Top bryant humidifier solenoid for 2020

Finding the best bryant humidifier solenoid suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best bryant humidifier solenoid

Related posts:

Best bryant humidifier solenoid reviews

1. Eagleggo Humidifier Water Valve for Aprilaire 4040 Solenoid Valve 24 Volt Humidifier Models 400, 500, 600, 700, Part No. B2015-S85

Feature

The 4040 by Eagleggo is a replacement humidifier solenoid valve.
For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.

Description

About:
The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.

Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.

Does not work on models 330, 445, 110, 112, 350 and 360.

For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz

2. Aprilaire 4040 Solenoid Valve, 24 Volt for Aprilaire Whole House Humidifier Models 400, 400M, 500, 500M, 600, 600M, 558, 550A, 550, 568, 560A, 560, 700, 700M, 768, 760A, 760

Feature

Genuine Aprilaire humidifier replacement part
Made in Madison, wi, usa
Ensures that the right amount of humidity is delivered into your home
Controls how much moisture enters your humidifier, making it possible to maintain proper humidity levels throughout your home
Compatible with all Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360

Description

Proper humidification of your home is important for protecting your familys health and the beauty of your home. The 4040 24 Volt solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid Valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.

3. Humidifier Valve 4040 Solenoid Valve Brass Air Valve Compatible with Aprilaire Fit for 400 500 600 700 Humidifier 24 Volt

Feature

Application: the 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360
Function: the humidifier solenoid valve can control how much moisture enters into your humidifier to make it possible to maintain proper humidity levels throughout your home
Replace numbers: 332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3
Easy to apply: the installation of the solenoid valve is very easy, just using a screwdriver and wrench can accomplish and it only takes few minutes to install it
Durable material: the humidifier is made of durable brass material and copper wires, which can serve for long time usage, you can apply it for a long period

Description

Features:

Application:
The 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360.

Replace numbers:
332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3.

Installation steps:
Step 1: disconnect the humidifier: shut off the water supply to the unit.
Step 2: remove the solenoid: unclip the wires from the solenoid, using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube, then let any remaining water drain into the plastic container, disconnect the water supply, use a screwdriver to unscrew the screws and discard the old solenoid.
Step 3: install the solenoid: align the new solenoid and then tighten the screws, then connect the water supply line, replace the distributor tube and tighten the compression nut, finally connect the wires to the solenoid.
Step 4: reconnect the humidifier.

Specification:
Material: brass and copper wire
Model number: 4040
Watts: 2.3
Orifice: 3/ 64
Volt: 24/ 60V
MOPO: 125

Package quantity:
1 x 4040 Solenoid valve

Note:
All the brand names and models mentioned are not applied as trade marks, just work as product adaptability.

4. Mudder B2015-S85 B2017-S85 4040 Solenoid Valve Humidifier Valve Compatible with Aprilaire Humidifier 220 224 400 440 500 550 558 560 600 700 24 Volt 2.3 Watts 60 Hz

Feature

Application model: the B2015-S85/ B2017-S85 solenoid valve is comparable to model 4040, compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360
Function introduction: the humidifier solenoid valve controls how much moisture enters the humidifier, enabling it to maintain proper humidity levels throughout your home
Humidifier valve features: applicable voltage is 24 volts, the power is 2.3 watts, frequency is 14 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers
Easy to install: the installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes, please note that our products do not include the installation tool
Durable material: the humidifier valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time; Note: please check the relevant size information carefully before purchasing

Description

Note:
The brand we mentioned is only to illustrate the suitability of the product, not as a trademark.

Wide application:
The solenoid valve is compatible with Aprilaire models, such as 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360.

Installation steps:
Firstly, disconnect the humidifier and shut off the water supply to the unit.
Secondly, remove the solenoid. Unclip the wires from the solenoid. Using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube. Let remaining water drain into the plastic container. Disconnect the water supply. Use a screwdriver to unscrew the screws and discard the old.
Thirdly, install the solenoid. Align the new solenoid and then tighten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut.
Finally, connect the wires to the solenoid and reconnect the humidifier.

Specification:
Model No.: B2015-S85/ B2017-S85
Watts: 2.3 watts
PSI: 125
Volt: 24 V
Orifice: 3/32 inch, 1/4 inch
Material: brass and copper wire

Package includes:
1 x Humidifier valve

5. Bryant / Carrier # EF18LJ241 Solenoid Valve

6. 4040 Humidifier Valve for Aprilaire Solenoid Valve, 24 Volt Humidifier Models 400, 500, 600, 700, Part No. B2015-S85

Feature

4040 replacement humidifier
For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
Comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Do not work on models 330, 445, 110, 112, 350, 360.
Perfect Shopping Experience: We stand by our words, if our product fails to deliver on what you expect of it simply return it and we will issue full refundno questions asked.

7. 4040 Solenoid Valve, Compatible with Aprilaire Humidifier Solenoid Valve 400, 500, 600, 700, Replaces B2015-S85 B2017-S85, | 24 Volts | 2.3 Watts | 60 HZ

Feature

[ HIGH QUALITY ]--The humidifier valve replacement for 4040 Blue Solenoid Valve. Comes with compression nut, washer, and strainer. The solenoid valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time.
[ FITS MODELS ] -- The 4040solenoid valve is compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768. Does not work on models 330, 445, 110, 112, 350 and 360.
[ SOLENOID VALVE FEATURES ] -- Applicable voltage is 24 volts, the power is 2.3 watts, frequency is 60 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers.
[ EASY TO INSTALL ] -- The installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes.
[ AFTER-SALES GUARANTEE ] -- 100% refund guarantee - any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked.

8. AMI PARTS 4040 Humidifier Solenoid Valve Replacement Part, 24V,Brass Made Humidifier Solenoid Valve,Replaces Models 400,500,600,700,600M, 558, 550A, 550, 568, 560A, 560, 700, 700M, 768, 760A, 760

Feature

Parts Model:This 4040 solenoid valve controls water flow to the humidifier to ensure proper humidity is delivered creating a more comfortable living environment. | 24 volts | 2.3 Watts | 60 Hz
Replace Numbers:A2012-S118,B2035-S2,B2035-S5,B2035-S54,B2035-S55,B2015-S51,B2015-S54,B2015-S58,B2015-S65,B2015-S68, B2015-S85,B2015-S87.This humidifier valve solenoid compatible with Aprilaire humidifier models 400, 500, 600 and 700 series
Premium Replacement Parts:The replacement part is made from durable high quality material and well-tested by the manufacturer. The quality is the same as the OEM standard. The design has been improved to have higher durability and stability
Easy to Install:This humidifier solenoid valve is very simple to replace. You only need to use a screwdriver and a wrench to complete, installation takes only a few minutes
Quick Response:If you have any questions during use and compatibility.please send us an email and we will give you a satisfactory answer immediately

9. Humidifier Water Solenoid Valve by AMI PARTS-4040 Replacement Humidifier Valve-24V 2.3W-B2015-S85 B2017-S85 220 224 400 400A-Blue

Feature

PARTS NUMBER: AMI PARTS 4040 Blue Solenoid Valve Replacement for Humidifier 24V 2.3W, B2017-S85.
FITS MODELS: 220, 224, 400M, 440, 500, 500A, 400, 400A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
SPECS: The humidifier valve includes compression nut, washer and inline strainer, 60HZ
QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part.
CONTACT US: If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the AMI PARTS storefront.

10. A2012-S150 Solenoid Valve Humidifier Replacement Valve Compatible with Aprilaire 110, 112, 220, 224, 350, 360, 440 Replace for B2035-S2 B2035-S5 B2035-S54, 24 V, 60 Hz AC, 125 PSI

Feature

Compatible with: the A2012-S150 solenoid valve is compatible with Aprilaire of many models, such as 110, 112, 220, 224, 350, 360, 440, 550, 550A, 550-A, 558, 560, 560A, 560-A, 568, 600, 700, 760, 760A, 760-A, and 768, a practical product for you
Replacement part number: this humidifier valve can replace part number of A2012-S118, B2035-S2, B2035-S5, B2035-S54, B2035-S55, B2015-S51, B2015-S54, B2015-S58, B2015-S65, B2015-S68, B2015-S85 and B2015-S87
Product function: the humidifier solenoid valve can control the amount of moisture that enters into your humidifier, making it possible to maintain proper humidity levels throughout your home, the voltage is 24 V, the frequency is 50/ 60 Hz and the pressure is 125 PSI
Easy to install: firstly, disconnect the humidifier, secondly, remove the old solenoid, then, install the new solenoid, finally, reconnect the humidifier, installing only need a screwdriver and wrench, taking just some minutes to finish 4 easy steps
Material: this solenoid valve is made of brass material and copper wires, durable and sturdy, providing a long service time

Conclusion

All above are our suggestions for bryant humidifier solenoid. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using bryant humidifier solenoid with us by comment in this post. Thank you!