What are criterias of the best motion sensors light switch? It is not easy to find the answer. We spent many hours to analyst top 10 motion sensors light switch and find the best one for you. Let’s find more detail below.
Best motion sensors light switch
Rank
Product Name
Score
Related posts:
Best motion sensors light switch reviews
1. Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White
Feature
Motion Sensor Switch automatically turns lights ON and OFFDetects fine motion 2-3 times better than competition with up to 900 square feet of coverage
Easily replaces existing switches in all homes - no neutral required and simple button press setup
Works with all bulb types: 250 Watt incandescent, halogen, ELV; 200 Watt MLV; 150 Watt LED/CFL; 2 amp ballasts
This single-pole switch is recommended for smaller rooms such as kitches, closets, and laundry rooms
Coordinating Wall Plate sold seperately (CW-1-WH)
Description
The Collection creates convenience, style, and comfort for every room in your home. Set the perfect mood for entertaining, dining, and relaxing, while experiencing the energy savings and Lamp life extension that Lutron dimmers can provide Maestro products are specifically designed to control many different light sources including: incandescent, halogen, new fluorescent, magnetic low voltage transformers, and electronic low voltage transformers to meet all of your needs.2. TOPGREENER TDOS5-W-2PCS Motion Detector Sensor Light Switch, Occupancy Vacancy Modes, 4A, 500W 1/8HP, Wall Plates Included, Neutral Wire Required, TDOS5, White, (Pack of 2)
Feature
Automatically detects motion from passive infrared sensors to turn lights on and off based on room occupancy and vacancySensor switch with passive infrared detection (PIR): detects infrared to reduce false triggers from unwanted movements
Variable time delay from 15 sec (Test) to 30 min. Adjustable range
Auto ON/OFF, Manual ON/Auto OFF; After install and turning on circuit breaker, allow about 2 minutes to warm up before operating the device
NEUTRAL WIRE REQUIRED, 1,200 square feet coverage, High range motion detector with 180 Degree View; 500W Incandescent, Halogen, Fluorescent, LED, CFL, Works with all bulb types. Single Pole Only. 2 wall plates included (8831-W)
Description
TOPGREENER TDOS5 combines occupancy and vacancy sensor into one light switch for energy efficiency, security and convenience, while in compliance with the 2011 NEC Code. When no motion is detected within delay time you set, the connected load will turn off automatically. This light sensor switch detects fine motion. Energy Efficiency: The motion sensor light switch automatically turns ON/OFF based on room occupancy, avoiding the waste of energy from leaving the lights/motors on when nobody is in the room, including bathroom, closet, hallway, and office. Running the TDOS5 consumes little power, est. cost only $1 a year. The sensor light switch automatically turns the light on to avoid blind-searching and tripping when entering a dark room. Enhances safety and security: Occupancy sensor switch can also effectively deter thieves and allow security cameras to capture clear footage. To conserve energy and prevent lights from automatically turning on during day time, all you need to do is adjust the light level knob to change the light sensitivity of the sensor. Operating modes: Occupancy Mode: Light switch sensor will automatically turn on the lights when you enter a room and automatically turn off after the room is vacant, making it especially convenient when entering a room with your hands full. Perfect for many applications such as the kitchen, laundry room, garage, restroom, office, closet, etc. Vacancy Mode: Requires manually turning the light on and automatically turns the light off when the room is vacant. Vacancy mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. Vacancy mode provides the most energy savings as it ensures that the lights will automatically turn off when the room is no longer occupied. NEUTRAL WIRE REQUIRED3. TOPGREENER Motion Sensor Light Switch, PIR Sensor Switch, Occupancy Sensor Light Switch, Motion Sensor Wall Switch, 500W 1/8HP, Neutral Wire Required, Single Pole, TDOS5, White
Feature
Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a roomMotion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
Light switch sensor features adjustable settings. Variable time delay from 15 sec (Test) to 30 min. Adjustable range
NEUTRAL WIRE REQUIRED, 1,200 square feet coverage, 180 Degree View; 120VAC, 500W Incandescent, Halogen, Fluorescent, LED, CFL, Works with all bulb types. Single Pole Only. Wall plate included
Description
TOPGREENER TDOS5 combines occupancy and vacancy sensor into one light switch for energy efficiency, security and convenience, while in compliance with the 2011 NEC Code. When no motion is detected within delay time you set, the connected load will turn off automatically. This light sensor switch detects fine motion. Energy Efficiency: The motion sensor light switch automatically turns ON/OFF based on room occupancy, avoiding the waste of energy from leaving the lights/motors on when nobody is in the room, including bathroom, closet, hallway, and office. Running the TDOS5 consumes little power, est. cost only $1 a year. The sensor light switch automatically turns the light on to avoid blind-searching and tripping when entering a dark room. Enhances safety and security: Occupancy sensor switch can also effectively deter thieves and allow security cameras to capture clear footage. To conserve energy and prevent lights from automatically turning on during day time, all you need to do is adjust the light level knob to change the light sensitivity of the sensor. Operating modes: Occupancy Mode: Light switch sensor will automatically turn on the lights when you enter a room and automatically turn off after the room is vacant, making it especially convenient when entering a room with your hands full. Perfect for many applications such as the kitchen, laundry room, garage, restroom, office, closet, etc. Vacancy Mode: Requires manually turning the light on and automatically turns the light off when the room is vacant. Vacancy mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. Vacancy mode provides the most energy savings as it ensures that the lights will automatically turn off when the room is no longer occupied. NEUTRAL WIRE REQUIRED4. Leviton IPS02-1LW Decora Motion Sensor In-Wall Switch, Auto-On, 2.5A, Single Pole, White
Feature
Automatic ON/Automatic OFF provides 180-Degree field of view and 900 square feet of coverage300W Incandescent / Halogen, 150W LED / CFL, 200VA Fluorescent, 1/6HP Motor loads
Fits in standard wallbox and replaces single-pole wall switch, no Neutral wire required for installation but ground wire is required
Five-year limited warranty
Description
Leviton IPS02-1LW 300-Watt Incandescent, 150-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole, White. Compatible with Decora screwless snap-on wallplates (sold separately).5. Lutron MS-OPS5M-WH Maestro Sensor switch, 5A, No Neutral Required, Single-Pole or Multi-Location MS-OPS5MH-WH, White
Feature
Automatically turn lights on and off based on room occupancyUses Advanced XCT sensing technology, offering the most reliable on/off performance with up to 900 square feet coverage
Works with all bulb types
Up to 600 W incandescent, halogen, electronic low voltage; 450 W magnetic low voltage; 360 W CFL/ LED, 5 amp ballasts; 3 amp fans
Requires ground wire
6. TOPGREENER PIR Passive Infrared Motion Sensor Switch, No Neutral Required, 4A 500W 1/8HP, 120-277VAC, Occupancy Vacancy, Ground Wire Required, Single Pole, TDOS5-J, White, 2-Pack
Feature
Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a roomMotion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
Motion sensor wall switch has universal wiring design with interchangeable hot and load wires makes installation easier
Occupancy sensor mode (Auto ON, Auto OFF) and vacancy sensor mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs; fixed time delays: 15 sec (Test), 5 min, 10 min, 20 min, 30 min; adjustable range
Neutral wire not required, ground wire required for installation; 1200 square feet coverage area, 180-degree field of view; 120-277VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor; operating temperature (32 131F); single pole only; 2x wall plates included; CA Title 20 & 24 compliant; UL listed; 1-year warranty
7. TOPGREENER in-Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, 4A, 500W, Single Pole, Neutral Wire Required, TSOS5-W, White, 2 Pack
Feature
2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a roomAUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
Max Sensor Coverage Area 707 sq ft, 180 Field of View. Adjustable range and sensitivity from 30% to 100%
Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
*PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*
8. (Pack of 10) White Motion Sensor Light Switch Neutral Wire Required Single Pole Only (Not 3-Way) for Indoor Use Vacancy & Occupancy Modes Title 24, UL Certified Adjustable Timer
Feature
NEUTRAL WIRE REQUIRED: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. We recommend consulting with a licensed electrician prior to purchase to ensure proper installation and compatibility.SAVE ON ELECTRICITY BILLS: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.
ADJUSTABLE SENSITIVITY WITH WIDE FIELD OF VIEW: The motion sensor covers 180, so all motion is detected. Theres no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights wont switch off at inconvenient times.
100% MONEY BACK GUARANTEE: We stand behind the quality and utility of this light switch. If you arent completely satisfied with it, for any reason at all, simply send it back to us for a full refund no hassles, no delays and no questions asked.
FULLY CERTIFIED AND COMPLIANT: UL Certified, FCC Listed and California Title 24 Compliant.
9. ELEGRP Occupancy Sensor Light Switch, PIR Infrared Motion Activated Wall Switch, No Neutral Wire, Single Pole for CFL/LED/Incandescent Bulb, Wall Plate Included, UL Listed (1 Pack, Matte White)
Feature
Easy to install No neutral wire required Grounding Wire is Required for Function - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.Universal Compatibility Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
Modern Design Exquisite matte finish and frameless design looks best with todays decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
Multiple Control Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home.
High Quality Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.
10. ECOELER Single Pole or 3 Way Motion Sensor Light Switch, Multi-Dual Sensing Switch for Indoor Use
Feature
NEUTRAL WIRE REQUIRED: This motion sensor switch need neutral wire. Please review your wiring setup prior to purchase.Single Pole or 3-Way available. If you need 3-way function, you need to connect all 5 wires. If you do not need 3-way function, please do not connect the blue wire, just connect other 4 wires. Lights will flash if not correctly connected. If you have any doubt, please consult with a licensed electrician.
3-WAY SWITCH: This motion sensor occupancy switch is a 3-way switch allowing the lights to turn on from multiple switch locations in the room.
The motion sensor covers 180, so all motion is detected. Light switch sensor features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.
Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy modes manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights and fans accidentally left on all day.
