Top solder wick with flux for 2020

When you looking for solder wick with flux, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable solder wick with flux is not an easy task. In this post, we show you how to find the right solder wick with flux along with our top-rated reviews. Please check out our suggestions to find the best solder wick with flux for you.

Best solder wick with flux

Related posts:

Best solder wick with flux reviews

1. NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Feature

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
Available with standard or anti-static bobbins

Description

NTE Solder Wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.

2. AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

Feature

High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size

Description

AUSTOR 7 Pieces Solder Sucker & Desoldering Wick kit, including 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Solder Wick

Product instruction
How to Use the Solder Sucker
Product instruction
How to use the solder sucker
First: press down the plunger until it is locked with the sucker.
Second: heat up the solder until it become liquid.
Next: place the solder sucker near to the liquid,then press the button.
Last: repeat this process if needed.

Note
1. Don't take apart the nylon suction nozzle when you recive the desoldering sucker first time to prevent escapes.
2. Don't forget to put the black elastic back on the sucker after you pour the scruff out of it, then screw the nylon suction nozzle to ensure the sucker can be normal use.
3. If you find the double sping device no spring pressure when pressing the plunger, check whether the nylon suction nozzle had been screw tightly.

How to use the solder wick
First: place the wick over the solder which you want to remove.
Second: heat the wick and sold area by the soldering iron.
Next: remove the wick once the solder has been absorbed.
Last: cut off the wick you have used, repeat this process if needed.

Specifications
Desoldering Pump
Material: ABS
Length: 206mm
Diameter: 20mm
Solder Wick
Material: Copper with rosin
Wideth: 2.0mm/2.5mm/3.0mm
Length: 1.5m
Diameter: 55mm
Package include
1 * Desodering Pump
2 * Solder Wick 1.5M x 2.0mm
2 * Solder Wick 1.5M x 2.5mm
2 * Solder Wick 1.5M x 3.0mm

Product Warranty

All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don't hesitate to contact us. We will get you back within 24hours.

3. Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Feature

One-handed solder sucker with powerful suction Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
Desoldering Wick with copper braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
ABS body with non-slip sponge and Nylon nozzle desoldering pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
Widely used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

Description

TABIGER Solder Sucker & Solder Wick
It's a must-have tool for electronics kit, you can use them togethersolder sucker for large amounts, while the solder wick used in small, hard to reach areas.

How to Use the Solder Sucker:
Step 1: Press the plunger down until you hear a click sound;
Step 2: Heat up solder around item to be removed by using a soldering iron;
Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
Step 4: Repeat this process if necessary.

How to Use the Desoldering Wick:
Step 1: Place the wick over the solder you need to be removed and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed.

Package Included:
1* Solder Sucker
2* Solder Wick

4. Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.

Feature

Price For: Each Braid Material: Copper Width: 2.5mm Length: 50ft Braid Color: Blue Leaded Process Compatible: Yes Roll Length: 50ft RoHS Compliant: Yes

5. MG Chemicals Desoldering Braid #5 Fine Braid Super Wick with RMA Flux, 5' Length x 0.125" Width, Brown

Feature

Oxide-free clean copper
Static free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe
NSF - Nonfood Compounds Program Listed P1, NSF Registration #144207

6. MG Chemicals Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 5' Length x 0.05" Width, Yellow

Feature

Oxide-free clean copper
Static free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe
NSF - Nonfood Compounds Program Listed P1, NSF Registration #144208
ESD Safe Spools - Yes

7. SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar

Feature

The ideal flux for electrical and electronic repairs
Contains 2 ounce in a "Hockey puck" Jar
Formulated for use with tin/lead and lead-free alloys
Dimensions: 2.5 Dia x 1 H (64 x 25.5 mm)
Does not need to be cleaned
Active temperature range: 93 315c/ 200 600
Made in USA

8. CHEMTRONICS 80-3-5 BRAID, DESOLDERING, ROSIN SD, 5FT

Feature

Price For: Each Braid Material: Copper Width: 2mm Length: 5ft Braid Color: Green Braid Size: #3 Features: Packaged in ESD-Safe Static-Dissipative Bobbin Flux Type: Rosin Activated RA Leaded Process Compatible: Yes RoHS Compliant: Yes
Country of Origin:United States
Package dimensions:15.24"L x 7.62"W x 0.51"H
Package weight:0.8 lb

9. Chemtronics 80-3-10 Soder-Wick Rosin SD Desoldering Braid

Feature

Price For: Each QTY 1 10' SPOOL

10. Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length

Feature

High quality desoldering braid
Unique no clean flux for easy to use
Pure oxygen free copper wire
Geometrically-precise weave
Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz

Conclusion

By our suggestions above, we hope that you can found the best solder wick with flux for you. Please don't forget to share your experience by comment in this post. Thank you!