Best reverse polarity switch module for 2020

It’s hard to know which is good reverse polarity switch module. There are alot of reverse polarity switch module reviews on internet. In this article we suggest top 10 the best reverse polarity switch module for you. Please read carefully and choose what is the best reverse polarity switch module for you.

Best reverse polarity switch module

Related posts:

Best reverse polarity switch module reviews

1. M-Audio SP-1 | Sustain Foot Pedal or FS controller for Synthesizers, Tone Modules, and Drum Machines

Feature

Compact and sturdy sustain pedal for use with any electronic keyboard
Designed for synthesizers, tone modules, and drum machines
Ideal for applications that require non-latching momentary switches
Plugs into 1/4-inch keyboard input; includes 5-foot cable
Slick black styling; 1-year warranty

2. SMAKN DC 12V 2CH 2 Channel Isolated Optocoupler High/Low Level Trigger Relay Module

Feature

Product Name : Optocoupler Driver Relay Module;
Relay Type : SRD-12VDC-SL-C
Coil Voltage : DC 12V;
Pole Number : 2 Channel
Weight : 33g;Package Content : 1 x Optocoupler Driver Relay Module

3. Esumsky DC 12V Auto On Off Photocell Light Switch Photoswitch Light Sensor Switch

Feature

Using photoresistor induction light intensity, built-in relay, direct control of the load
With a potentiometer sensitivity adjustment, by adjusting the potentiometer, set the start relay valve value, when the light on the threshold, relay module pull-in, dark at the threshold, the relay release, so pick up normally open with the public is the control of the switch during the day, pick up normally closed with the public is to control the switch in the evening.
Working voltage 12v. Output forms: direct connect AC 250V 10A or DC 30V 10A
Sesor Size : 60 x 20.5mm/ 2.4
Equipped with four fixed bolt hole, convenient installation. Small board PCB size: 5 cm x 2.6 cm

4. DZS Elec 12V 2 Channel High/Low Level Trigger with Optical Isolation Relay Module Fault Tolerant Design Load AC 0-250V/10A DC 0-30V/10A Circuit Switch Board

Feature

Can set high or low level trigger with jumper, to meet the demand of more trigger applications.
With patch optical isolation, strong drive ability and stable performance, the trigger current is 5mA.
With Fault Tolerant Design, humanized terminals, even if the control line is broken, the relay will not take any action.
With green power light, red relay status indicator light, can directly reflect the current module working condition.
Input voltage is 12V, the max load of interface is AC 250V/10, DC 30V/10A.

5. 24V DC Relay Module, KNACRO Multifunctional DC 24 Volt 1 Channel Relay Board Programmable Cycle Relay Module 10A Portable Timer Switch Board Power Switch Circuit 18 Modes(24V 1-Channel)

Feature

KNACRO dc 24v relay module is programmable by using the four buttons on board to set up to 18 customized functions, including automatically repeating a set time cycle.
The 1 channel relay board is with the anti-reverse of power function, hence will not cause damage on the power supply for the wrong connection of polarity.
Our cycle timer module uses top-quality high pressure resistance module and uses discrete power supply that the system is more stable and reliable.
The timer switch board has 0.1 seconds timing function; timing accuracy up to 0.01 seconds.
The 24 volt latching relay is with automatic power-saving function, users can customize the setting.

6. MVP Tarp and Winch Motor Snow Plow - Forward & Reverse Relay Module Six Terminal

Feature

12V 70 amps DC intermittent, 12V 50 Amps Continuous Service.
Maximum 5 minutes on time, then 3 minutes off time.
Popularly used on tarp and winch motors, or on snow plows.
IP-67. Epoxy sealed for moisture, dust, and vibration resistance.

7. Eletechsup DC 12V DPDT Relay Cycle Timer Module Delay Time Polarity Audio Motor Switching (1)

Feature

1 Control two independent loads, the load is activated simultaneously
2 Dual channel simultaneously controls one load (load current multiplication)
3 Control the positive and negative wires (turn off or turn on the positive and negative wires)
4 Polarity switching output (load can be low power motor)
5 Audio 2 L/R to 1 L/R Switcher

8. DC Motor Reverse Polarity Relay,Motor Reverse Polarity Delay Relay Time Delay Relay Module with Adjustable Reverse Polarity for 2A Drive Current Motor DC 5/6/9/12V

Feature

It is a timer delay module with high precision, stable and reliable performance
There are many time range for your choice, the time is adjustable
Power on to connect, and will disconnect after delay time.
Operating voltage is DC 5-12V(5V 6V 9V 12V)
Widely used on timer operating equipment, household electrical appliances, lighting delay modification, factory equipment, time delay control, etc

9. DC 5/6/9/12V Motor Reverse Polarity Relay Module Time Adjustable DPDT Delay Relay 2A Drive Current

Feature

Work mode: After power on, D1 3 blinks, enter the "work mode", D2 on Reversal, D2 off Forward.
Setup mode: Press and hold the key for 2 seconds, D1 on, enter the "setup mode", D2 off, It's forward "setup mode".
Standby timer mode, In forward "setup mode", continuously trigger KEY twice, D1 off, enter "Standby timer mode".
Timing Mode, In the "Standby timer mode" , trigger KEY to start timing(enter "Timing Mode"),D1 flashing means it is timing("Timing Mode"),Trigger KEY again to stop the clock(exit "Timing Mode"), D1 flashing time is forward time(T1).
T1: motor forward delay time, default 0.1-5000 seconds adjustable (step 0.1 seconds), T2: motor reverse delay time, default 0.1-5000 seconds adjustable (step 0.1 seconds). By "Time multiple selection" setting, the maximum delay is up to 40,000 seconds.

10. Anmbest 2 Channel WiFi Inching Self-locking Switch Module, DC 5V 12V 24V Smart Home Garage Door Automation Motor Forward Reverse Remote Controller Compatible with Alexa Echo Google home Nest IFTTT SON

Feature

The product enables remote control of home appliances through the mobile application eWeLink, available on both Android and IOS 2G/3G/4G Networks.Control your smart device by your phone anywhere.
Works with Amazon Alexa ,NEST, Echo, Google Home:Link "eWeLink Smart Home Fan" skill. You can directly ask Amazon Echo/Echo Dot/Amazon Tap to turn on/off your Sonoff devices.
Operating voltage: USB 5V,5-24V DC,5-16V AC; Supports inching /self-locking/interlock mode; 2 channel WIFI Wireless Inching Relay Switch,Independently control 2 device; Cyclic timing control, Delay switch control and Mechanical switch output.
The hardware wiring is simple, and it can easily solve the remote control of the tubular motor, the three-phase motor and the garden door.
Application: The switch can be applied to access control, turn on PC, garage door, computer application, remote control computer boot, remotely control motor forward or reverse rotation, etc.

Conclusion

By our suggestions above, we hope that you can found the best reverse polarity switch module for you. Please don't forget to share your experience by comment in this post. Thank you!