All in all, we spent hundreds of hours combing through thousands of user reviews to put together a comprehensive list of the best porta nailer 402 nails on the market. We then delved into these porta nailer 402 nails further and put together detailed reviews so that you can easily pick the best porta nailer 402 nails for your needs.

Best porta nailer 402 nails

Related posts:

Best porta nailer 402 nails reviews

1. Porta-Nails 42629 2-Inch x 16-Gauge T-Head Hardwood Flooring Nails (1,000-Pack)

Feature

1,000 nails will fasten approximately 200 sq. ft. of 2-1/4 in. wide tongue-and-groove flooring
Use for angle and face nailing applications without damage to the flooring
Use for decorative paneling and ceilings and sub-flooring
Use with the Porta-Nailer and or Portamatic flooring installation tools (sold separately)
Cupped point to help the nail to cut through the wood and avoid splitting even with very hard species

Description

The Porta-Nail 2 in. x 16-Gauge T-head Hardwood Flooring Nails feature cupped points to help the nails to cut through the wood and avoid splitting even with very hard species. Full-hard carbon-steel construction to help prevent the nail from bending during installation. The nails have a wide-head wedge shaped design for a tight floor as well as well-defined barbs to help prevent the nail from backing out.

2. NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler with White Rubber Mallet Ergonomic and Lightweight Nail Gun for T-Cleats, L-Cleats, and Staples

Feature

1 Year Warranty
Uses staples, T-Cleats, and L-Cleats
White Rubber Mallet ; One Piece Driver Blade
Interchangeable Base Plates ; Black Oxide Rail
Hardened Driver Blade

Description

The 3-in-1 flooring nailer from NuMax is great for the professional and homeowner alike. This nailer is easy to operate and conveniently shoots all three types of flooring fasteners; flooring staples, T-Cleats, and L-Cleats ranging in size from 1-1/2 To 2. Long. The NuMax nailer has a long handle that provides more comfortable use, and the two interchangeable base plates allow you to install , 15/32, 5/8, 19/32 and 25/32 Tongue and Groove Wood Flooring.
The NuMax flooring nailer also comes with a non-marring white rubber mallet, oil, and wrenches. The NuMax flooring nailer is backed by a one year warranty.
The NuMax nailers offer the best option for renting a flooring nailer due to its overall value in the flooring nailer category, quickly justifying its cost of rental fees and time lost picking-up and returning the tool. Owning your flooring nailer allows you to work at your own pace and sure the job is done right and not rush through it to avoid additional rental fees.

3. Porta-Nails 465SLT 3-in-1 Pneumatic Nailer & Stapler with Case For Wood Flooring

Feature

Use for 16-gauge nailing or 15.5-gauge stapling of sold and engineered wood flooring
Easy to use with pneumatic compressed air pressure from 70 to 120 psi and mallet activation
Compatible with 15.5-gauge, 1/2 in. crown BCS type flooring staples like Porta-Nails models 47271, 47261, and 4723
Compatible with 16-gauge L-cleat flooring nails like Porta-Nails models 4702, 4703, 4704 and 47080
Compatible with 16-gauge T-cleat flooring nails like Porta-Nails models 42640, 42629, and 42660

Description

The Porta-Nails 465SLT 3-in-1 Pneumatic Floor Nailer and Stapler drives 16-gauge L- and T-style flooring cleat nails, as well as 15.5-gauge flooring staples. The 465SLT comes complete with non-marring mallet, 3/4 in. pre-attached base plate, 1/2 in. interchangeable base plate, wrenches, oil and a carrying case. Perfect for installation of 5/8 in., 3/4 in. and 33/32 in. domestic solid wood, 3/8 in. to 9/16 in. solid wood, and 9/16 in. engineered wood flooring. The versatile magazine holds 100 nails or 120 staples. Extremely easy to use at just 10.75 lbs. with an operating pressure range from 70 to 120 psi.

4. Porta-Nails 418A Pneumatic 18 Gauge Hardwood & Bamboo Floor Nailer with Adjustable Shoe For L-Cleat Nails

Feature

This product adds a great value
Product is highly durable and very easy to use
This product is manufactured in China

Description

Portamatic evolution, 18 gauge floor nailer, includes hammer, specifically designed for the installation of 3/8 inch to 3/4", 10-19mm, engineered & solid wood flooring including bamboo flooring, use with 18 gauge 1-3/4", 1-1/2 inch or 1-1/4 inch L type barbed flooring nails, compact design allows you to get closer to the end walls, wide profile shoe for increased stability, quick load magazine, ergonomic comfort grip handle, fully adjustable shoe for accurate configuration to varying flooring thickness, holds 110 nails, use with nails #41801, TV #128-358 & #41803.This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in china.

5. 402A, 16-Gauge Manual Hardwood Flooring Nailer

Feature

Uses 2 in., and 1-1/2 in. T Headed 16 Ga nails
Binds 5/8 in., 3/4 in. and 33/32 in. domestic solid wood flooring
Accessory shoes, sold separately, allow you to face nail and nail 3/8 in. - 9/16 in. solid wood, 5/8 in. bamboo and 18mm flooring
Comes with an extension handle, mallet, angled shoe for 5/8 in. to 3/32 in. tongue and groove flooring, wrenches and a rugged carrying case
Multi-hit minimizes fatigue while providing greater impact

Description

Nothing attacks a hardwood flooring job like the Porta-Nails 402A, 16-Gauge Manual Hardwood Flooring Nailer. The first of its kind offering Porta-Nails original ratchet assembly, the nailer ensures that the ram does not return until the nail is properly seated. One or two strikes of the head is all it takes for preferred seating every time. Bind nails 5/8 in., 3/4 in. and 33/32 in. domestic solid wood flooring. Accessory shoes, sold separately, allow you to face nail and nail 3/8 in. - 9/16 in. solid wood, 5/8 in. bamboo and 18mm flooring. The patented anti-split nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. Nailer uses 2 in., and 1-1/2 in. T Headed 16 Gauge cleats. Flooring Nails and are also available in stainless steel for exterior use, when using over ACQ plywood or installing ACQ decking over ACQ joist. The nailer comes with an extension handle, mallet, angled shoe for 5/8 in. to 3/32 in. tongue and groove flooring, wrenches and a rugged carrying case.

6. Porta-Nails 40225 Face Nail Shoe (404 Porta-Nailer)

Feature

Accessory that converts 402 Porta-Nailer to a face nailer
Ideal for nailing the first and last few courses of flooring
Provides easy, convenient tool conversion
Features strong, durable construction
Weighs 2.7 pounds

Description

Porta-Nails Vertical Nailing Shoe For 402A Angled Nailer

7. PORTA-NAILS 42640 Porta Nails (1000 Pack), 1-1/2"

Feature

Exclusive shark-like serrated tooth nail construction
Designed for use with select models
Available in a 1000 pack

Description

Porta-nails nails are manufactured with an exclusive shark-like serrated tooth nail construction providing a tighter biting and longer hold. Specially designed for use in porta-nails nailers 402 true value #627-711, 403 true value #627-885, 421 true value #651-240 and 470 true value #705-816. The convenient 1000 pack covers approximately 200 SQFT of 2-1/4 strip flooring.

8. Porta-Nails 4702 16 Gauge 2-Inch Flooring Nails (1,000 per Box)

Feature

Full hard carbon steel construction to prevent the nail from bending during installation
Covers 200 Sq Ft
Use for a variety of applications including T&G Wood Flooring, decorative paneling and ceiling, sub-flooring
Well defined barbs to prevent the floor from moving
16 ga construction to prevent the nail from bending during installation

Description

PORTA-NAILS, 1,000 count, 2", 16 gauge, L nails, for use with PORTA-NAILS 470a 16 gauge nailer, TV #705-816.This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in United States.

9. Porta-Nails 40230 Thin Flooring (3/8-Inch - 9/16-Inch) Shoe

Feature

Postions nail correctly for nailing 3/8" - 9/16" flooring

Description

40230 Features: -Flooring shoe. -For use with porta-nails 402A, 16-gauge manual hardwood flooring nailer. -Made in USA. -Converts 402A nailer for use with 0.375 to in. solid wood flooring and 0.5 to 0.5625 engineered wood flooring. Number of Items Included: -1. Flooring Type: -Hardwood. Dimensions: Overall Height - Top to Bottom: -3 Inches. Overall Width - Side to Side: -3 Inches. Overall Depth - Front to Back: -9 Inches. Overall Product Weight: -1.2 Pounds.

10. Porta-Nails Face Nailing Shoe to Convert Angle at which Nail is Driven, #40225

Feature

Converts your nailer from driving nails at a 45-degree angle to 90 degrees
For use on the porta-nailer
Use with the starter and ending rows of strip flooring that are too close to the wall for blind nailing
Die-cast aluminum construction with a thin plastic base to help protect prefinished floors
For use with the 402 16-gauge manual porta nailer

Description

Porta-Nails 1-1/2x16-Gauge Taped 1M Bright Steel T-Head Flooring Nails, #42640 - Convert Your 16-Gauge Manual Nailer From Driving Nails At A 45-Degree Angle To A 90-Degree Angle With The Porta-Nails Face Nailing Shoe This Shoe Is Die Cast With Aluminum For Long Life And Features A Thin Plastic Base To Help Protect Prefinished Floors From Marring Use With The Starter And Ending Rows Of Strip Flooring That Are Too Close To The Wall For Blind Nailing Durable Powder Coat Paint Finish For Use With The Porta-Nails 402A, 16-Gauge Manual Hardwood Flooring Nailer (Sold Separately).

Conclusion

By our suggestions above, we hope that you can found the best porta nailer 402 nails for you. Please don't forget to share your experience by comment in this post. Thank you!
Jane Mathis