Best plasma cutting table system for 2024

When it comes to choosing your plasma cutting table system, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best plasma cutting table system. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best plasma cutting table system.

Best plasma cutting table system

Related posts:

Best plasma cutting table system reviews

1. Lutron 3-Button with Raise/Lower Pico Remote for Caseta Wireless Smart Lighting Dimmer Switch, PJ2-3BRL-WH-L01R, White

Feature

Pico 3-button remote control features on and off buttons, a programmable "favorite" button, as well as raise/lower
Controls Caseta Wireless dimmer and plug-in lamp dimmer
Adjust lights from anywhere in the room
Uses Clear Connect RF Technology; Lutron's highly reliable RF technology that ensures seamless communication between your Caseta Wireless products
Remote has 10-year battery life (CR2032 battery included)
Includes (1) Pico Remote; coordinating accessories sold separately

2. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Feature

Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
Built-in Post FlowWhen you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
Powerful Cutting Ability10-55 A DC output, 1/2ideal clean cut and 3/4maximum severance cut under 220/240V60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
Lightweight and PortableAllows for connection to 110- or 220-volt receptacles without toolsPortable in the shop or at the job siteat 13 lb the shoulder strap allows the end user to easily move from location to location
Added SafetyCertificated by ETLAutomatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

3. Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut

Feature

AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC) DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"; It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
SETUP WITHIN 1 MIN: The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.

4. Hypertherm Powermax45 XP Hand System w/o CPC - 20' Leads

Feature

Hypertherm Powermax45 XP Hand System w/o CPC - 20' Leads 088112

5. Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead

Feature

Auto-voltage automatically adapts to 110 V - 240 V input power. Plug adapters included.
Comes with hard carry case, eye shields, gloves, shoulder strap, standard consumables and Fine Cut consumables.
Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material.
Auto-voltage automaticvally adapts to 110 V - 240 V input power. Plug adapters included.
Comes with hard carry case, ehe shields, gloves, shoulder strap, standard consumables and FineCut consumables.
Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material.

6. Lotos LTP8000 80 A Plasma Cutter with Pilot Arc Metal Cutter 220~240V, 1 inch Clean Cut, Brown

Feature

CUT THICKNESS: Ideal Cut: 1" Inch; Maximum: 1 1/2" Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.
NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. 2T/4T ENABLED: Release your finger for long time cut THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000 Plasma Cutter are: BCON40 and BCON90. Please search "Lotos BCON40" or "BCON90"
BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
SETUP WITHIN 1 MIN: The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
PACKAGE INCLUDES: 70AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.

7. Innovative Preservation Technology for the Fresh Fruit and Vegetables

8. Model 1635 Portable 63(W) x138(L) Inch Effective Cutting CNC Machine for Plasma/Gas Cutting Equipment

Feature

Rated voltage: 110/220V10% 50/60HZ, Effective cutting range: 63"x138", Track rail size 84"x158"(X axis and Y axis)
Oxyfuel flame cutting thickness: 0.24-7.87 inches, Oxyfuel flame maximum cutting speed: 23.6 inch/min
Oxyfuel flame cutting optional gas supply type: Propane/acetylene/LPG/natural gas + oxygen
Plasma cutting thickness: matching plasma cutting equipment, Plasma cutting speed: matching current of plasma cutting equipment (Max.138 inch/min with dry&pure gas)
CNC controller default Max. speed limit: 78.7 inch/min, No-load default speed limit: 118 inch/min, Automatic Torch Height Control for Plasma Cutting

9. Uttermost Alega 7" High Crystal Spheres - Set of 2

Feature

Set of 2. Large is 7" high x 6 1/4" wide. Weighs 7 lbs. Small is 6 1/2" high x 5 1/4" wide. Weighs 6 lbs.
Alega decorative crystal spheres by Uttermost.
Use to decorate a table or accent a bookcase.
Crystal spheres catch and reflect room light.
Polished plated gold finish spiral bases. Steel construction.

10. APC-70HF, Professional 70 Amp Non-touch Pilot Arc Plasma Cutter, 1.2 inch Clean Cut, 80% Duty Cycle, 90V to 300V Wide Voltage Cutting Machine

Feature

APC-70HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
APC-70HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
APC-70HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
APC-70HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

Conclusion

By our suggestions above, we hope that you can found the best plasma cutting table system for you. Please don't forget to share your experience by comment in this post. Thank you!