Finding the best arduino mega enclosure suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best arduino mega enclosure
Rank
Product Name
Score
Related posts:
Best arduino mega enclosure reviews
1. SunFounder Mega 2560 Case Enclosure Transparent Gloss Acrylic Computer Box Compatible with Arduino Mega 2560 Rev3 R3, Genuino Mega 2560 Rev3
Feature
Protective case of Mega 2560.Fastened by eight screws.
Made by premium acrylic.
Provides excellent protection, and fashionable appearance.
Unique design for Mega 2560 with pin leakage, which provides easy connection to other components.
Description
IntroductionThis product is protective case of SunFounder Mega 2560, fastened by eight screws. It is made by high grade acrylic, which provides excellent protection and vogue appearance. It is designed for the Mega 2560 board with slot for pins, eanbling easy connection to other components.
Note:
1.This product is only a protective case for Mega 2560, not including a Mega board.
2.It's suitable for Arduino Mega 2560 Rev3, Genuino Mega 2560 Rev3, SunFounder Mega 2560 and other Arduino boards compatible with Mega.
3.It may not be suitable for the latest Arduino Mega 2560 of arduino.org.
4.If you are not sure whether this case is suitable for your Mega 2560 or not, just check the reset button's position on your board. If it's located near the USB port, then the case can be applied to your board.
Package Includes
1 x Mega 2560 Acrylic Case
2. Arduino Project Enclosure
Feature
allows you to easily enclose your Arduino main board, Arduino Mega, or some of the other board that fits the Arduino foot printHas room internally for an Arduino and a shield
Has a snap-in compartment in the back for accessing switches or connections or battery access.
Description
Description: The Arduino enclosure allows you to easily enclose your Arduino main board, Arduino Mega, or some of the other board that fits the Arduino foot print. It simply presses shut, so you donTMt have to worry about screws or fasteners.
It has room internally for an Arduino and a shield. It even has a removable tab mated for use with an Ethernet shield. It also has a snap-in compartment in the back for accessing switches or connections or battery access.
Dimensions: 87x64x28mm
3. CODINGARRAY R3 Case Enclosure Transparent Clear Computer Box Compatible for Arduino MEGA2560
Feature
This is a transparent acrylic board case compatible with Mega2560 R3This can prevent the mega2560 from scratching or causing a shock
Designed to provide easy access to the pinheaders of Mega
An opaque acrylic protective film is attached to prevent scratches. You can see the clear acrylic by opening the film
The package includes an acrylic case x 1, M2 bolts, nuts, and washers dedicated to MEGA2560
Description
This is a transparent acrylic case dedicated to the Mega2560. It is also compatible with Uno R3.This can prevent a dent in the MEGA2560 or a shock.
An opaque acrylic protective film is attached to prevent scratches.
You can see the clear acrylic by opening the film.
Note:
Mega2560 is not included.
Component listing:
1pcs MEGA2560 acrylic case
5pcs M2*16 bolts
7pcs M2*8 bolts
12pcs M2 nut
7pcs M2 washer
2T(acrylic)
2pcs Zipperback
4. sb components Arduino Mega Case Enclosure New Clear Transparent Computer Box with Switch
Feature
This is a no-nonsense protective case designed specifically for the Arduino Mega 2560 R3.The case is a two-piece injection-molded ABS enclosure that snaps together around the Arduino. Holds the Arduino firmly in place
It provides tough protection for the Arduino while providing access to all Arduino connectors. It also includes an integrated power switch for the Arduino.
Integrated on/off switch
Access to all Arduino Mega R3 connectors.
Description
Compatible with Arduino model this 2-piece case snaps together easily. Its semi-transparent polymer provides tough colorful protection for your Arduino.5. 3ple Decker Case for Arduino(High,Clear)
Feature
Enclosure is compatible with Arduino UNO, Arduino Leonardo,Genuino UNO,Genuino 101.Compact and Provides excellent protection.
Japan Domestic genuine product.
Access to all Arduino connectors.
Description
Product DescriptionIn order to protect your beloved Arduino , this is the perfect light
weight accessory with unique functionalities designed specifically for the Arduino.
Our elegant case is compatible with Arduino UNO,
Arduino Leonardo,Genuino UNO,Genuino 101.
Excellent detachability between modules that can stack in multiple stages.
Using 3ple Decker series, you can create an integrated system by stacking
the microcomputer board module and various modules by performing simple
wiring and programming.
Seven color variations among them black and white are flame retardant,
all other transparent colors are non-flame retardant.
Air vents allow cool air to flow over the surface of the board, and exit
through the top of the case. This case has GPIO cover which will Protects your Arduino while leaving you
access to all ports and GPIO headers,which will also protect the board from short
circuit. Without GPIO cover,freely can do electrical work.
Contents
Enclosure for Arduino (High,Clear)
Arduino board adapter (attached to the case)
Rubber feet(it prevents the case from slipping while working) ,screws & nuts,pins for stacking
Upper opening lid 2 types (one is already attached)
6. SB Components Arduino Mega Case Enclosure New Blue Transparent Computer Box with Switch
Feature
This is a no-nonsense protective case designed specifically for the Arduino Mega 2560 R3.The case is a two-piece injection-molded ABS enclosure that snaps together around the Arduino. Holds the Arduino firmly in place
It provides tough protection for the Arduino while providing access to all Arduino connectors. It also includes an integrated power switch for the Arduino.
Integrated on/off switch
Access to all Arduino Mega R3 connectors.
Description
Compatible with Arduino model this 2-piece case snaps together easily. Its semi-transparent polymer provides tough colorful protection for your Arduino.7. SunFounder RAB Holder for Arduino Raspberry Pi Breadboard Holder 5 in 1 Base Plate with Rubber Feet for Arduino R3 Mega 2560, Raspberry Pi 3B+ 3B 2 Model B 1 Model B and 400 800 Points Breadboard
Feature
WIDE-RANGE COMPATIBLITY- This holder is compatible with the Arduino Uno, Mega2560 and Raspberry Pi 3/2/B+ as well as working with both 400- and 830-hole breadboards.SUPERIORLY DESIGNED SLOTS- The slots are specially designed for TF cards, HDMI and USB cords to be inserted without hindering the power connection.
WELL-CRAFTED DESIGN- The RAB Holder has a customized, sleek design that is attractive and is more comfortable to touch while working with it.
DYNAMIC PORTABILITY- Able to be easily moved, carried, and fixed on a flat table for working and creating experiments.
AFFORDABLE PRICE- The holder is available for a cost-efficient price that is the best in the industry for the best quality.
Description
Arduino Raspberry Pi Holder BreadboardTAGLINE
Well-crafted and sleek companion to any Raspberry Pi and Arduino device.
OVERVIEW
The RAB Holder is a superior holder for Arduino and Raspberry Pi hobbyists to make experiments and save the results conveniently.
DESCRIPTION
For kids and adults who are interested in building and learning Raspberry Pi devices - the SunFounder RAB Holder is the best holder to fix Arduino and Raspberry Pi boards on one surface - simplifying the circuit building process and creating a fun memorable experience.
WARRANTY
Free Returns: 30-day by default at Amazon
Free Replacement: 90 Days
Free Repair: 12 Months
Warranty Exceptions: man-made error-caused and intentional damage are not warranted
SPECIFICATIONS
Item Dimensions: 20*13.5*0.5 mm
Package Dimensions: 22*16*1mm
Item Weight: 95g
Package Weight: 103g
PACKAGE INCLUDES
2x M3*10 Screw
4x M2.5*6 Screw
6x M3*6 Screw
1x RAB Holder
1x Screwdriver
8. duinoCase-ADK - Quality Metal Enclosure for Arduino MEGA ADK
Feature
Made in the USACustom design for the Arduino Mega ADK
Removable Front & Rear Panels | Optional DIN Rail mount kit
Commercial | Military | 18 Gauge Steel
Semi-Gloss Textured Coating
Description
The duinoCase-ADK is designed to hold a standard Arduino Mega ADK board, and one shield. With the new enclosure design, both the front and rear panels are removable. There is a front panel with knock-outs specifically designed for the Ethernet Shield to allow for easy adding of Ethernet communications. The base is slotted for wall mounting, and is predrilled for our optional DIN Rail mounting kit. Includes stick-on rubber feet, case and board mounting screws. The enclosure is made from common 18 gauge cold rolled A366/1008 mild steel, with a semi-gloss textured "Arduino Green" coating. Dimensions of the enclosure are (approx.) 4.1" L x 2.5" W x 1.75" H9. SB Components Arduino Mega Case Enclosure New Black Computer Box with Switch
Feature
This is a no-nonsense protective case designed specifically for the Arduino Mega 2560 R3.The case is a two-piece injection-molded ABS enclosure that snaps together around the Arduino. Holds the Arduino firmly in place
It provides tough protection for the Arduino while providing access to all Arduino connectors. It also includes an integrated power switch for the Arduino.
Integrated on/off switch
Access to all Arduino Mega R3 connectors.
Description
Compatible with Arduino model this 2-piece case snaps together easily. Its semi-transparent polymer provides tough colorful protection for your Arduino.10. duinoCase-Mega - Quality Metal Enclosure for Arduino Mega 2560
Feature
Made in the USACustom design for the Arduino Mega 2560
Removable Front & Rear Panels | Optional DIN Rail mount kit
Commercial | Military | 18 Gauge Steel
Semi-Gloss Textured Coating
