Best arduino mega ethernet shield w5500 for 2020

What are criterias of the best arduino mega ethernet shield w5500? It is not easy to find the answer. We spent many hours to analyst top 10 arduino mega ethernet shield w5500 and find the best one for you. Let’s find more detail below.

Best arduino mega ethernet shield w5500

Related posts:

Best arduino mega ethernet shield w5500 reviews

1. HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

Feature

The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver.
SCM system can be completed within a file MicroSD card .Support Micro SD Card, Micro SDHC card (high speed card).
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply.
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.

Description

Description:
The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver,
SCM system can be completed within a file MicroSD card
Support Micro SD Card, Micro SDHC card (high speed card)
Level conversion circuit board that can interface level is 5V or 3.3V
Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
Communications interface is a standard SPI interface
4 M2 screws positioning holes for easy installation
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
VCC is the power supply, MISO, MOSI, SCK for SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply;
Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal;
Micro SD card connector: self bomb deck, easy card insertion.
Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.

Package Included:
5* Micro SD TF Card Adater Reader Module

2. SunFounder Ethernet Shield W5100 for Arduino R3 Mega 2560 1280 A057

Feature

With this Ethernet Shield, your Arduino board can be used to connect to internet.
Can be used as server or client.
Directly plug puzzle board, no soldering required.
It is directly supported by Arduino official Ethernet Library.
It adds a micro-SD card slot, which can be used to store files for serving over the network.

Description

Features
1.With this Ethernet Shield, your Arduino board can be used to connect to internet.
2.Can be used as server or client.
3.Directly plug puzzle board, no soldering required.
4.Controller: w5100.
5.This is the latest version of the Ethernet Shield.
6.This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
7.It is directly supported by Arduino official Ethernet Library.
8.It adds a micro-SD card slot, which can be used to store files for serving over the network.
9.It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
10.The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
11.It supports up to four simultaneous socket connections.
12.Use the Ethernet library to write sketches which connect to the internet using the shield.
13.Fits all version of arduino Main board,2009,UNO, mega 1280, mega 2560.
14.Size:7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.

Package Included
1 x Ethernet Shield

3. XCSOURCE ATmega2560-16AU ATMEGA16U2 Board + Ethernet Shield W5100 Network Expansion TE168

Feature

The Mega 2560 is an update for the Arduino Mega, which it replaces.
The board is a microcontroller board based on the ATmega2560-16AU .
It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

Description

ATmega2560-16AU 2012 Version Board

Specifications:
Microcontroller: ATmega2560
Clock Speed: 16MHz
EEPROM: 4KB
SRAM: 8KB
Flash Memory: 256KB of which 8KB used by bootloader
Operating Voltage: 5V
Input Voltage: 7-12V
Analog Input Pins:16
Digital I/O Pins: 54 (of which 14 provide PWM output)
DC Current for 3.3V Pin: 50mA
DC Current per I/O Pin: 40mA

Ethernet Shield W5100 For Arduino Main Board 2015 UNO ATMega 328 1280 MEGA2560

Specifications:
With this Ethernet Shield, your Arduino board can be used to connect to internet.
Can be used as server or client.
Directly plug puzzle board, no soldering required.
Controller: W5100.
This is the latest version of the Ethernet Shield.
This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
It is directly supported by Arduino official Ethernet Library.
It adds a micro-SD card slot, which can be used to store files for serving over the network.
It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
It supports up to four simultaneous socket connections.
Use the Ethernet library to write sketches which connect to the internet using the shield.
Fits all version of arduino Main board, 2015, UNO, mega 1280, mega 2560.
Size: 7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.
MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac = 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xE

Package Included:
1x ATmega2560-16AU 2012 Version Board
1x Ethernet Shield W5100 For Arduino Main Board 2015 UNO ATMega 328 1280 MEGA2560
1x USB Cable

4. Arduino Ethernet Shield 2 [A000024]

Feature

Expansion shield to bring your Arduino board online with simple-yet-reliable communication libraries, supporting TCP and UDP protocols.
Rich collection of examples: browse the Internet, make a tiny web server, and send data to a cloud with little coding effort.
Use its micro-SD card slot to store sensor information, serve files to 8 simultaneously connected devices, or log traffic.
Stackable: other shields can be stacked on top of it adding new functionalities to your projects.
No extra power needed, gets it from your Arduino board. It is true plug and play!

5. KEYESTUDIO Mega 2560 R3 Board for Arduino Projects with USB Cable

Feature

PERFECTLY COMPATIBLE with IDE Software: a nice upgrade to the r3 controller which will allow more complex programs and projects to be done
RIGHT OUT OF THE Box: uses the official ATmega16u2 IC instead of CH340G, no driver problem
EXCELLENT QUALITY: The build quality is good with straight headers and good soldering. It comes with instructions on downloading and installing a driver on Windows machines. They are well packed in a nice box.
FCC and CE CERTIFICATION: this board is made from environmental friendly components and materials, as well as user friendly production technology. It's a great prototyping tool for electronic project.
We also have a one-stop store that provides various of open source hardware raspberry pi and micro bit, you can access this page at https://www.amazon.com/keyestudio

6. seeed studio W5500 Ethernet Shield

Feature

The shield also have two grove connectors and a microsd card socket to support projects which require storing large amounts of data from grove sensor.
The rj45 port (where the ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.
Led outputs (full/half duplex, link, speed, active).10baset/100basetx ethernet phy embedded.supports power down mode.supports hardwired tcp/ip protocols : tcp, udp, icmp, ipv4, arp, igmp, pppoe
Supports wake on lan over udp.supports 8 independent sockets simultaneously.internal 32kbytes memory for tx/rx buffers
Supports high speed serial peripheral interface(spi mode 0, 3).supports auto negotiation (full and half duplex, 10 and 100* based )

7. RobotDyn - Nano V3 Ethernet Network Shield - ENC28J60 Module for use with Arduino Nano, Nano v3 Ethernet Shield for Arduino Nano (ENC28J60), Nano v3 Ethernet Shield for Arduino Ethernet Shield

Feature

FOR ARDUINO IDE: Use the Ethernet library EtherCard.h to write sketches which connect to the internet using the add-on module
ETHERNET NANO SHIELD: allows you to connect the Arduino Nano to a network. It is assembled with long stackable pin headers, and dont need to solder the headers separately.
THE ETHERNET NANO SHIELD: is based on the ENC28J60 Ethernet chip which provide a network (IP) stack capable of both TCP and UDP.
NANO ETHERNET SHIELD SPECS: Ethernet Bandwidth 10Base-T PHY Yes Interrupt Pin 1Ethernet Ports 1 RJ45 Ethernet protocol TCP/IP MAC Yes TX/RX RAM Buffer(Bytes) 8Kb Max Speed (MHz) 25MHz Power In 5V.
COMPATIBLE WITH ARDUINO NANO: ThisEthernet Nano Shieldallows you to connect the Arduino Nano to anetwork. It is assembled with long stackable pin headers, and dont need to solderthe headers separately.

8. KEYESTUDIO W5500 Ethernet Shield (Without Poe)+USB Cable for Arduino R3 Controller Board Micro SD Shield

Feature

It's a controller R3 Board with a built in Wiznet 5500 ethernet module, contains everything you need, does not to work with another Arduinos
You can quickly make your controller access to internet to build your network application.
Onboard comes with W5500 network module,which can make Arduino as simple Web server or read Arduino digital and analog interface application via network control.
It can achieve a simple Web server through using Ethernet libraries in IDE, meanwhile, support MicroSD card (TF card) read and write, really with powerful functions.
Main ChipATMEGA328 microcontroller; external power7-12v(9v recommended); digital input/output pins: 14of which 6 pins support PWM

9. Arduino YUN REV2 [ABX00020]

Feature

Easy out-of-the-box configuration process through WiFi or Ethernet via the boards Web Panel: scan your existing networks and select where your board will connect to from a drop-down list
The two processors on the Arduino Yn rev 2 work together thanks to Arduinos Bridge library allowing communication in both directions
Host your own websites on the board to control physical peripherals from a browser on any external device
You can pipe requests from the Arduino part of the board all the way to various Internet services
Configure shield related features and change the Arduino software Over-The-Air through the Yn Web Panel

10. RobotDyn - Mega ETH with PoE - Mega 2560 Ethernet W5500 + Micro SD Card Reader/Writer with PoE, Compatible for Arduino. Arduino Mega Ethernet Shield w5500 (Active PoE).

Feature

BUILD A NETWORK CONNECTED DEVICE: Your Arduino Mega 2560 board can be used to connect to internet with this RobotDyn Ethernet Shield w5500. It Comes with LAN and Wi-Fi connection. The best premium alternative for Arduino Ethernet shield Mega and Ethernet controller W5500 and with Wi-Fi module ESP-01!
ARDUINO MEGA 2560 R3 FORM-FACTOR: Programming in Arduino IDE: RobotDyn MEGA 2560 ETH R3 can be programmed via an Arduino IDE. Select Arduino Mega 2560 in the Boards menu, and use Ethernet3 / Ethernet4 library.
PORTS AND INTERFACES: RobotDyn MEGA 2560 ETH R3 has 70 input/output ports, 12 of which can be used for PWM, and 16 analog ports with 10-bits resolution (0 1023). The board is equipped with an RJ45, micro USB, DC power jack, and a reset button.
W5500 ETHERNET SHIELD : WizNet W5500 is a TCP/IP embedded LAN Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MAC and PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega2560.For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes. ESP-01 Wi-Fi On board have socket for connecting Wi-Fi ESP-01 module. Wi-Fi module connecting to Serial3interfaceviaRX3(D15)/TX3(
MICRO SD CARD READER/WRITER WITH POE: The Ethernet shield w5500 board also features a Micro SD card socket. The micro SD card can be used to save and store the data, which can later be transferred over the network. The Ethernet controller and microSD card are connected through the SPI bus.

Conclusion

All above are our suggestions for arduino mega ethernet shield w5500. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using arduino mega ethernet shield w5500 with us by comment in this post. Thank you!