch with 5000mA-h,Measuring S-Parameter Voltage SWR, Phase, delay, Smith Chart
Feature
4.3 inch Large Touch screen and powerful functionHandheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mA-h 3.7V battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
Measurement Range The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
Compact and Powerful: Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching.
3. NanoVNA V2 4.3 Inch 3GHz NanoVNA-F V2 Vector Network Analyzer S-A-A-2 Antenna Analyzer 50kHz-3000MHz Short Wave HF VHF UHF SWR,with Aluminum Case,IPS LCD Screen
Feature
Large Screen 3G NanoVNA-F V2 with 4.3-inch IPS LCD display,ultra-wide viewing angle,long-term use does not hurt your eyes;Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.Measurement Frequency & Wide Application The measurement range of 3G NanoVNA-F is extended to 50k-3GHz,the dynamic range is improved, reach to 80db. Can be used to debug the duplexer, more accurate, and simple.Which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.
Standby Time IncreaseBuilt-in 5000mAh lithium battery, standby time up to 7 hours, Using high current 2A charging IC to Shorten charging time, and extended 5V/1A USB output interface. It can be used as a Mobile Power Pack to charge mobile phones when not in use.
Metal Shield The RF front end is designed with a metal shield to make the S21 dynamic range better than 80dB over the entire frequency range. Sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy.The radio frequency interface is SMA, which is convenient for connecting various tested parts.Support Chinese and English interface;Support screen brightness adjustment;Support host computer, you can use computer as display operation interface.
Package List1 * 4.3inch 3G NanoVNA-F V2 Host;1 * SMA Open Calibration Kit;1 * SMA Short-circuit Calibration Kit;1 * SMA 50 Load Calibration Kit;1 * SMA-KK Double-Head Female Hole Adapter;1 * SMA-JJ Double-Head Male Pin Adapter;1 * SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter;2 * 200mm SMA-JJ RG405 RF Cable;1 * USB Type-C Cable;1 * White Touchscreen Pen
4. Nanovna SAA-V2 Vector Network Analyzer 10KHz~3GHz HF VHF UHF Antenna Analyzer 3.2" inch Touchscreen with Case,Measuring Duplexer, The Filter,S Parameters, Voltage Standing Wave Ratio, Phase,Delay
Feature
NEW UPGRADE FNCTION : Own our Seesii 3GHz Vector Network Analyzer,you can test the standing wave impedance of the antenna, you can also debug the duplexer, the insertion loss of the filter, the isolation, the standing wave, you can also test the attenuation of the cable, shorten the coefficient, the phase, you can also test the amplification of the antenna amplifierPOWERFUL FREQUENCY METER: The improved frequency measurement can measure the antenna frequency of 2.4G up to to 3G. 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
IMPROVED ACCURACY: NanoVNA SAA-V2 Vector Antenna analyzer equipped with the upgraded shell,Strong anti-interference, improve accuracy.with 3.2 inch touch screen and touchscreen pen,make more accurate and easy to operate.
POWERFUL SECURE POWER SUPPLY: This SAA-V2 is battery powered or USB powered; Built in 2000mA-h battery, could work for about 3 hours continuously, if need extra working time, it can be connected to power bank or power source.
COMPATIBLE :The 3GHz second-generation NanoVNA vector network analyzer is based on OwOComm's S-A-A-2 design, and its performance is greatly upgraded.Can be control by PC,computer software compatible with Linux, Windows (7+)
5. AURSINC NanoVNA SAA-V2 Vector Network Analyzer 50KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 1950mAh Aluminum Case
Feature
[IMPROVED TO 3G] The SAA-V2 vector network analyzer has been impooved to 3G; Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)[NEW UPGRADED VERSION] The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the S-A-A-2/NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
[PC CONNECTION] the SAA-V2 NANOVNA can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also supports Nanovna-Saver for extracting the data for displaying on a computer, and for saving to Touchstore files.
[MULTIPLE FUNCTION] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters.
[Flip Display] For a much more convenient usage, you can flip the display as the following steps: Menu - Display - Flip Display. Package include S-A-A-2 host (with battery) x1, Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1
6. NanoVNA V2 3G Vector Network Analyzer Metal Shell Touch Screen 2.8 Inch Antenna Analyzer 50KHz~3GHz Shortwave HF VHF UHF Standing Wave Spectrum Analyzer
Feature
3G upgrade version: NanoVNA V2 vector network analyzer measuring frequency range is 50KHz~3GHz. The network analyzer is based on the design of OwOComm, adopts a 2.8-inch TFT LCD touch screen display, optimizes the appearance design, battery capacity and internal configuration, and is equipped with high-performance calibration kits and packaging accessories, so as to develop and produce an easier vector network analyzer to carry and use.Large-capacity battery and stylus: The antenna analyzer's 1950mAh large-capacity battery has longer standby time and durability compared to the previous model. Equipped with a resistive screen stylus, which greatly improves the situation of poor touch and inaccurate click on the screen.
Metal shell: NanoVNA V2 3GHz is made of high-quality metal materials, which can fully protect the internal precision circuits, practical, easy to operate, and long service life.
Easy to carry: Vector network analyzer is equipped with EVA outer packaging, which is easy to carry and store, practical, and has a long service life. If you have any questions, please contact us in time, we are willing to help you solve the problem.
Good amplitude and phase stability: 2 customized high-performance SMA RF cables provide good amplitude and phase stability, no need to connect to a power supply, get rid of the shackles of data cables, and can be used alone.
7. NanoVNA S-A-A-2 V2 Vector Network Analyzer 10KHz~3GHz HF VHF UHF Antenna Analyzer 2.8" inch, Measuring Duplexer, S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart Nano VNA
Feature
The S-A-A-2 NanoVNA V2 is only 2.8 inch screen, It's compact and small to carry on. But it has an advanced configuration, Such as it add wifi, GPS, Blutooth function when you connect the computer.It has more superior frequency than other nanovna,the 50K-1500MHz frequency range provides better than 70dB dynamic, and the extended 150M-3000MHz band provides better than 60dB of dynamics.
The Nanovna V2 could connect windows computer, After you download the software VNA-QT or Nanovna Saver, It can display on bigger screen.
With the useful function,it can improve data accuracy. Built-in 1950mAh battery, It has a longer use time, and it supply by USB.
It's convenient for you to test the nanovna. And it also suitable for other nanovna. SMD electronic components have been soldered.
8. NanoVNA S-A-A-2 V2 Vector Network Analyzer 10KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with Metal Shell Case Nano VNA
Feature
Up to 3GHz vector network analyzer, designed in collaboration with OwOComm.And upgrade metal shell, which is designed to reduce the external interference and improve the measurement accuracyTransmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
This NanoVNA_V2 is battery powered or USB-C powered; Built in 2000mAh battery, could work for 6-8 hours continuously,you can use your powerbank or USB Plug supply
The S-A-A-2/NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
NanoVNA-V2 host (with Metal Shell ) x1, Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1, SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1,Portable Carrying Bag x1
9. NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4" inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart
Feature
Upgraded NanoVNA SAA-2N V2.2 VersionNot only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and testCalibration The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
Improved Frequency Range:transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
Improved PerformanceHigh stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
What You Can Get1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services
10. AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Duplexer, Voltage Standing Wave Ratio, Phase, Delay (Blue)
Feature
The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
PC Connection: the device can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files.
