If you looking for recessed cable plate kit then you are right place. We are searching for the best recessed cable plate kit on the market and analyze these products to provide you the best choice.

Best recessed cable plate kit

Related posts:

Best recessed cable plate kit reviews

1. DataComm Electronics 45-0031-WH Recessed Low Voltage Media Wall Plate with Duplex Receptacle - White

Feature

Low profile design fits behind the industry's thinnest mounts and TV's
Conceal multiple AV cables behind your flat panel TV
15 Amp/125 Volt tamper resistant, duplex receptacle (UL Listed component)
Old work box included
Mounting wings are molded into the media plate and fasten tightly against the back of the drywall. Quick & easy to install-no additional parts needed.

Description

DataComm Electronics' new, patented Recessed Low Voltage Media Plate with Duplex Receptacle offers the convenience of a duplex receptacle and a recessed plate with enough room to store the low voltage cables behind your flat panel TV.

2. DataComm Electronics 50-6623-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution

Feature

Low profile design fits behind the industry's thinnest mounts and TVs
15 Amp / 125 Volt tamper resistant duplex receptacle allows power to be installed behind a wall mounted TV or similar application
Metal mounting wings are attached to the top and bottom plates and fasten against the drywall as you tighten
Flexible screens close the interior openings of the top and bottom plates
Female end of included extension cord is recessed completely into the wall when plugged in to the straight blade inlet
Male end of included extension cord has a 360 rotating flat head allows furniture to be placed flush against the wall for a clean finish
Includes 16/2 with ground UL approved electrical building wire which is pre-wired to the top plate
Quick and easy installation

Description

DataComm Electronics easy to install Flat Panel TV Cable Organizer Kit w/ Duplex Power Solution is used to install power and hide audio/video cables in the wall behind your wall mounted TV, amplifier, and other audio/video devices. This power kit allows you to pass low voltage cables and power through the wall, creating a professional, clean look for your home theater.

3. KCC Industries 1-Gang Recessed Low Voltage Cable Plate with Mounting Bracket +UL/CSA Listed Safe+ (2-Pack, White)

Feature

ORGANIZE CABLES - The perfect solution for concealing up to 4 low voltage audio/video cables behind your wall-mounted flat panel TV (may hold more than 4 cables depending on type)
EASY INSTALL - Simply trace the inside of the bracket onto your wall, cut it out, and install the bracket and cable plate. Cable plate can be installed with opening facing up or down
THE PERFECT MATCH - These cable plates and brackets have been tested and paired in multiple applications and are a guaranteed fit!
SAFETY CERTIFIED - Mounting bracket is UL/CSA Listed for Class 2 low voltage cables (not rated for passing AC power chords)
SATISFACTION GUARANTEE - KCC Industries is a veteran-owned business, and we offer a 100% satisfaction guarantee. Items come with a 1 year replacement warranty, and if you are not completely satisfied with your purchase within 90 days, send it back for a full refund - no questions asked!

Description

    KCC Industries 1-Gang Recessed Low Voltage Cable Plate with Mounting Bracket (2-Pack, White)

    Cable Plate

  • Designed to provide a clean look to passing low voltage cables through walls
  • Holds a multitude of different chords (phone, internet, TV, video)
  • Crafted from premium ABS plastic with a smooth white finish to blend with other wall plates in your home
  • Mounts easily to the included mounting brackets with mounting screws included
  • Can be installed with opening facing up or down
  • Outer dimensions: 2 3/4" W x 4 1/2" H
  • Interior dimensions of hole opening: 1 3/4" x 1 3/8" D (at deepest part of opening)


    Low Voltage Mounting Bracket

  • Easy to install and designed specifically for passing low voltage wires (phone, internet, TV, video) through a wall
  • Has oval mounting holes that allow for final shifting and straightening
  • Adjusts to fit various wall thicknesses (1/4" - 1"), as the bracket wings secure when mounting screws are tightened
  • Acts as its own template for cut-out; simply trace the inside of the bracket then cut the hole
  • UL/CSA Listed and provides added protection for cables that run through knockouts in metal studs


    Included in package:

  • 2x Cable Plates w/ Mounting Screws
  • 2x Low Voltage Mounting Brackets
  • 1x Mounting Instructions


    KCC Industries is a veteran-owned business, and we offer a 100% satisfaction guarantee. Items come with a 1 year replacement warranty, and if you are not completely satisfied with your purchase within 90 days, send it back for a full refund - no questions asked!

4. Buyer's Point Recessed Low Voltage Cable Wall Plate, Easy to Mount Outlet to Hide & Pass Tech Wires Through for HDMI, TV, Video, Audio, Network, Speaker Wires, Cord Concealer Cover Hider (2 Pack)

Feature

New Model Innovative mounting wings eliminate the need for a low voltage mounting bracket
Easy to use & Setup: Seamlessly manage low voltage cables for your flat screen TV & other tech
The wall plate can be installed upright or upside down
Avoid Accidents & Mess: Our recessed cable plate keeps wires internally guarded preventing accidents
Durable: Our wall plate is made from super strong ABS plastic

Description

Why Choose Buyers Point?

At Buyers Point, we understand that it can be a challenge to keep all your tech power cables under control.

Thats why we designed the ourRecessed Wall Plate, to make it easy for you to pass all your power cables through the wall and keep them concealed & organized out of harms way.

Made from durable plastic, our wall plate will permanently eradicate all your wire woes and have your home systems running seamlessly for years to come!

Perfect for families with young children or pets, or simply anyone who has a lot of tech connections on the go. Our recessed cable plate keeps wires internally guarded out of harms way preventing accidents like tripping over or animals getting tangled or chewing and scratching cables.

Dont be complacent, make sure your cables & systems are fully secured by investing in our Cable Plate today.

Key Benefits of our Recessed Wall Plate :

Easy ToUse, Set Up, And Install


Unlike Other Models, Our Wing Mounts Are Made From Durable Plastic To Withstand Breaking.


Helps Prevent Cable Accidents


Help Prevent Mess


Protects Your Tech


Perfect For Tvs, Amplifiers and More


Premium Quality

With all these great benefits, what are you waiting for? Click ADD TO CART now and never deal with the mess or cable stress again!

5. DataComm Electronics 45-0001-WH 1-Gang Recessed Low Voltage Cable Plate - White

Feature

The perfect solution for concealing low voltage audio video cables behind your wall mounted flat panel TV
Holds up to 4 cables
Can be installed with the opening facing up or down
Made of non-breakable ABS plastic
Available in 5 colors
ETL Listed in the United States and Canada
Quick and easy installation
Available in 2-gang (45-0002) and 3-Gang (45-0003)

Description

DataComm Electronics 1-Gang Recessed Low Voltage Cable Plates are used to install low voltage cables behind your flat panel TV, amplifier, or other audio and video devices. These plates are designed to be installed onto a low voltage mounting bracket. The cable plates can be installed with the opening facing up or down.

6. Echogear In-Wall Cable Management Kit - Cable Hider Conceals Low Voltage Cords - Includes 2 Pass Through Grommets, Locking Brackets, and Hole Saw Drill Attachment

Feature

Hide your cables behind the wall with this DIY cable pass-through kit. Just add a drill and you've got everything you need for a quick 20-minute install. You'll only need to skip 1 episode of The Office.
Perfect for hiding HDMI, Aux, and other low-voltage cables. Also works for in-wall rated power cables. Just make sure your dog hasn't been chewing on them first.
Includes a drywall hole saw drill attachment for a perfect grommet fit. The grommets even lock onto the back of your drywall for a secure install. Saw attachment also useful in the event of a zombie apocalypse.
Flexible pass through grommets can comfortably fit 4 large HDMI cables. There's plenty of room for even your thickest cords.
Feeling artsy? These grommets are paintable for maximum concealment. Bob Ross would be proud.

Description

Visible Cables Look Bad Don't hate - it's the truth, and you know it. But don't panic. In true ECHOGEAR fashion, we offer you an easy-to-install, DIY, cable management solution because we're friends. And friends don't let friends settle for messy, dangling cables. (Ew!) Friend, meet our In-Wall Cable Routing kit, designed to hide those ugly cords inside the wall and completely out of sight. Professional Solution Without the Professional Cost We know what you're thinking: "Inside the wall? I can't do that!" Do you have a drill? Yes? Well then, we're here to assure you that you can. And not only that, but you can do it all by yourself in 20 minutes or less. #adulting All-Inclusive Kit This one-stop-shop kit includes everything you need to get those cables out of the way. In the box you'll find a hole saw drill attachment and two low-voltage grommets (one for behind the TV and one for behind your components). We're Here to Help Questions? Installation concerns? Testing knock-knock jokes? We're here for it. Literally. We've got real-life, know-it-all product experts standing by, ready to help seven days a week. Just call us at 1-855-428-2490 or visit ECHOGEAR.com to chat with someone from our team.

7. PowerBridge TWO-CK Dual Outlet Recessed In-Wall Cable Management System with PowerConnect for Wall-Mounted Flat Screen LED, LCD, and Plasma TVs

Feature

Dual Outlet In-Wall Cable Management System for Wall Mounted Flat Screen LED, LCD, and Plasma Televisions. This kit includes Two Power Outlets for mounting either two (2) TV's OR one (1) TV and one (1) Audio Visual Accessory Such as a Soundbar.
No more messy cables hanging down the wall between the TV and the floor. No electrician needed with snap together Power Connectors.
This system allows for Wall Mounted TV's to hide low-voltage cables and wires routed behind the wall for a clean look.
The Included In-Wall PowerConnect Cable and 6-foot Power Cord is code compliant. Does not include HDMI Cables or other Low Voltage Audio Visual Cables.
Included Recessed wall mount plates are hidden behind Flat Screen TV Mount and should work with the thinnest TV mounts and thinnest TV's on the market.
Top Rated Product with Simple Easy DIY Installation.

Description

Conceal cables and power for your wall mounted TV. Introducing the all new TWO-CK in-wall power and cable management system. Dual-gang size all-in-one design. Designed to simplify wiring behind wall-mounted flat-panel TV. This discreet system allows low voltage cables and wires to be routed through the wall for a clean look. Code Compliant to install power, includes hardware and helpful mounting template make the Two-CK the perfect do-it-yourself solution for any skill level, without the need for an electrician. No wiring, simple snap together Power Connectors make this safe and easy.

8. Legrand, Home Office & Theater, Home Theater, In Wall TV Power Kit, White, 5.1, HT2102WHV1

Feature

MANAGES EXCESS CABLE via in-wall storage, and provides convenient access to back of TV when needed.
CABLE ACCESS STRAP easily handles the cables necessary to support your TV.
SUPPORTS EASY EXTENSION of electrical wiring when paired with other products in the recessed connection cable management kit family.
EASY TO INSTALL retrofit box 15A 125V decorator receptacle included.
DIMENSIONS: 2.6 x 6.2 x 8 inches

Description

The Legrand-On-Q HT2102WHV1 Flat Panel TV Connection Kit provides recessed power and cabling connections for flat panel and TV installation. This in-wall TV connection kit comes with a cable access strap that manages excess cords and provides convenient access to back of TV when needed. Easy-to-install retrofit box 15A 125V decorator receptacle included.

9. DataComm 45-0008-WH 1-Gang (2 Pack) Recessed Low Voltage Wall Cable Plate - White

Feature

Mounting wings are molded onto the back of the plates and fasten against the drywall as you tighten
Thinner profile of the cable plate is designed to fit behind the industry's thinnest mounts and flat panel TVs
Can be installed with the opening facing up or down
Designed to be installed without low voltage mounting plates or old work mud rings
DataComm 45-0008-WH 1-Gang (2 PACK) . Made of durable ABS plastic

10. VCE 2-Pack Single Brush Wall Plate Cable Pass Through Insert for Wires, Single Gang Cable Access Strap, Wall Socket for HDTV, Home Theater Systems - White UL Listed

Feature

With UL Listed, just use it without concern.
Smooth and clean HDTV Installations, perfect for HDTV cables and home theater installations
Easy set up, Installs in just minutes, Insert the brush into the outer casing and place on the wall
Run your cables cleanly and neatly through the wall, the package is equipped with mounting screws.
Note:The same size as a standard outlet wall plate(regular single outlet size), the plate DOESN'T FIT Carlon plastic OLD WORK BOXES or frames. Please comfirm the size before ordering!!

Conclusion

By our suggestions above, we hope that you can found the best recessed cable plate kit for you. Please don't forget to share your experience by comment in this post. Thank you!
Jaime Gordon