When it comes to choosing your routing table fence, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best routing table fence. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best routing table fence.
Best routing table fence
Rank
Product Name
Score
Related posts:
Best routing table fence reviews
1. KREG PRS5000 Precision Router Lift
Feature
Allows precise above-the-table setup changes for table-mounted routersAbove-table collet access allows fast, easy, above-table bit changes
38" x 9 14" x 11 34" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won't Sag, resists scratches
Fits all Kreg Router tables and many competitive brands
Bearing-guided carriage provides smooth operation
Description
Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 38" x 914" x 1134" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router modelswithout the need adapters or modificationsin a high-performance carriage that you raise and lower from above the table. With the Precision Router Lift, theres no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lifts included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lifts built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well. Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriageand your bitexactly 116", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts. Whether youre upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.2. Kreg PRS2100 Bench Top Router Table with Essential Accessories
Feature
Industrial-quality fence containing adjustable faces, dust collection, vertical jointing and new cam clampsFull-size router insert plate with precision plate levelers and new Level-Loc reducing rings
Extra-large 16" x 24" MDF table top with an Easy-Slide surface
Wide stance heavy-duty steel stand for increased stability
Includes: MDF top, full-size insert place with 3 Level-Loc rings, insert plate levelers, extruded aluminum fence and heavy-duty steel stand
Description
Industrial-quality fence containing adjustable faces, dust collection, vertical jointing and new cam clamps Full-size router insert plate with precision plate levelers and new Level-Loc reducing rings Extra-large 16 x 24 MDF table top with an Easy-Slide surface Wide stance heavy-duty steel stand for increased stability Includes: MDF top, full-size insert place with 3 Level-Loc rings, insert plate levelers, extruded aluminum fence and heavy-duty steel stand3. Rockler 4-Piece Router Table Accessory Kit
Feature
Brand New in box. The product ships with all relevant accessoriesDescription
Our 4-Piece Router Table Accessory Kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback. Two of the featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the table and keeps your work against the fence. Features: Dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up Table mounted featherboard which fits miter slot openings of 3/8 deep x 3/4" wide, can be secured anywhere along the miter track with the twist of the knob Fence-mounted featherboards slip into the accessory T-track, and are easily adjustable without tools4. Bosch Benchtop Router Table RA1181
Feature
SUPPORT: The tall aluminum fence measuring 4-7/8 in. x 25-1/8 in. can handle tall stock with ease. The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and outfeed can be offset for jointing. Attaches to any workbench.PRECISION: The Bosch RA1181 features a rigid aluminum router mounting plate that stays flat and precise for accuracy. For added versatility, it's pre-drilled to fit a variety of routers.
EASY TO USE: Two easy-to-use featherboards attach to fence and router table, providing additional guidance and protection against kickback. They're fully adjustable to fit a variety of workpieces.. Accessory slot accepts additional featherboards and 3/4-inch optional accessories such as miter gauge.
CLEAN UP: With a cabinet-style design, the RA1181 is able to feature a dust collection port in the fence for removing any jobsite dust and debris. The port fits standard 2-1/2-inch vacuum hoses to connect to dust collection system or shop vacuum.
CONVENIENCE: Includes Set of three Mounting Plate Insert Rings to adjust opening to bit size, Hardware for mounting Bosch and many competitive routers, adjustable featherboards , Adjustable Clear Guard , Starter Pin and Guard , Outfeed Fence Shims - 1/16 in. Thick
Description
The Bosch RA1181 benchtop router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2-1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for router curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.5. Kreg PRS2100 Bench Top Router Table
Feature
Industrial-quality fence containing adjustable faces, dust collection, vertical jointing and new cam clampsFull-size router insert plate with precision plate levelers and new Level-Loc reducing rings
Extra-large 16" x 24" MDF table top with an Easy-Slide surface
Wide stance heavy-duty steel stand for increased stability
Includes: MDF top, full-size insert place with 3 Level-Loc rings, insert plate levelers, extruded aluminum fence and heavy-duty steel stand
Description
Kreg's freshly redesigned Precision Bench top Router Table (new item# PRS2100) now offers even more features that give it the capability of a full-size, industrial router table in a portable package. More than ever before, this makes the Precision Bench top Router Table a perfect routing solution, whether they want a router table to use on a job site or compact router table to use in the shop. You will notice the all-new router insert plate right away. It measures 9-1/4" x 11-3/4" x 3/8" to support even the biggest routers and it features Kreg's new Level-Loc Reducing Rings. These rings simply twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1-3/16" (for use with Porter-Cable style guide bushings) and 2-5/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router and it comes with a set of Kreg's Precision Insert Levelers. The redesigned Precision Bench top Router Table also features Kreg's upgraded industrial-quality fence. It features all-new cam clamps that allow you to adjust the fence quickly and easily and lock it in place securely. Like before, the fence is made from anodized aluminum, has adjustable sliding faces and works as a vertical jointer. To make routing even easier, the Precision Bench top Router Table has a large 16" x 24" table that's made from thick MDF to dampen vibration. The table offers the same durable Easy-Slide skin as Kreg's full-size router tables and has a miter gauge slot. That table is supported by a heavy-duty steel stand that has a wide stance for extra support, plus thick rubber feet to dampen vibration. The open design helps reduce router noise and the base has predrilled holes that allow it to be enclosed if desired.6. Kreg PRS1025 Router Table Top
Feature
Router Table TopA keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
7. Goplus Electric Aluminum Router Table Wood Working Craftsman Tool Benchtop
Feature
Extra Large Extension Table to the Main TableBesides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" 18" and an easy-slide surface, helping you complete routing projects better.Retractable Guard and Suits Most Router BitsThere is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (155mm) diameter base plate. Router bits with base plates within this size all works.
Multifunctional Fence and Exact Miter GaugeThe fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles.
Selected Material and Rugged Durable FrameConsists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability.
Quick Installation and Easy Care and CleaningComing with detailed instruction manual, you can easily complete the assembly by referring to it. The grooved surface keeps dust and chips away from work place, making cleaning easier. Its easy to maintain this router in a dry and cool place.
8. Incra WONDERFENCE37 Wonder Fence Router Table Fence
Feature
Heavy-duty, one-fence solution for all of your router table operationsProduces perfect box joints and dovetails in all styles
Includes a hi-rise 4 1/2-inch fence cap for vertical panel raising and tall boards
Includes Incra TS-III table saw fence
All critical surfaces machined are perfectly flat
9. Woodpeckers Precision Woodworking Tools SF-36SINGLE Single Offset Super Fence, 36-Inch
Feature
Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inchThe two fence halves automatically line up perfectly parallel when tightened down
Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
Variable throat capabilities to handle router bits up to 4-inches in diameter
Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
10. Micro Adjuster for Router Table Fence
Feature
Sold on Amazon11. Woodpeckers RT2432-PH Phenolic Router Table, 24-Inch x 32-Inch
Feature
VERSATILE - A combination miter channel and T-track as well as two rotor table fence mounting tracks are embedded into the table top. Each table is pre-drilled with threaded holes for attaching to our steel router table standsCOMPATIBILITY - The router plate opening is 9" x 11" by just over 3/8" deep with " radius corners making it compatible with most standard router mounting plates and liftsk
QUALITY - This 24" x 32" phenolic wood router tool table top is made from a low friction, high hardness mineral top that is stronger and longer-lasting than PVC used by competing Router lifts. Not affected by humidity, heat or even water
PRECISION - To ensure consistently tight tolerances, we machine each one on our own state-of-the-art CNC equipment using high quality cutting tools for the best fit and finish
MADE IN USA - This premium, precision woodworking tool is built in the USA. (Router Table Stand #RTS2027 fits the #RT2432-PH router table and the #RTS2037 fits the #RT2743-PH router table)
12. KREG Precision Router Table System, Kreg# PRS1045
Feature
24" x 32" router table top includes a router insert plate with three molded Level-Loc reducing rings36" T-square style router table fence features a micro-adjust wheel for precise setups
Outfeed anchor has been redesigned for more usable table space and easier removal
Multi-purpose steel stand is adjustable from 31" to 39" in height
Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand. #148166 KREG 4pc Casters Set not included.
13. Featherboard, DRILLPRO Double Featherboards Feather Loc Board for Table Saws Band Saws Router Tables Fences Tools Miter Gauge Slot Woodworking
Feature
Featherboard are Made from a HIGH-TECH POLYMER and each one has 13 ANGLED FINGERS that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.4 MITER BARS that fit most standard miter slots (3/8 x 3/4 Inch). Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
This unique Featherboard can be quickly QUICKLY and EASILY connected to a miter slot or t-slot.
A dramatic increase the ACCURACY, QUALITY and SAFETY of the cuts.
EASY to USE, EASY to INSALL and HIGHLY DURABLE.
14. Delta, 36-T30T3, 30 in. DELTA T3 Fence System
Feature
One piece square tubular railMounting design attaches to Delta table saws including Contractor Saw , Hybrid Saw , and Unisaw models
Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0. 4mm)
Easy-gliding, steel tube fence body to handle Quick, precision ripping, and square cuts
Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments
15. Taytools 300015 Deluxe 32 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port
Feature
Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
16. Taytools 300016 Deluxe 24 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port
Feature
Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
17. Leegol Electric Benchtop Router Table Wood Working Craftsman Tool
Feature
Extra Large Extension Table: Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" 18" and an easy-slide surface.Retractable Guard: There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (150mm) diameter base plate. Router bits with base plates within this size all works.
Multifunctional Fence and Exact Miter Gauge: The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles.
Material and Frame: Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability.
