Best thermostat controller for water for 2020

There are many reasons you might choose to buy thermostat controller for water but it is not easy to find the best suitable thermostat controller for water for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best thermostat controller for water.

Best thermostat controller for water

Related posts:

Best thermostat controller for water reviews

1. BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108F, 8.3A 1000W ETL Listed

Feature

Control temperature evenly in colder or warmer environments
Easy plug-in operation with illuminated indicator light and 3-Prong ground plug
Provide constant optimum temperature between 40-108F for your specific crops
Do not immerse controller or probe into water. Rated Voltage: 120VAC 60Hz, Max Loading: 8.3A 1000W.
Temperature Control Range: 40-108F, Temperature Display Range: 32 -140F

Description

The Century Digital Heat Mat Thermostat Controller allows gardeners to select and maintain optimum; Rooting temperatures for faster seeding or cutting growth. It is compatible with many other heat mats. It works great for controlling plant or pet heat mat temperature. Programming: 1. To display in celsius, Please Press and Hold "DOWN" button for 3 seconds. Press and Hold "UP" button for 3 seconds to display temperature in Fahrenheit. 2. To adjust the temperature setting, Press and Hold "SET" button for 3 seconds to enter the temperature selection mode. Press the " UP" or "DOWN" button to adjust the temperature that you want to set. Then Press "SET" button again. So the setting temperature is done. Press "SET" button to display the preset temperature. When the unit is plugged into an electrical outlet, the "POWER" LED becomes lit, the heat on only when the "HEATING" LED is lighted. When the preset temperature is reached, the "HEATING" LED will turn off and there is no power to the heat mat. ATTENTION: If the thermostat remains "ON" ( delivering power to the heat mat) for more than 5 consecutive hours, it indicates the desired temperature is not being reached. To achieve higher temperature the Mat may need to be placed on a more insulated surface. Covering the seedling tray with a humidity dome will also help heat retention. Do not Immerse controller or probe into water. Do not exceed a total of 1000 watts of heating devices plugged into thermostat.

2. Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Feature

This temperature controller is convenient to play and plug.
The heat and cool functions can work simultaneously. BTW also work separately.
It is with temperature calibration and compressor delay which can protect your refrigeration.
Buzzer Alarm: High and low temperature alarms are available when the temperature is over or the sensor is with issue
Warranty: 1 Year.

Description

Temperature Control Range : -58~210 F
Temperature Resolution: 0.1 F
Temperature Accuracy: 1F (-50 ~ 160 F)
Input Power: 100 ~240VAC, 50Hz/60Hz
Sensor Length: 2m / 6.56ft
Sensor Type: NTC sensor (Including)

Package:

1 x Temperature controller with outlet,
1 x English Manual

3. Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature Controller Outlet 110V 1200W Digital Temp Control for Greenhouse Heater Cooler Reptile Brewing Fermentation Kegerator Probe

Feature

Plug and play design, easy to use.
Compressor delay protection for refrigeration control.
Centigrade or Fahrenheit Display
Connect with refrigeration and heating equipment at the same time
It is very great for fermentation, kegerator, aquariums, hatching, ect.You can set the value as your requirement.

Description

Features:

Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

It has certificate of EMC, LVD, RoHS, FCC compliance.

Package Content:
1x Temperature controller ITC308
1x Manual

4. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Feature

KEEP TEMPERATURE IN DESIRED RANGE: It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
With compressor delay protection function for refrigerating control

Description

This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.

This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100F, set span value to 10F. The relay will be connected when temp drop to 90F. The relay will be disconnected when temp reaches 100F;
If you choose cooling mode, set control Value to 100F, set span value to 8F. The relay will be connected when temp reaches 108F. The relay will be disconnected when temp drops to 100F

Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220F
3.Temperature measure resolution: 1
4.Accuracy: 0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 - 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft

Package Content:
1x Digital Temperature controller

5. WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

Feature

WE'VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1

6. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding

Feature

Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Support reading with Centigrade or Fahrenheit unit
Maximum output load: 1100W(110V)
Dual display window, be able to display measured temperature and set temperature at the same time

7. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

Feature

Simplified Design---Plug and play, easy to set. Support C/F display
Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230F(-50 ~ 110C)

8. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A

Feature

Simplified Design---Plug and play, easy to set. Support C/F display.
Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230F(-50 ~ 110C)

9. BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W

Feature

EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controllers status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
Century to BN-LINK: Your product might come in the brand of BN-LINK or Century as we are currently rebranding to BN-LINK. Please be assured that the quality remains the same.
SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108F, temperature display range is 32 -140F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

10. Inkbird Heating Thermostat Aquarium Reptile Submersible Probe Sensor ITC306T Relay Digital Greenhouse Temperature Controller Dual Stage Timer Switch Only Heat Plug Outlet No Cooling

Feature

ONLY heating outlet aquarium sensor heater for aquarium, reptile.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the needs of aquarium.
This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control.
The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
/ Display can be chosen. Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.

Conclusion

All above are our suggestions for thermostat controller for water. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using thermostat controller for water with us by comment in this post. Thank you!