10 best trigger wireless

When you looking for trigger wireless, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable trigger wireless is not an easy task. In this post, we show you how to find the right trigger wireless along with our top-rated reviews. Please check out our suggestions to find the best trigger wireless for you.

Best trigger wireless

Related posts:

Best trigger wireless reviews

1. Trigger 2100 Wireless Accessory Controller 4-Switch Relay System

Feature

Accepts 12-24 volt input
Two 10 amp Fused circuits w/12-24 volt output
Two 30 amp Fused circuits w/12-24 volt output
Wireless back-lit RF remote switch Module

Description

The TRIGGER wireless accessory controller substantially saves installation time of your electronic accessories eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as; an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses. The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are backlit and it is programmable for security or use with additional remote's. Several TRIGGER control boxes and remote's can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote. The Bluetooth app will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "TRIGGER" lights from outside the vehicle whenever you might need to activate an accessory on demand.

2. NEEWER RT-16 Wireless Studio Flash Trigger

Feature

This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously
Easy installation, low power consumption
No any damage to camera
High-speed and synchronous for 1/200 second
Max. working distance: 30M (open area, without interference)

Description

Features:
This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously.
Easy installation, low power consumption
No any damage to camera.
High-speed and synchronous for 1/200 second.
Max. working distance: 30M (open area, without interference).
16 channels to avoid interference.
The receiver has an on/off switch, and an LED to indicate triggering.
New design: Channel Selector outside the transmitter and the receiver.

Specifications:
Wireless Flash Trigger.
16 channels selectable.
Power Input of Transmitter: 23A 12V battery (included).
Power Input of Receiver: 2 AAA batteries.
Long lifetime of trigger battery, one year or over 20,000 continuously triggers.
Plug size of receiver: 3.5mm.
Adapter size for receiver plug: 3.5mm --> 6.35mm.
PC sync cable included.
Radio working frequency: 433MHz.

How to use:
Make sure the channel selector of both transmitter and receiver at same position.
Insert the receiver's trigger output plug into your flash's jack.
Press the test button on your transmitter. The studio light should now flash.
Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket).
You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hotshoe or hotshoe is engaged).

Package Contents:
1x Trigger.
1x Receiver.

3. Godox Xpro-C 2.4G X System TTL Wireless Flash Trigger Transmitter & 2 X1R-C Controller Receiver for Canon Flash

Feature

Perfect Combination - Godox Xpro-C TTL Wirelees Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combinate with Godox X1R-C Reciever, it can also control the original Canon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution.
TTL Autoflash - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnetic Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
Multi-Functional -Can be used as a Wireless Godox Flash Trigger / Wireless Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions
X1R-C Receiver - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver for Canon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash.
LCD DISPLAY - Both the Xpro-C & X1R are equipped with large LCD display,offs you convenient operation and make the work more efficient.

Description

SPECIFICATION:
Xpro-C Flash Trigger Transmitter
Brand: Godox
Model: Xpro-C
Compatible cameras: Canon EOS cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket.
Power supply: 2*AA batteries
Flash Exposure Control:
TTL autoflash: E-TTL II
Manual flash: Yes
Stroboscopic flash: Yes
Function:
High-speed syncYes
Second-curtain sync :Yes
Flash exposure compensation: Yes. 3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function: Transform the TTL shooting value into the output value in the M mode
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart.
Wireless Flash:
Transmission range (approx.): 0-100m
Built-in wireless:2.4G
Modulation mode:MSK
Channel:32
Wireless ID: 01-99
Group:16

X1R-C Receiver
Brand: Godox
Model: X1R-C
Channel: 32
Group: 5
Operating System: 100 meters(Max.)
Output: 2.5mm sync cord to output
Built-in Remote System: 2.4G wireless transmission
Modulation Mode: MSK
Power by: 2*AA batteries (Not included.)
Item Size: 7 * 6.3 * 4cm / 2.8 * 2.5 * 1.6in
Item Weight: 65g / 2.3oz
Package Size: 10.5 * 10.5 * 5cm / 4.1 * 4.1 * 2.0 inch
Package Weight: 162g / 5.7oz

Package contents:
1*Godox Xpro-C
2*Godox X1R-C
1*Product manual

4. Godox Xpro-C TTL Wireless Flash Trigger for Canon 1/8000s HSS TTL-Convert-Manual Function Large Screen Slanted Design 5 Dedicated Group Buttons 11 Customizable Functions

Feature

Large Dot Matrix LCD: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously
Versatile Trigger: As a Wireless Godox Flash Trigger/A Wireless Canon Speedlites Trigger/A Wireless Shutter Release Trigger/A Flash Trigger with 2.5mm Sync Cord Jack
01-99 Wireless ID: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively
Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode
Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc

Description

More Feautures
FE lock
11 Customizable Functions
Manual Flash 1/1 - 1/256 Power
Modeling Light Status Control
Adjusts the Flash Zoom Coverage for Each Group
Selective Transmission of Data Conserves Energy and Battery Life
Magnification Function Displays Details of Each Group Settings
Global Adjustments to Exposure Values for Multi-Group in M Mode
5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation
Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack

Compatible Camera: Canon EOS Cameras (E-TTL II Autoflash) Support for the cameras that have PC sync socket.
Flash Exposure Control
TTL Autoflash: Canon E-TTL II
Manual flash mode: Yes
Multi (Stroboscopic) flash mode: Yes
Function
HSS (High-speed sync): Yes
Second-Curtain Sync: Yes
Flash exposure compensation: Yes,3 Stops in 1/3 stop increments
Flash exposure lock: Yes
Auto Focus Assist: Yes
Modeling Lamp Control: Control the modeling lamp by the flash trigger
Beeper: Control the sound of the flash trigger
Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM coverage value from the transmitter
TCM function: Transforms the TTL shooting value into the output value in M mode
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart
Wireless Flash
Wireless Signal Range: >328 feet / >100 Meters
Remote System: 2.4GHz
Modulation Mode: MSK
Channels: 32
Wireless ID: 01-99
Groups: 16
Dimensions: 3.5x2.3x2.0"/ 90x58x50mm
Display: Large LCD panel with customizable backlight

PACKAGE CONTENTS:
1* Godox Xpro-C
1* Product manual
1* Pergear Cleaning Kit

5. Neewer 16 Channel Wireless Remote FM Flash Speedlite Radio Trigger with 2.5mm PC Receiver for Flash Units with Universal Hot Shoe

Feature

This flash trigger device is control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless wireless remote signal controlling
The transmitter is consisting of advanced designed circuit and component,and works through sending encoded signal. It comes with 2.5mm sync port,which permits the camera without hot shoe using this flash trigger
This flash trigger can work with all camera with stand hot shoe mount and those cameras with 2.5mm mm port.(but not work with Sony flashes)
Very low voltage working make sure that high level of safety and no damage to camera
It is very useful when you want to trigger 2 flashes at one time

Description

Specification:

Operate frequency: 433MHZ

Sync speed: 1/250s

Work range: 30M

Screw mount on receiver: 1/4"

Battery for tramsmitter: 23A-12V mini batter (the battery included)

Batery for receiver: 2x1.5V AAA battery (the batteries not included)

Suitable:

Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;

Nikon SpeedLight SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;

Olympus FL-50, FL36;

Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;

Sigma EF-500 DG Super, EF-500 DG ST, EF-430;

Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;

Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);

Other flash models with a trigger voltage of 12V or lower;

Work with flash units using universal hot shoe like Nikon, Sigma, Olympus, Pentax (except Minolta SONY as they use a special hot shoe).

Package Contents:

1x Transmitter (with built-in battery)

2x Receiver (AAA Batteries not included)

1x PC Sync cord for camera (2.5mm to Male)

6. TRIGGER 2001 Wireless Accessory Controller 4-Switch Relay System

Feature

Accepts 12-24 volt input
Two 10 amp Fused circuits w/12-24 volt output
Two 30 amp Fused circuits w/12-24 volt output
Wireless back-lit RF remote switch Module

Description

The TRIGGER wireless accessory controller substantially saves installation time of your electronic accessories eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as; an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses. The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are backlit and it is programmable for security or use with additional remote's. Several TRIGGER control boxes and remote's can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote. The Bluetooth app will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "TRIGGER" lights from outside the vehicle whenever you might need to activate an accessory on demand.

7. (2 Trigger Pack) Altura Photo Wireless Flash Trigger for CANON w/ Remote Shutter (Canon EOS 80D, 77D, 70D, 60D, Rebel T7i, T6i, T6, T5i, T5, T4i, T3i, T3, SL1, SL2 DSLR Cameras)

Feature

Kit Includes: Wireless Flash Trigger Kit for Canon (1 Transmitter, 2 Receivers) + MagicFiber Microfiber Lens Cleaning Cloth
Multi-purpose trigger set allows you to wirelessly trigger your camera or flash.
Operating Distance: up to 30 meters (100ft)
Compatible with all Canon cameras with a standard hot-shoe.
Backed with Digital Goja 90-Day 100% Satisfaction Guarantee.

Description

Altura Photo Wireless Flash Trigger w/ Remote Shutter for Canon DSLR Cameras

The Wireless Flash Trigger and Dual Receiver Kit from Altura Photo is a simple solution to wirelessly triggering two flashes up to 100' away. The simplicity and reliability makes this perfect for photographers of all levels. By taking your flash off-camera, you can achieve greater control over the direction and quality of your light for better portraits, group shots, event photography, and more.

Features:
- 16-channel transmitter and receiver unit with operating range of 30m (100ft)
- Max Sync speed of 1/250th sec
- Multi-purpose trigger set allows you to trigger both your flash and camera.
- Receiver features a " tripod thread for connecting your flash to a light stand or any device with a " mounting screw.

Instructions for use:

Off-Camera Flash Setup:
- First, set the transmitter and receiver to the same channel. Next, attach the transmitter to the camera's hot shoe, and the receiver to bottom of your flash. Once you have the receiver and transmitter secured, set the switch on the receiver to "FLASH," and your flash to manual.

Wireless Camera Remote:
- Attach the receiver to the camera using the supplied camera connection cable. Next, set the receiver to "CAMERA." Push the button half-way to focus, and completely to trigger the shutter.

Compatibility:
Compatible with all Canon cameras featuring a standard hot-shoe mount, including:
- DSLRs: e.g. EOS 5D MK IV, 7D MK II, 80D, T6S, T6I, T6, 70D, 60D, T3I, T5I, XSI, XTI, 5D
- Powershot: e.g. G16, G1X MK II, SX60 HS, SX50 HS,
- Mirrorless: e.g. EOS M
- Studio flashes featuring either a mini (3.5mm) or " phono input

Premium MagicFiber Microfiber Lens Cleaning Cloth included with your order.
Ultra-gentle! Extremely fine microfiber leaves zero scratches, streaks or marks. Safe for all lenses.

8. Neewer Wireless STUDIO Flash TRIGGER RT-16 with 3 RECEIVERS 16-Channel

Feature

This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously
Easy installation, low power consumption
sync speed for 1/200 second
Max. working distance: 30M (open area, without interference)
16 channels to avoid interference; The receiver has an on/off switch, and an LED to indicate triggering

Description

Features:
*This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously
*Easy installation, low power consumption *No any damage to camera
*High-speed and synchronous for 1/200 second
*Max. working distance: 30M (open area, without interference)
*16 channels to avoid interference *The receiver has an on/off switch, and an LED to indicate triggering.
] *New design: Channel Selector outside the transmitter and the receiver

Specifications:
Wireless Flash Trigger;16 channels selectable
Input of Transmitter: 23A 12V battery (included)
Power Input of Receiver: 2 AAA batteries Long lifetime of trigger battery, one year or over 20,000 continuously triggers
Plug size of receiver: 3.5mm Adapter size for receiver
plug: 3.5mm -- 6.35mm
PC sync cable included
Radio working frequency: 433MHz

How to use:
Make sure the channel selector of both transmitter and receiver at same positionInsert the receiver's trigger output plug into your flash's jackPress the test button on your transmitter.
The studio light should now flashInsert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket)You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hot shoe or hot shoe is engaged).

Condition & Warranty: This item is 100% New! Never used.1 Year Warranty by Seller. Package Contents 1x Trigger 3x Receivers

9. Godox X2T-C TTL Wireless Flash Trigger for Canon, Bluetooth Connection, 1/8000s HSS,5 Separate Group Buttons, Relocated Control-Wheel, New Hotshoe Locking, New AF Assist Light

Feature

🌿 |Built-in Bluetooth for APP Control|: You Can Connect the X2T-C to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera
🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups' Output Value Simultaneously, ect.
🌿|New User Interface, Easy to Operate|: LCD with Clear Display Effect, With 5 Group Setting Buttons, and 3 Function Buttons to Realize Quick Setting. Relocated Control-Wheel. New Hotshoe Locking Mechanism. New AF Assist Light that Uses Visible Light Instead of A Red/Infrared Pattern. USB-C Connection that is More up to Date and More Reliable than A MicroUSB
🌿 |Effectively Avoid Signal Interference|: With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same
🌿 |3.5mm Sync & USB Type-C Port|: It can work as a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Canon Speedlights Trigger/ Flash Trigger with 3.5mm Sync Cord Jack

Description

Compatible Cameras: Canon EOS cameras(E-TTL II Autoflash), Work with Cameras with PC sync socket
Compatbile Mobile Phone: iPhone, HUAWEI, Samsung(Please refer to teh compatibility list on the manual to know more about the compatible models.)
Power Supply: AA battery X 2
Flash Exposure Control
TTL Autoflash: E-TTL II
Manual Mode:
Multiflash Mode:
Functions
High-Speed Sync:
Rear-Curtain Sync:
Flash Exposure compesation: , 3 stops in 1/3 stop increments
Flash exposure Lock:
Focus Assist:
Modeling Lamp:
Beeper:
Wireless shutter Release: The receiver can control the camera shooting via 3.5mm sync cord jack
Zoom Setting: Adjust the focal length of the fiash through the transmitter
TCM function: Converting the shooting parameter under the TTL mode to a value under the Manual mode
Firmware Upgrade: Support program firmware upgrade via Type C USB cable
Memory Function: As long as 2 seconds after setting parameters, the parameters will be remembered, and the original data will be recovered once restart
Wireless Flash
Transmission Range(approx.): 0-100m
Built-in Wireless System: 2.4G Wireless Transmission
Modulation Mode: MSK
Channels: 32
Wireless ID: 01-99
Groups: 5
Others
Display: A large LCD panel, backlighting on or OFF
Dimension: 72X70x58
Net Weight(g): 90

10. Godox X1T-S 2.4G TTL Wireless Flash Trigger Transmitter for Sony DSLR Cameras with MI Shoe e.g. A77II A7RII A7R A58 A99 ILCE6000L - With Pergear Cleaning Kit

Feature

Built-in 2.4G wireless transmission, operating distance can reach up to 100 meters. Support GR group flash, max.5 groups & 32 channels.
Applies to SONY DSLR Cameras with MI Shoe e.g. A77II, A7RII, A7R, A58, A99, ILCE6000L, etc. Support GR group flash, max.5 groups & 32 channels.
Fully Support TTL autoflash, 1/8000s High-speed Sync, Second Curtain Sync, Flash Exposure Compensation, Flash Exposure Lock, Modeling Flash Control, etc.
X1S transmitter can remote control the Godox Flashes wich has built-in 2.4G wireless X system. When using in combination with XTR-16 or XTR-16S receiver, X1S transmitter can remote control the Godox flashes wich do not have built-in 2.4G wireless X system.
Big and clear LCD panel offers convenient operation. Support USB firmware upgrade. Versatile functions such as synchronization delay setting, wireless shutter release, zoom setting, C.Fn custom functions, etc.

Description

X1T-S Flash Trigger for Sony Cameras that has PC Sync Socket
Built-in Remote System: 2.4G wireless transmission
Modulation Mode: MSK
Power Supply: 2 * AA(Not Included)
Exposure Control
Manual Flash: Yes
TTL autoflash: TTL
Multi Flash: yES
TTL Control
HSS: Yes
Flash Exposure Compensation: Yes(stops in 1/3 stop increments)
Flash Exposure Lock: Yes
Focus Assis: Manual open
Second Curtain Sync: No
Modeling Flash: Yes(Setting on the camera)
Wireless Flash
Controllable Slave Group: Max.5(A/B/C/D/E)
Transmission Range(Max.): About 100m
Channels: 32
Others
Sync Delay Set: Yes(0-10ms, use 100 as the unit)
Modeling flash: ON/OFF
Zoom Setting: Adjust the flash's focal length through the transmitter
LCD Panel: Wide LCD Panel, backlight on/off
Output InterfaceUse a PC cord to input and output
Firmware UpgradeUse the Micro USB to upgrade
Memory Function Settings will be stored 2 second after last operation and recover after a restart

Package Content
1 * X1T-S Transmitter
1 * Pergear Clean Kit

Conclusion

By our suggestions above, we hope that you can found the best trigger wireless for you. Please don't forget to share your experience by comment in this post. Thank you!