Top micro jig tapering jig for 2021

Finding the best micro jig tapering jig suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best micro jig tapering jig

Related posts:

Best micro jig tapering jig reviews

1. GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

Feature

Protect hands and prevent kickback like never before
Powerful high-friction durable grip for extreme hold
Precision cutting and control down to 1/4" Ripping
Fully adjustable for easy handling
Work with small stock safely on the table saw, Router table, Jointer, & Band saw
Made in USA. A true MICROJIG Innovation.
Extended 3-Year . 100% Satisfaction .
3-Directional Force for total control of the workpiece
Moving-Blade-Guard Hand protection
Precise 1/4" thin rips
Virtually eliminates kickback
Work with small stock safely

2. Gripper(TM) Deluxe Package - 2 pack

Feature

Includes; 2 GR-100 GRR-Rippers
Precision woodworking hand pushing tool with adjustable/detachable components
Utilizes multiple grooved non-slip pads for strong gripping & holding power
Pushes & holds the work piece as the saw blade passes through either right or left tunnel
The handle, center leg & balance support are all fully adjustable

3. Thin Rip Tablesaw Jig

Feature

Sold on Amazon

4. Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Feature

Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.

5. GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG

Feature

GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
Precise 1/4" thin rips
Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
Made in the USA. A true MICROJIG Innovation.:

6. MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)

Feature

Precision taper cuts as accurate as 1/8 of a degree
Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Push block
Infinite taper adjustments between 0 and 10 degrees
Two independent Memory Locks keeps angles for repeat taper cuts
Full instructional DVD and bonus project plans included

7. Micro Jig SG-133 MATCHFIT Setup Gauge by MICROJIG. Dado Stop Accessory

Feature

Even faster setup and additional accuracy for cutting dados with matchfit dado stop.
Set the precise blade kerf with your own personal template that exactly matches your table saw kerf.
Setup gauge also allows you to square your inlay material and set the exact width of the dado cut.
No need for multiple test cuts, no cumbersome measuring, and no tricky setups
Convenient Router bit template lets you set the exact 3/8 depth for dovetail Clamp grooves

8. DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

Feature

NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw; Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately; Easily taper table legs or use for construction and remodeling
VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts; The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs)
ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper; Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper
EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw
CONTENTS: Package includes (1) pair of jig legs, (1) scale, (1) locking bracket, (1) work stop, (1) handle, assembly hardware, and assembly instructions; Wood and saw required, not included

9. GRR-RIPPER 3D Pushblock with MICRODIAL Tapering Jig

Feature

3-Directional Force for Unmatched Control of the Work piece
Moving-Blade-Guard Hand Protection
Precise 1/4" Thin Rips
Precision taper cuts as accurate as 1/8 of a degree
Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Pushblock
Infinite taper adjustments between 0 and 10 degrees

10. GRR-RIPPER 3D Pushblock with Miter Bars, Gravity Heel, Tapering Jig and Upgrade Kit

Feature

3-Directional Force for Unmatched Control of the Work piece
Hassle-free miter bars using One-Touch Calibration
Upgrade your GRR-RIPPER to GRR-RIPPER Advanced!
GRR-RIPPER Gravity Heel Accessory is a fully adjustable heel with auto-retracting technology for reducing blowout.
Precision taper cuts as accurate as 1/8 of a degree

Conclusion

By our suggestions above, we hope that you can found the best micro jig tapering jig for you. Please don't forget to share your experience by comment in this post. Thank you!