10 best heat gun for crafts for 2021

It’s not that easy to choose the right heat gun for crafts since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top heat gun for crafts on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best heat gun for crafts on the marketbut dont skip to the end!

Best heat gun for crafts

Related posts:

Best heat gun for crafts reviews

1. SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122~120250- 650with Overload Protection for Crafts, Shrinking PVC, Stripping Paint

Feature

A Great Item to Have in Your Tool Set--Seekone heat gun have a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders, It's also a professional safe tool that can keep working over 1200 hours, the overload protection design can protect the heat gun from damage by high temperature.
Strong Power With 2 Modes--1800W Seekone heat gun provide strong power to heat up to 1202(650) quickly.2 modes: I:50-450,190-210L/min; II:50-650, 250-500L/min
4 Nozzles Attached--Spoon reflector nozzle for shrinking heat shrink tube; Cone nozzle for Welding, shrink sleeving ; Fish tail surface nozzle for drying, thawing ; BBQ lighter for light the coal and so on; with ventilation slots, heat dissipation design can cooling down the motor during working to extend the using life
Easy to Use & Widely Practicality--The lightweight handle design is suitable for the use of different habits, and it can be used for stripping paint, lighting charcoal, soldering pipes, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing Guarantee
100% Satisfaction Guarantee--Full refund & return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact with us, we will be always here for you

Description

Seekone -A Professional team on Amazon, which deals with development of the tools. We commit ourselves to provide customers with qualitative tools

Specification
Model: Heat gun SDL-828
Output:1800W
Input:110V, 50Hz
Size:248mm*192mm
Weight:0.9kg (1.984lb)
Plug Type:USAv Temperature:50- 650(122 ~ 1202)
Blast Capacity:250-500L/mini

Four Nozzle Attachments
1 x Large Deflector Nozzle
1 x Reduction Nozzle
1 x Small Deflector Nozzle
1 x Reflector Nozzle

Attention:
1.Don't place the heat gun aside when it's switch started.
2.Don't use as a hair dryer and keep away from children.
3.Don't drirect the heat toward human or animal.
4.Don't use the heat gun alongside plammable or gas.
5.Don't plock or cover the hot air outlet,don't insert anything inside the nozzle.
6.Don't touch the nozzle when the heat gun when it use or just after use.
7.Don't use it in the rian or wet place, to avoid the danger of electric shock.
8.Please wear eye protection equipment when removing plaint in high altitude.
9.Please romove the paint or other residues from the nozzle and blade after use it, which may cause a fire.
10.Plase Keep the working area well ventilated,based peices and residues are highly toxic substances.

Package Included:
1 x Heat Gun
4 x Nozzles
1 x User Manual

2. Homidic 6.56FT Long Heat Gun, Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp

Feature

Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200 in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
Warm Tips:The temp of the nozzle could reach to 200in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

Description

Features:

100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical

Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness

There are heat vents in left and right sides to decreased the internal temp and extend its lifetime

This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun

The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously

Specification:

Material: Plastic ABS+PC

Cable length: 6.56FT /180 cm

Working temp.: About 200

Rated Power: 300W

Rated voltage:110v

Power: 50-60Hz

Working time: 8 minutes

Power type: AC power supply

Type: Constant temperature

Attention:

-Do not touch with water! Do not touch the hot nozzle.

-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm.

-Do not use more than 10 minutes continuously to prevent overheated.

-This hot air gun is specially made for DIY, it can't not use in industry aspect

Package includes:

1 x Hot Air Gun

3. Heat Gun Dual Temperature Settings, PRULDE N2190 1500W Hot Air Gun 800F - 1112F, Overload Protection with 4 Metal Nozzle Attachments for Shrink Wrapping/Tubing, Paint Removal

Feature

1500W motor can provide strong power to heat up to 1100 quickly, 2 settings temperature settings for easy operation
Built-in overload protection shuts the heating element down and prevents burn up
This gun comes with an integrated support stand to provide greater stability and prevents tip over
With 4pcs different accessory for different application needs, purpose heat gun for shrink wrapping, stripping paint, thawing pipes, loosening floor tiles, shrink tubing, and much more
Excellent professional grade copper DC motor with high efficiency and long life

Description

NEU MASTER N2190 1500W Heat Gun is a professional power tools and the uses for a heat gun are practically endless, especially a strong one like this at 1500W. It can be used to strip paint, heat-shrink tubing, shrink film, dry out damp wood, bend and weld plastic, soften adhesives and thaw frozen pipes WHERE TO USE - It can be used to strip paint, heat-shrink tubing, shrink film, dry out damp wood, bend and weld plastic, soften adhesives and thaw frozen pipes SECURITY - Overheating Protection The built-in overheating protection design makes your heat gun safer, and more reliable HOME TOOL - Remove all packing materials, remove remaining packaging and transit supports(if existing), check the completeness of the packing content, check the appliance, the power cord, the power plug and all accessories DESIGN - 2 settings temperature settings for easy operation dial :800F 300L/M :1100F 500L/M , the heat gun can meet different applications PACKAGE CONTENT LIST -With 4pcs different accessory for different application needsPurpose gun for stripping paint, thawing pipes, loosening floor tiles and much more, these are the extras that should always come with a heat gun SPECIFICATION - Watts: 1500 W Voltage: 120 V Temperature & Air Flow Setting: 800F 300L/M Setting: 1100F 500L/M Power Cord: 2M cable with UL plug

4. Wagner Spraytech 0503008 HT1000 Heat Gun, 2 Temp Settings 750F & 1000F, soften paint, caulking, adhesive, putty for removal, shrink wrap, bend plastic pipes, and loosen rusted nuts or bolts

Feature

This product is manufactured in china
This product is a power heat guns
This product is manufactured in china
1,200-watt heat gun, manufactured in and imported from China
General purpose gun for stripping paint, thawing pipes, loosening floor tiles
2 temperature settings (750 and 1,000 degrees F) for defrosting freezers or loosening rusted bolts
1,200-watt heat gun, manufactured in and imported from China
General purpose gun for stripping paint, thawing pipes, loosening floor tiles
2 temperature settings (750 and 1,000 degrees F) for defrosting freezers or loosening rusted bolts
4,100 Btu output for removing multiple layers of paint
Measures 16.5 by 9.8 by 17 inches; Weighs 1.9 pounds; two-year warranty

Description

The Ht1000 is a general purpose heat gun that is suitable for many heating applications ranging from removing paint and old flooring, bending plastics, loosening rusted bolts, or thawing frozen pipes. It produces 1200 watts and 4100 btus of power with temperature settings of 750 degree f or 1000 degree f. The Ht1000 is ideal for diyers, homeowners, handymen or part-time contractors. Download manual buy parts.

5. ZeopoCase Mini Heat Gun, Portable Mini Handheld Hot Air Gun for DIY Embossing Shrink Wrapping Drying Paint, 300W Multi Function Electrical Heat Tool

Feature

Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed
Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
The temprature can not be adjusted, but it can reach at about 200C/390F within a few seconds abstractly which heat up quickly and works like a charm
WHAT YOU GET - 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.

Description

This excellent compact electrical heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun

FEATURE:
Size: 220*43mm / 8.7*1.7inchs, wire length 91cm/36inchs
Type: Constant temperature
Working temperature: It can reach at about 200C / 390F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz

Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.

Packing details:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap

Product Warranty
[QUALITY ASSURANCE] ZeopoCase offer 12 month warranty time for the product.

If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.

6. Chandler Tool Embossing Heat Gun - 300 Watt - Dual-Temperature Professional Heat Tool - for Embossing Shrink Wrapping Paint Drying Crafts Electronics DIY (Blue)

Feature

Burning your job or blowing powder everywhere? Low Speed/Heat setting for detail work!
Need more power? High Speed/Heat setting gets big jobs done quick!
Too hot to hold? Insulated body for comfortable extended use!
Beware of unsafe heat guns! UL-safety certified for North American use
Don't like buying junk? Neither do we. American brand & lifetime warranty

Description

WHY SHOULD I BUY THE CHANDLER TOOL CTHG150D Embossing Heat Gun?

If the Chandler Tool embossing heat gun looks different than others, that's because it IS different. The ONLY embossing heat gun with TWO temperature settings for maximum versatility. High heat (300/572) for big jobs. Low heat (200/392) for detail work. All packaged in a compact insulated body for comfortable prolonged use, the CTHG150D is perfect for a variety of crafting projects such as embossing, shrink wrap, paint & lacquer drying & paint removal, as well as many electronics projects!

QUALITY

Do you like throwing away tools & buying new ones? We don't. That's why we build ours to last. With a body made from top-quality impact-resistant plastic and an all-metal precision heating element, this just might be the last heat gun you buy

SAFETY

A defective heat gun is both an electrical hazard and a fire hazard! Beware CE-certified (Europe-only) & non-certified (yikes!) heat guns. UL-certification is the North-American safety standard. UL certification is very expensive & manufacturers are proud to display it, so if a product doesn't say "UL Certified" you can be sure it's not. Unlike most embossing heat guns sold online, the Chandler Tool CTHG150D Dual-Temp Embossing Heat Gun is fully UL-certified

WHO IS CHANDLER TOOL?

Born out of frustration with low-quality throw-away tools, Chandler Tool was founded with a single purpose: to create high quality tools that last a lifetime. Though many of our products are produced overseas, we are an American company, building tools to American standards for American customers. Buy with confidence. We stand by our products with American customer service and a lifetime warranty

LIFETIME WARRANTY

If our products ever fail to live up to your expectations, we will make it right. All of our products carry a lifetime warranty against defects in materials or workmanship

7. AMENKER Heat Gun 6.6ft Cable Dual-Temperature 300W Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp Heat Tools, Black, Small (MF300)

Feature

Dual-Temperature HEAT GUN: Dual Temperature (0-200-300). 6.5ft Cable Hot Gun is We specialize in designing DIY hot air fan for American customers. Mini Heat Gun Electric110V 300W 200C/300C Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools
SAFETY HOT GUN: The temperature control device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire. The body is made of ABS which has some functions such as heat resistance, low temperature resistance and so on; Outlet is made of stainless
6.6FT CABLE AND METAL BRACKET: UL safety certified extra long cable, you can use it flexibly in the 6.6ft range. Stainless steel bracket can whirl about 100 degree and it can stand on the table safely; The left and right sides have a heat sink which can reduce th internal temperature and prolong the service life.
EASY TO USE: It is very easy to use it. Just keep about 3-5cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it; The temprature can not be adjusted, but it can reach at about 200C/300C in few seconds which heat up quickly and works like a charm.
WHAT YOU GET: 1pcs 300W Hot Air Gun, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.

8. DIY Heat Gun 6.6ft Cable 300W Dual-Temperature Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools

Feature

Upgrade Dual-Temperature HEAT GUNDual Temperature (OFF-200-300). 6.5ft Cable Hot Gun is We specialize in designing DIY hot air fan for American customers. Mini Heat Gun Electric110V 300W 200C / 300C Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools
SAFETY HOT GUNThe temperature control device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire. The body is made of ABS which has some functions such as heat resistance, low temperature resistance and so on; Outlet is made of stainless
EAUTIFUL DESIGNStainless steel bracket can whirl about 100 degree and it can stand on the table safely; The left and right sides have a heat sink which can reduce th internal temperature and prolong the service life
EASY TO USE It is very easy to use it. Just keep about 3-5cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it; The temprature can not be adjusted, but it can reach at about 200C / 300C in few seconds which heat up quickly and works like a charm.
WHAT YOU GET 1pcs 300W Hot Air Gun, 1pcs Detailed Instructions, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.

9. Heat Gun, PRULDE HG0080 Dual Temperature Hot Air Gun Kit with 4 Nozzle Attachments for Crafts, Shrink Wrapping, Shrink Tubing, Paint Removing

Feature

EASY TO USE-- Lightweight and compact heat guns is only 1.3 LB .Integrated hands free support stand allows heat gun sit upright for easy use.
SAFE & DURABLE-- Hot air gun built-in overheating protection ensures safe and reliable use. Equipped with a flexible tube and special handle design to prevent damage and reduce fatigue during use.
WIDE APPLICATION-- This heat gun with 4 nozzles attachment ideal for bending pipes, lighting Charcoal, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and moulding plastics as well as drying and thawing purpose.
DUAL TEMPERATURE CONTROL-- Find the perfect heat setting for your project needs by switching between the two temperature settings. The heat blower gun offers a low 752F and high 1112F setting.
FRIENDLY CUSTOMER SERVICE-- Full quick refund or new replacement service. We always be here for after-sale customer service.

10. Bubble Removing Tool for Epoxy Resin and Acrylic Art, DIY Glitter Tumblers, Specially-Designed Heat Gun for Making Acrylic Resin Travel Mugs Tumblers to Remove Air Bubbles (Pink)

Feature

Our special designed heat gun is 5x quicker than hair dryers to remove air bubbles from the epoxy paint, it also makes epoxy distribute more evenly, allowing your artwork to look smooth and neat.
The built-in stainless steel stand allows you to free your hands while drying the mug simply open the retractable stand and turn on the heat gun, the drying process now becomes so easy.
The CNC technology helps it heats up in seconds and quickly gets hot temperature up to 200C/390F. Please DO NOT make it work more than 8 minutes at a time, also please DO NOT get it too close to the object.
The heat gun is made of high-quality ABS plastic and stainless steel that make the whole product simple, portable and durable.
Please contact us if you have any question, our U.S based customer service team is here for you.

Conclusion

All above are our suggestions for heat gun for crafts. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using heat gun for crafts with us by comment in this post. Thank you!