There are many reasons you might choose to buy pellet stove igniter parts but it is not easy to find the best suitable pellet stove igniter parts for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best pellet stove igniter parts.
Best pellet stove igniter parts
Rank
Product Name
Score
Related posts:
Best pellet stove igniter parts reviews
1. Pellet Stove Igniter Replacement C-E-IGN Breckwell Igniter Ignitor Hot Rod Starter Element 4"
Feature
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. (840o F / 450o C) Heat Shrink used on solder joints to prevent breaking.[FITMENT] The Igniter Element is used on all Breckwell models of Pellet Stoves from 1998 to present. 250 Watts, 120V AC, 4 inches long. Also fits the Austroflamm Integra & Wega.
[REPLACE PART NUMBER] C-E-IGN Igniter. According to the manual for the Breckwell P22 Pellet stove, it calls for a C-E-IGN. This igniter work on Breckwell Big E2 sp1002.
[SPECIAFICS] 3/8 inch diameter Anti-seize Threading Easy to install and uninstall. 120 Volts 300 Watts Provide continuous sheath temperatures up to 1,200 F.
[SERVICE GURANTEE] Package include: 1Pc x C-E-IGN Pellet Stove Igniter. If it fails on your stove, feel free to contact us any time.
2. gohantee SRV7000-660-AMP Igniter Compatible with Pelpro Pellet Stove Igniter & Pleasant Hearth Pellet Stoves Ignitor Replacement Ignitors 300W
Feature
[FITMENT] SRV7000-660-AMP Igniter compatible with: PelPro PP130, PP130-B, PP60, PP60-B, PP70, PPC90 Cast Iron, TSC90 Cast Iron, Pleasant Hearth; PH35PS, PH50CABPS, PH50PS stoves.[REPLACE PART NUMBER] SRV7000-660-AMP replacement for Pelpro Pellet Stove Igniter and Pleasant Hearth Pellet Stoves Ignitor.
[SPECIAFICS] Watts: 300, Length: 4 7/8 Total, Width: 3/8", Connectors: Male Spades.
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
[SERVICE GURANTEE] Package include: 1Pc x SRV7000-660-AMP Igniter. If it fails on you stove, feel free to contact us any time.
3. gohantee 15 Fin Igniter Replacement for Harman Pellet Stoves 3-20-677200
Feature
[TROUBLESHOOTING IGNITERS] 1. Start your stove and visually look for the orange glow; 2. Physically feel around in the burn pot after the stove has been on for a few minutes to feel for heat being generated. 3.Use a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. If your Ohms reading is within 10%, more or less than the rating (46 +/- 10%).[FITMENT] This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin..works with all Harman models listed. P35i, P43, P61A, P68, Advance, Accentra, 52i, XXV, PF100, PB105.
[REPLACE PART NUMBERS] Manufacture part number: 3-20-677200 Replaces part numbers: 1-10-06620, 3-20-06783.
[TECHNICAL SPECS] Watts: 306, Length: 3.25", Width: 3/8" Rod With 1" Fins, Connectors: Male Spades.
[SERVICE GURANTEE] Package include: 1Pc x 306 Watt Igniter. If it fails on your stove, feel free to contact us any time.
4. Replacement for Quadrafire Loop Igniter Heating Element, 300 Watt Fits Many Models, Pellet Stove Ignitor SRV7000-647
Feature
FITMENT: Replacement igniter for Mt Vernon AE Pellet Stove and Insert, 300W, 120V AC.Compatible with Quadra-Fire Models: 1000 FS, 1100i, 800 F/S Nova, Classic Bay 1200, Classic Bay 1200i, Contour, Edge 60, Mt Vernon AE Insert, Mt Vernon AE, Mt Vernon E2 FS, Trekker,Trekker Insert
Tips: Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again.
It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.
1 year protection: If you have any questions during use, you can contact us via Amazon at any time.
5. Igniter for All Models of Comfortbilt/Castle Pellet Stoves
Feature
Brand New 6" Comfortbilt IgniterFor all Models of Comfortbilt Pellet Stoves
3/8 " Diameter-110 Volt
Easy Plug in
Comes with a 1 Year Warranty!
6. gohantee PU-CHA Igniter Compatible with Englander Pellet Stove Igniter, England Stove Works Igniter 300W 4.75"
Feature
[FITMENT] The England Stove Works Igniter compatible with Englander Stoves: 25-EP, 25-EPI, 25-IP, 25-PAF, 25-PAH, 25-PDV, 25-PDVC, 25-PFS, 25-PI.[REPLACE PART NUMBER] PU-CHA, PU-CHA /AMP-CIENG. 120V 9.5*123 300W Igniter replacement for England Stove Igniter.
[SPECIAFICS] 3/8 inch diameter Anti-seize Threading Easy to install and uninstall. 120 Volts 300 Watts Provide continuous sheath temperatures up to 1,200 F. Female Spades Connectors Quick Connect.
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
[SERVICE GURANTEE] Package include: 1Pc x PU-CHA Englander Igniter. If it fails on you stove, feel free to contact us any time.
7. GRILLME Replacement 15 Fin Igniter for Harman Pellet Stoves #3-20-677200
Feature
Fits Models: P35i, P43, P61A, P68, Advance, Accentra, 52i, XXV, PF100, PB105120V AC 3/8 Diameter 3 1/4 Length
Highest Quality Replacement Igniter
310 Watts, 15 Fin
1 Year Warranty
8. Hot Rod Igniter Upgrade For Breckwell King Ashley US Lopi Stoves Austroflamm
Feature
Fits Breckwell Models that use Part # C-E-IGNFits Us Stove Models that use Part # 80607 | 80619 | 80481
Fits Avalon Stove Models that use Part # 99300148 | 99300149
Fits Austoflamm Models that use Part # 109058
One Year No Hassle Warranty
9. gohantee SRV7000-462 Loop Igniter Compatible with Quadrafire Pellet Stove Eco Choice Igniter Replace 812-3811
Feature
[FITMENT] 380W Loop Igniter compatible with: Eco Choice CAB50, PS35, PS50; Quadra-Fire Castile, Castile F/S, Castile FS MBK, Contour, Mt Vernon, Mt Vernon E2i, Santa Fe, Santa Fe B.[REPLACE PART NUMBER] Part#: SRV7000-462, Replaces old Quadra-Fire part# SRV7000-226, 7001-226, and 7000-020 igniter replacement for Eco Choice stoves and Quadra-Fire stoves igniters.
[SPECIAFICS] Single Element Listing, 380 Watts, 120V AC, Element: 3/4 inches Wide x 4 3/8 inches in Length x 1/4 inches Diameter Rod. Wires are thermally protected and are 18 inches in length with male connectors.
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
[SERVICE GURANTEE] Package include: 1Pc x SRV7000-462 Igniter. If it fails on you stove, feel free to contact us any time.
10. England Stove Works Englander Stove & Grill Igniter Upgrade PU-CHA
Feature
Fits Englander Models: 25-EP & 25-EPI (Evolution Pellet) 25-IP (Imperial Pellet) 25-IPM 25-IPS 25-PAH (Pellet Auxiliary Heater) 25-PDV 25-PDVC 25-PDVP 25-PI 55-SHP10 55-SHP10L 55-SHP15 55-SHP20 55-SHP22 55-SHP22L 55-SHPAH 55-SHPAHL 55-SHPEP & 55-SHPEPI 55-SHPEPL & 55-SHPEPIL 55-SHPIP 55-SHPIPL 55-SHPIPM 55-SHPIPS 55-TRP10 55-TRP15 55-TRP20 55-TRP22 55-TRPAH 55-TRPEP & 55-TRPEPI 55-TRPIP 55-TRPIPM 55-TRPIPS American Heritage American Standard US 25-5670Fits Grill Models: Englander ( 21-PG100) Summers Heat (51-SHPG100) Timber Ridge (51-TRPG100)
3/8 Diameter x 4 3/4 Length.
300W, 120V.
One Year No Hassle Warranty
