alignment tool wheel buyer’s guide

All in all, we spent hundreds of hours combing through thousands of user reviews to put together a comprehensive list of the best alignment tool wheel on the market. We then delved into these alignment tool wheel further and put together detailed reviews so that you can easily pick the best alignment tool wheel for your needs.

Best alignment tool wheel

Related posts:

Best alignment tool wheel reviews

1. KIPA Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tool For Truck Car

Feature

Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment
Wheel Alignment tool
Universial Automotive Tool For Wheel Alignment
Auto Car Truck Magnetic Gauge Tool Alignment tool
Magnetic Alignment Camber Castor Gauge

Description

This is An adjustable equipment allows you to return the strut to the original camber position
after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
In-Kind Shooting

Specification:
Measures the Camber and Caster angle on the wheel hub or brake disc
Suitable for accurate checking of the castor and camber angle
Has a simple leveling adjustment from -5 degrees to 5 degrees
Magnetic gauge attaches to the hub or disc brake
Allows adjustment to maintain correct wheel alignment and even tyre wear
Time and money saving device
Easy to read and convenient to operate

Simple Instruction:

How to use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Simple Reminder:
If you need very detailed adjustment instruction, You may search "wheel alignment tool" on youtube. There are some video

2. SAVEMORE4U18 Car 14.5''/368mm Steering Wheel Holder Stand Tool Wheel Alignment Essential Tool

Feature

To make measurement more accurate.
By pressing the locking switch can adjust the height
This rack is a simple but must have tool for aligning a vehicle, it has a loaded spring to fit a wide variety of cars, trucks etc.
Material: Iron, Plastic
Width: 155MM/6.1'' ; Height: 368MM/14.5''

Description

Package Included:

1 x Alignment Rack Car Truck Van Steering Wheel Holder Stand(Not including the wheels)
Notice:

1.Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.

2.The color may have different as the difference display,pls understand.

3. Front End Alignment Steering Wheel Holder Tool

Description

The steering wheel level is a sturdy and simple tool used to assure a level steering wheel during a front-end alignment procedure The tool is easily attached to the steering wheel at the beginning of the alignment procedure It is spring-loaded for automatic centering and self-retaining

4. Tenhulzen Auto 3300 2-Wheel Alignment System All-in-one Tool (Camber/Caster/Toe Plates)

Feature

Perfect all-in-one tool for car and SUV front end alignments
Patent Pending wheel stand-offs provide unparalleled accuracy
Camber measurements accurate to within 0.1 degrees
Degree toe alignment specs (commonly supplied by OEM's) can be used with the attached degree to inch conversion chart
Detailed, step by step video Instructions

Description

The Tenhulzen Automotive 2-Wheel Alignment System allows you to easily and accurately measure an axle's toe, camber, and caster.

Perfect for:
Aligning a vehicle after replacing suspension components (tie rods, etc.)
Making camber/toe alignment changes in your garage, at the track, etc.
Adjusting alignment to you personal desired specifications
Checking alignment after going off track, hitting a pothole, etc.
Saving money!!!


Toe Measurement - Instead of leaning against the tire like other brands, the patent pending stand-offs contact the wheel rim itself, enabling extremely accurate measurements. The tape measures have 1/32nd inch divisions (twice the resolution of other brands).
Camber Measurement - The digital readout is accurate to within 0.1 degrees, and the gauge can be calibrated for non-level surfaces in a matter of seconds.
Caster Measurement - Instead of requiring expensive turn plates to measure caster (like other brands), our product has turn plate functionality built in, making this a true all-in-one package!
Storage - The plates and tape measures snap together into one unit, making the package easy to store and carry, without the need for a separate case or bag.


Includes:
One 2-wheel plate with integrated camber gauge
One standard 2-wheel plate
2 High Resolution Tape Measures
Tenhulzen Automotive Digital Readout
Degrees Conversion Chart
Video Instructions (written instructions also available for download)
Factory support (usually available 7 days a week, great for weekend projects!

What one reviewer said: "The alignment system works as advertised. I had only observed one alignment in the past with different equipment. This equipment was easy to use with the online instruction videos."

5. Motion Pro Wheel Alignment Tool 080368

Go to amazon.com

Feature

Designed to help set rear wheel alignment
Fast, accurate and easy to use
Eliminates the need to use a tape measure
Allows for proper wheel alignment which extends chain/sprocket and belt life

Description

Designed to help set rear wheel alignment Fast, accurate and easy to use Eliminates the need to use a tape measure Allows for proper wheel alignment which extends chain/sprocket and belt life

6. OEMTOOLS 24233 Wheel Stud Alignment Pin, 8 Piece

Go to amazon.com

Feature

Sizes included: 12 mm x 1.5, 12 mm x 1.25, 14 mm x 1.25 and 14 mm x 1.50
Application: Mercedes, BMW, Audi, VW, Porsche, Fiat and Dodge
Color coded for easy identification
Each stud is marked with the thread size
Comes in a sturdy blow mold case

Description

Many of today's vehicles no longer use wheel studs to secure the wheel to the vehicle. Installing wheels on vehicles that use wheel bolts instead of studs can be a challenge. OEMTOOLS 8 piece wheel stud alignment pins make that job faster and easier to perform by allowing the Tech to safely position the wheel prior to installing the wheel bolts.

7. Motion Pro 08-0048 Chain Alignment Tool

Go to amazon.com

Feature

Quick and accurate alignment
Tool body clamps squarely to rear sprocket so the alignment rod will indicate sprocket alignment to chain
Motion Pro Chain Alignment Tool can be used on motorcycles and ATVs
Made in the China

Description

Motion Pro chain alignment tool takes the guesswork out of aligning your bike's chain and sprocket. Chain alignment just does not get any easier.

8. Wheel-Alignment-Toe-In-Toe-Out-Gauge

Go to amazon.com

Feature

Check wheel alignment in minutes
This tool measures toe-out and toe-in on a simple to read gauge
Reads wheel wobble
Maximum distance from outside of tire to outside of other tire must be less than 81"

Description

Check wheel alignment in minutes This tool measures toe-out and toe-in on a simple to read gauge Reads wheel wobble Maximum distance from outside of tire to outside of other tire must be less than 81" Easy to use

9. Zackman Scientific Wheel Alignment Rack Tool for Camber Caster Gauge Adapter Rim Clamp Mount Mounting Clamp

Go to amazon.com

Feature

Wheel Alignment Tool with Universal Adapter Plate for Magnetic Camber Guages
Mounts onto 11" to 25" Rims on the Rim's edge
Adjustable and Reversible Hunger Style Rim Locating Pins
Stainless Steel Adapter Plate
Heavy Duty Slider Rods

Description

This Wheel Alignment Tool can be used on aluminum and steel wheels, and mounts to 11" to 25" rim edges with adjustable and reversible hunter style rim locating pins. The wheel alignment tool comes inclusive with a universal adapter plate to mount to any magnetic camber gauges.

10. Black Wheel Hanger Alignment Pin Guide Tool - Metric 14x1.5 Threads - Wheel Lug Bolt Automotive Mechanic Tool Compatible with European Cars (Audi VW Volkswagen Mercedes Benz) M14x1.5

Go to amazon.com

Feature

[BENEFITS] This wheel bolt pilot pin guide tool makes it easier for you to mount wheels and tires by lining up the lug holes to the hub so you don't have to worry about balancing the wheels between your knees as you're trying to bolt them up to your car.
[MANUFACTURING] Made of heat treated Grade 10.9 carbon steel for strength so you only need to use one and it is also zinc coated to resist corrosion, rust, and oxidation.
[FITMENT] Compatible with most factory and aftermarket wheels for BMW, Audi, Volkswagen, Mercedes, Porsche, and other European vehicles as long as it has 14x1.5 metric threads. Check description for a sample list.
[SPECIFICATIONS] Includes 1 Tool with Metric 14x1.5 (M14x1.5) thread Size. 160mm (6.25") overall length (See Diagram for details). Be sure to check your vehicle's bolt thread before purchasing, as there are several sizes on the market.
[WARRANTY] 1 year warranty against manufacturer defects and follows Amazon standards for returns.

Description

Compatible With:
Works on any vehicle with 14x1.5 Thread Pitch (Audi, Mercedes, Porsche, Volkswagen)

Audi
1999-2019 TT
1998-2019 A3
1996-2019 A4
1992-2019 S4
1995-2018 A6
1995-2018 S6
1997-2019 A8
2001-2018 S8
1989-1994 100
2011-2020 A1
1998-2019 A3
2016-2018 A7
2018-2020 Q2
2013-2020 Q3
2009-2019 Q5
2007-2019 Q7
2008-2019 R8
2017-2019 RS3
2000-2008 RS4
2011-2019 RS5
2003-2010 RS6
2014-2018 RS7
2000-2019 S3
2008-2019 S5
2013-2018 S7
2012-2020 SQ5

Volkswagen
1985-2019 Beetle
1992-2009 EuroVan
2007-2016 Eos
1999-2019 Golf
2006-2019 GTI
2000-2019 Jetta
2007-2009 Jetta City
1998-2020 Passat
2006-2009 Rabbit
2009-2019 Tiguan

Porsche
1997-2016 Boxster
2003-2019 Cayenne
2006-2016 Cayman
1999-2020 911
2010-2019 Panamera
2015-2019 Macan


Important Notes
- This item does not work on ALL Audi, Mercedes, Porsche, Volkswagen vehicles because certain years / models / trims use different threaded bolts.
- If you are not sure of your vehicle's lug bolt size, please send us an Amazon message with the year/make/model. Click the "European Motor Werke" link under the delivery options. Click the "Ask a Question" button. Please be sure to include the ASIN of this item in your message.

Installation Instructions
1) Screw it into one of your lug holes at or near the 12 o'clock position
2) Put your wheel on. The wheel hanger will go through one of your wheel's lug holes
3) Tighten your wheels using your other lug bolts
4) Take the wheel hanger off
5) Install the last lug bolt
6) Torque the lug bolts in a star pattern using factory torque specs

Conclusion

By our suggestions above, we hope that you can found the best alignment tool wheel for you. Please don't forget to share your experience by comment in this post. Thank you!