It’s not that easy to choose the right dashboard mounting pad for suction cup since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top dashboard mounting pad for suction cup on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best dashboard mounting pad for suction cup on the marketbut dont skip to the end!
Best dashboard mounting pad for suction cup
Rank
Product Name
Score
Related posts:
Best dashboard mounting pad for suction cup reviews
1. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder - 2 Pack
Feature
Smooth Surface Mount Disc - To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction MountStrong Sticky 3M PE Foam Pad - 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
Universal Compatibility - Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
Size: about 70 mm in diameter
Note: Each pad is one-time use only. Once removed, it may not be reusable.
Description
Universal CompatibilityAbout 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can't be reapplied.
Package
2 * 70mm Adhesive Mounting Disk
2. Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
Feature
Semi permanent adhesive mounting disc works with any 80mm windshield suction mounting pedestal for adhering to dashboardsCompatible with Garmin and TomTom GPS mounting pedestals.Note that the disc is meant to be a bit larger than the mount to ensure a secure fit
2 year limited warranty
Description
The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your cars dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the cars dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.3. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Feature
To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.3M PE foam adhesive at the bottom can be fixed on textured surfaces.
Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
No tools required for installation.
Buy with confidence as every APPS2Car product comes with one-year warranty.
Description
Universal CompatibilityThis 3M Adhesive Dashboard Pad is compatible with all APPS2Car Dashboard Suction Cup Mounts for smartphones, and Garmin, TomTom GPS mounting pedestals.
Dashboard Pad Mounting Instructions
1. Choose the location you would like to apply the disk and clean the dashboard surface area thoroughly to remove any dust or debris. Allow the area to dry completely before applying the mounting disk.
2. Remove the paper cover from the dashboard pad.
3. Stick the pad on the cleaned dash surface, and rub firmly over surface to ensure a strong adhesive grip. And remove the protective film.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting pad and lower the securing lever.
Note:
* Do not place the mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
** Let the adhesive set for 3 hours before installing suction cup mount. (It's the best to let it set for overnight.)
*** Each pad is one-time use only. Once removed, it can not be reapplied.
4. Randconcept Dashboard Pad Mounting Disk for Suction Cup Phone Mount & Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 2.76" Wide 70mm Diameter 2 Pcs
Feature
WIDE COMPATIBILITY: Adhesive mounting disk fits any suction cup style or accessories mounting within 70mm in diameter suction cup for adhering to dashboards in the market. Our sticky disc is flexible option for carmount sticky pad replacement!MOUNTING WITH SMOOTH & FLAT SURFACE: Thanks for PVC plate and 3M adhesive, upper part PVC plate provides smooth and flat surface while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface!
NO MORE ADHESIVE SEPARATED: The bottom grey color PE foam adhesive is enhanced version comparing with white adhesive in the market. It performs well even in hot and cold weather or climates.
SAFE JOURNEY: After suction cup firmly attached with our sticky pad, you can enjoy navigation with smartphone or garmin GPS devices even camera securely on dashboard. No more dropping phone holders or garmin accessories for gps during driving.
100% RISK-FREE PURCHASE: At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art adhsive disc, we take all the right steps to make sure you get the finest. We're so confident that you'll love our sticky pads that we offer a 100% Customer Satisfaction Warranty so that you know you're getting exactly what you pay for!
Description
Making Driving Safer & More Convenient With Randconcept Sticky Pads
Randconcept dashboard pad sticks to Dashboard with high quality sticky gel to get your car phone mount suitable for more smooth or even textured surfaces, since it will help change the mounting surface to the completely flat surface where the suction cup of mount would have the best performance.
Installation:
1) Clean the dashboard;
2) Remove the protective cover on the base of the disk;
3) Press the disk to the dashboard and leave more than 30 seconds;
4) Attach suction mount on the disc.
Features Youll Love:
Your phone holder or garmin gps mount will firmly attached to car dashboard no matter how many bumps you hit
Now you can change your suction cup to new location with our sticky disc, even from windshield to dashboard.
Enjoy stafety driving without dropping suction phone holder or gps mount again!
Package Includes:
Alcohol Pad x2
Installation guide x1
3M adhesivesticky Plate x2
Note:
Please note that each pad is one-time use only. Once removed, it may not be reapplied.
Please clean the your suction cup with running water and let it air dry before attach to the sticky plate surface.
Click on the Add To Cart button now to Order Today and make traveling safer and easier with Randconcept Sticky Pads
5. Lots Off 3 Pack of 3.15" (80mm) Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc(Compatible with Garmin Nuvi Magellan GPS & iPhone Smartphone Mount)
Feature
Scope of application: Suction cup bracket for GPS navigator, driving recorder and early warning instrumentProduct material: main body ABS, back glue is 3M PE FOAM, disc diameter is 80mm, 3M adhesive diameter is 69mm, thickness: 3.99mm.
The center console base has good initial tack and holding viscosity, good stability, and good adhesion to plastic, rubber and rough surfaces.
Good adhesion at high and low temperatures, high temperature +80 C to low temperature -20 C does not affect the use of the product;
The product is upgraded, and a protective film is added to prevent the disc from being scratched; after the disc is pasted with a protective film on the back, each is packed in a PE bag.
Description
Tips:1.The bonding surface should be kept absolutely clean and dry. It can be scrubbed with alcohol or acetone. The surface after cleaning can be completely evaporated after the solvent is completely evaporated. It can also be baked with a baking gun or a hair drye.
2.Hard to avoid contact between the finger and the rubber surface during the operation. After pressing, press hard to ensure sufficient contact and wetting of the rubber surface.
6. WOLEYI 3-Pack 8CM Adhesive Mounting Disk, Car Dashboard Sticky Pad for Suction Cup Mount
Feature
Sticky 3M disc fits any suction cup mount within 3.15inch in diameter for adhering to dashboards.Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
Sticky adhesive mounting disc support your suction mount or smartphone & camera securely on dashboard.
3 packed with 1-year warranty.Removable from surface by applying heat (e.g. hair dryer).
Easy Installation: 1) Clean the dashboard; 2) Remove the protective cover on the base of the disk; 3) Press the disk to the dashboard and leave more than 30 secondds; 4) Attach suction mount on the disc
Description
Woleyi 8CM Adhesive Mounting Disk (3 Pack)Features:
1. Sticky 3M disc fits any suction cup mount within 3.15inch in diameter for adhering to dashboards.
2. Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
3. Sticky adhesive mounting disc support your suction mount or smartphone & camera securely on dashboard.
4. 3 packed with 1-year warranty.
5. Easy Installation: 1) Clean the dashboard; 2) Remove the protective cover on the base of the disk; 3) Press the disk to the dashboard and leave more than 30 secondds; 4) Attach suction mount on the disc
Warranty and After-Sale Service
All WOLEYI products with 40-day money back and 1-year warranty,if there is any problem with our products,ensure our satisfactory user experience for you,please contact us in your convenience,we shall be pleased to survice you,and will reply you within 12h after we received your feedback.
7. Lock Sucker Suction Cup Hook Dashboard Car Mount Mounting Super Strong Adhesive Pads 6CM and 8CM Can Use for Xiaoyi Camera
Feature
1.WHERE TO USE? Your sucker is not strong enough and fall off often? Try MeetRade super adhesive for lock sucker. Never fall again!2.MATERIAL:3M VHB super strong adhesive, it can help suction cup installs on not totally flat surfaces.
3.SIZE: Diameter lengthen out to 60MM (2.4INCH) and 80MM(3.15INCH)!
4.EASY TO CLEAN: When you no longer need it, just gently buckle it down and slowly pull it up. The MeetRade adhesive is easily removable and do not leave a residue.
5.MULTI-PURPOSE ADHESIVE: MeetRade adhesive provide the best solution for your lock sucker hook, car mount and so on.
Description
Adhesive Mounting DiskAdhesive Pads Round Sticky Suction Tab Perfect for Mounting Lock Sucker Suction Cup Hook
Dashboard Adhesive Extra Strength FOR Car Mount Super Strong Double Adhesive
It's always a good to have Double sided adhesive pads like these around the home because these adhesive disks can come in handy for all kinds of things, whether it's for suction cups, a GPS in your car or a toothbrush holder, these suction cup replacements can help lot and let the job easy!
Work on both FLAT and EVEN surface, Super strong adhesive.
Best value Pack: Include 5 pcs 60MM (2.4INCH) + 5PCS 80MM(3.15INCH) Total 10 Pack.
No Worry service; Any problem please contact us first, quality issues will 100% refund.
8. iOttie Adhesive Dashboard Pad for Car Mounts Dashboard Pad
Feature
Sticks to Dashboard with high quality semi-permanent acrylic tapeAcrylic Tape sticks to almost all textured and curved surfaces
Compatible with all iOttie Dashboard Mounts for smartphones
We strongly recommend using a Dashboard Pad to prevent possible damage that may occur if you apply suction cup directly to your dash
This is a semi-permanent solution; each pad is one-time use only. Once removed, it may not be reusable
Description
iOttie mounts are well-known for their unique Resuable Dashboard Pad. We now offer our optional but highly recommended accessory by itself for purchase. You can now have additional Resuable Dashboard Pad for improved mounting on textured or curved surfaces for your one touch mounts. Having additional Resuable Dashboard Pads gives our users more mounting location options than ever before. The Resuable Dashboard Pad can be easily attached and removed numerous times and does not leave any sticky residue behind. When the grip is losing its power, simply rinse and massage the Resuable Dashboard Pad under warm water and it will be restored back to its original condition.9. MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
Feature
What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.Usewidely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Perfect for Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.
CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
Strong Adhesive and not leave a residueStrong adhesive is strong yet leaves no residue when removal is required.
These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Description
Package include:4 pieces Double Side Sticker Pad.Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
10. VANMASS Dashboard Pad Mounting Disk for Suction Cup Phone Mount Stand Cradle GPS Suction Mount Sat Nav Dash Cam Holder Stick on Flat Dash Mount Pad with Sticky Gel Adhesive 3.2in Diameter (2 Pcs)
Feature
VANMASS dashboard pad sticks to Dashboard with high quality sticky gel to get your car phone mount suitable for more smooth or even textured surfaces, since it will help change the mounting surface to the completely flat surface where the suction cup of mount would have the best performance.This dash pad requires a flat surface but not necessarily a smooth surface.
We do NOT recommend to use this dashboard pad on leather, wall or filmed glass surfaces since the pad is designed with strong viscosity.
Compatible with all VANMASS Dashboard Mounts or any suction cup style mount with diameter less than 3 inch.
This is a semi-permanent solution. Each pad is one-time use only. Once removed, it may not be reapplied.
