Check expert advices for trigger yongnuo nikon?

There are many reasons you might choose to buy trigger yongnuo nikon but it is not easy to find the best suitable trigger yongnuo nikon for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best trigger yongnuo nikon.

Best trigger yongnuo nikon

Related posts:

Best trigger yongnuo nikon reviews

1. YONGNUO Wireless Flash Trigger & Shutter Release RF-605N RF605N for Nikon DSLR D850 D810 A D780 D750 D6 D5 D7500 D7200 D5600 D5300 D5100 D3500 D3400

Feature

RF605=RF602+RF603
TX/RX/TRX multiple working ways
A/B/C/D/E/F 6 groups (compatible with YN560-TX)
Wireless shutter remote control, Clear LCD screen display,shortcut key operation
16 channels, communication range up to 100M

Description

Compared with RF-603 II, RF-605 has below function:
1, it has two communication modes RF-602 and RF-603, so you can use RF-605, RF-603 II, RF-602 together. ( but you can't use them in group function together )
2, it has TX (single transmit) / RX ( single receiver ) / TRX (transmit-receive automatic switch), so you can not only use it as transmitter but also as receiver.
3, it has A/B/C/D/E/F 6 groups ( compatible with YN560-TX )
4, it has wireless shutter remote control, wireless Flash trigger function.
5, it has Clear LCD screen, shortcut key operation
6, it has 16 channels ( FSK 2.4GHz wireless channel )

Features:
1, Shutter release function
a, RF-602 mode, supports wireless shutter release, the transmitter set to " TX " mode, the receiver set to " RX " mode.
b, RF-603 mode, supports wired / wireless shutter released, all transceivers set to " TRX " mode. In this mode, you can use RF-605 single transceiver as wired shutter release function.
2, Flash Trigger function
a, set the communication mode: Set all the transmitters and receivers to the same communication mode
b, Set the transmit-receiver status": Set the transmitter to TX, the receiver sete to RX or TRX.
3, You can use shutter release function and flash trigger function simultaneously.
4, You can use it with Studio Strobe Light with the 6.35mm Sync Cable.

Compaible with:
Flash Trigger
Yongnuo RF-602 N, RF-603 N1 / N3, RF-603 II N1 / N3, YN560-TX N
Camera:
Nikon D7100 D7000 D5200 D5100 D5000 D3100 D3000 D90 D80 D70 D70s D40 D800E D800 D700 D300s D300 D200 D2X D2H D200 D1H D1X D3X D3
Yongnuo YN-560 III YN-560 II YN-460 II YN-460 in manual mode
Yongnuo YN-565EX, YN-568EX II in manual mode

Package Including:
2 x RF-605 N transceivers
1 x N1 version shutter release cable
1 x N3 version Shutter release cable
1 x Manual in Chinese and English
1 x Original Box

2. Yongnuo Professional Flash Trigger RF-603 II N3 for Nikon DSLR D7100, D7000, D5100, D5000, D3200, D3100, D600, D90, D53,D750 etc

Feature

1.Works as a wireless shutter release control to trigger your camera;Transceiver System - works as a wireless flash trigger and receiver
2.Compatible with Canon Rebel Nikon:DSLR D7100, D7000, D5100, D5000, D3200, D3100, D600, D90, D5300.,750
3.Fulfill the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing and Bulb.
4.Receiver Stand-by time:up to 45hours (using AAA battery)
5.One set of RF-603 can control 2pcs Flash Speedlite at the same time.

Description

Description:

The new RF-603 II is improved version of RF-603,Improved features:

1. Hot shoe locking system to prevent from slipping off

2. Switch on side for easy operation

3. Enhanced self-detecting system


Feature:

You can use the flash trigger and remote shutter release function simultaneity.

The image for the transmitter and the receiver are the same, if one is mounted into the camera as transmitter, other one will be set up as receiver

To fire the Flash Speedlite --- one receiver can fire one flash speedlite, one set of RF-603 can control 2pcs Flash Speedlite at the same time.

If your have 2sets RF-603 but you lost one receiver for Canon version

you can use the Nikon receiver and Canon transmitter together,if it is compatible with the hot shoe of camera.


Specification:

Type:FSK 2.4GHz wireless remote system

Transmitter Distance:100M

Channel:16 Channels

Release:Half-way press, Full-way Press

Receiver Interface one is 2.5mm Socket, for shutter release,

one is standard PC socket for flash Speedlite or studio Strobe.

Battery Type:AAA*2

Receiver Stand-by time:Up to 45hours (Using AAA battery)

Size:Receiver : 37 x 30 x 81.5mm (W x H x D)


Packaged Included: (No batteries included)

1 x Transmitter

1 x Receiver

1 x 2.5mm port Shutter release cable (N3 version)

1 x Manual in English and Chinese
note:battery do not include

3. YONGNUO YN560-TX LCD Flash Trigger Remote Controller for Nikon and YN560-III With Wake-up function for Nikon cameras

Feature

YN560-TX LCD Flash Trigger Remote Controller for Nikon and YN560-III
When a YN560-TX Nikon version works on Nikon cameras, it can wake up a sleeping YN560-III flash
YN560-TX is also compatible with RF-602, RF-603 and RF-603 II triggers / receivers
Wireless Triggering Function and Wireless Shutter Receiver Function
100 meters transmission Range

Description

YN560-TX, Manual Flash Controller, made specially for Yongnuo YN-560 III made after January of 2013 year, but if you want to use it with our other Yongnuo flash speedlite, you just need the transceiver of Yongnuo RF-602, RF-603, RF-603 II, because YN560-TX has built-in wireless trigger system.You can use it not only as flash controller function, but aslo use it as remote control function. he difference between Nikon version and Canon version is only the wake-up function. When a YN560-TX Nikon version works on Nikon cameras, it can wake up a sleeping YN560-III flash, while on Canon cameras it can not do so. For the other cameras Pentax, Fujifilm, Panasonic, Sony, Sigma, the wake-up function is not available either. YN560-TX transmitter unit, which will provide remote manual power control and zoom setting for the popular inexpensive YN-560 III manual flash units. Yongnuo's manual flash power and zoom controller YN560-TX is also compatible with RF-602, RF-603 and RF-603 II triggers / receivers .Together with RF-602/3 triggers it is a wireless trigger with 6 groups and 16 channels. 6 groups A, B, C, D, E, F, G are more than other triggers on the market offer and should fulfill all needs. Main Features: FSK 2.4G wirelss controller M / Multi Two mode Remote Control of Flash output and Zoom per group, up to 6 groups, A/B/C/D/E/F Zoom range: 24-105m Shutter Interface: 2.5mm shutter interface Compatible with YN-560 III, RF-602, RF-603, RF-603 II 16 Channels Large and Clear Screen, user friendly interface 100 meters transmission Range Battery Type: AA*2 Stand-by time: 120hours Suit for: Yongnuo YN-560 III made after January of 2013 year. Yongnuo RF-602 transmitter, RF-603, RF-603 II transceiver Yongnuo YN-560 II, YN-468 II, YN-565EX, YN-568EX in manual mode ( You need to use RF-602, RF-603, RF-603 II together. ALL Nikon DSLR Camera. Packaged included: 1 x YN560-TX Flash Controller for Nikon version 1 x Manual in English and Chinese 1 x Original box

4. Yongnuo RF-603NII-N1 Wireless Remote Flash Trigger Kit for Nikon D800 D700 D300 D200 D1 D2 D3 D4

Feature

The new RF-603 II is improved version of RF-603, it is a remote shutter release as well as a multi-functional flash trigger which can synchronously trigger flashes and studio strobes.
Through the transceiver based system each item can be used flexibly as trigger or receiver.
Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m.
The synchronization speed can reach to 1/320, depending on the situation.

5. Yongnuo RF-603 II 16-Ch Wireless Flash Trigger for Nikon DC2 Connection D90/D600, D3000/D5000, D7000 Series Cameras, 2.4GHz Fre, 1/320sec Sync Speed

Feature

This Item Includes: Yongnuo 2x RF-603N II Wireless Flash Trigger - LS 2.5 Shutter Cable - User Manual - Yongnuo 1 Year Limited Warranty
Compatibility: Nikon DC2 Connection D90/D600, D3000/D5000 Series, D7000 Series Cameras
Type: FSK 2.4GHz wireless remote control system
Transmission distance: 100m / 328.08'
Channels: 16

Description

Yongnuo RF-603 II adopts a global free FSK 2.4GHz wireless channel which can be suitable in many countries. RF-603 II with FSK system, can be more effective to guarantee speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m and suitable for RF-603I. RF-603 II wireless flash trigger kit is formed by two same transceivers. It can be set to single transmit state (TX), which will be more convenient for testing flash and can be set to transceiver state (TRX), automatically switch transmit and receive state, adopts focus and shutter function in "TX" and "TRX" state respectively. Transmitter supports single contact triggering, supports wireless wakening up and triggering the flash through the camera hot shoe, with PC sync cable (optional) can be trigger studio lights, with specially camera shutter connecting cable can realize wired / wireless shutter release remote control, supports controlling multiple cameras and flashes at the same time. The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed).

6. YONGNUO YN-622N-TX YN622N-TX Wireless TTL Flash Controller Transmitter with LCD Display working with HSS& Full Function for Nikon

Feature

Wireless TTL Flash Controller Transmitter with LCD Display working with HSS& Full Function for Nikon
High-speed Synchronous and Remote Control Function
Max Sync. Speed: 1/8000s
Mix TTL, Remote Manual, and SuperSync Groups
Syne mode ( 1st-curtain, 2nd-curtain, Hi-speed sync ( Auto FP ) )

Description

The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N ITTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. Also adding a USB port for firmware updates, which is major advantage over the current triggers. The improved YN-622N-TX also enhances stability, as well as improving information transmission speeds. Note: You should use it with Yongnuo Flash Trigger YN-622N tranceivers together. Features: 1. 3 Groups ( A/B/C) 2. Mix TTL, Remote Manual, and SuperSync Groups 3. Syne mode ( 1st-curtain, 2nd-curtain, Hi-speed sync ( Auto FP ) ) 4. Max Sync. Speed: 1/8000s 5. Trigger Interface: Hot shoe, PC 6. Individual 1/3rd stop Manual Power and FEC adjustment 7. Remote Flash Zoom in 3 groups, and Auto Zoom 8. 2nd Curtain Sync, HSS, SuperSync 9. USB port for Firmware Updates 10. AF Assist Light 11. Remote Shutter Release Function Compatible Camera: Nikon: D70 D70s D80 D90 D200 D300s D600 D700 D800 D3000 D3100 D3200 D5000 D5100 D5200 D5300 D7000 D7100 Compatible Flash: ( You should use it with YN-622N together ) A: ETTL Flash: ( It suport wireless remote control through camera menu ) Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II, YN-465 Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo B: Other Flashes: (Not support TTL function or HSS) Canon 580EX, 550EX, 540EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX Yongnuo YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460 Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT Sigma EF-500 DG Super, EF-500 DG ST, EF-430 Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Package Included: 1 x YN-622N-TX Controller 2 x YN-622N Transceivers 1 x LS-2.5/N1 Shutter Connecting Cable 1 x LS-2.5/N3 Shutter Connecting Cable 2 x Manual in Chinese and English 1 x Original box

7. YONGNUO Wireless TTL Flash Trigger YN622N II with High-speed Sync HSS 1/8000s for Nikon Camera

Feature

The new upgrade version YN622N II supports receiving the trigger signal of the YN560-TX/RF605 (603MODE)/RF603II Series products.
Equipped with quick lock design and supports USB firmware upgrade.
High-speed Synchronous and Remote Control Function.
Supporting mixed mode and Single-contact of camera and flash trigger.
Work with Strobe Studio flash light in HSS function.

Description

Main Functions:
Support "622" communication mode,"603-RX" communication mode
Compatible flash mode: i-TTL, Manual flash
Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s
Support remote set the parameters of flash through the transceiver (Remote Control Mode)
Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode)
Support the flash installed on transmitter(on-top flash)and supports i-TTL function
Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode)
Support FEC, FVL function
Support modeling flash and red-eye reduction flash
Support flash zooming (auto)
Built-in AF assist beam emitter (AF Lamp)
Settings saved automatically
Compatible with YongNuo/ Nikon series flashes
Support PC port triggering strobe flashes
PC port support front/rear curtain sync and high-speed sync(Super Sync)function
Support single-contact of camera & flash triggering (max sync speed is 1/250s)
Suit for (Camera) :
Nikon D70 D70S D60 D80 D90 D4 D3X D3S D3 D2X D40X D40 D800E D800 D700 D600series D300S D300 D200 D7000 D5200 D5100D5000 D3200 D3100 D3000
Flash compatible (i-TTL):
SB600 SB700 SB800 SB900 SB910
YN467N YN468N(II) YN560II YN560III YN565N YN568N
Package including:
2 x YN-622N II transceivers
1 x Instuction in English and Chinese
1 x Original Yongnuo Box

8. Yongnuo YN-560IV(560III upgrade version,a Combination of YN-560 III and YN560-TX all functions) 2.4G Wireless Flash Speedlite Trigger Controller for Canon Nikon Olympus Pentax

Feature

Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter
YN560 IV=YN560III+YN560-TX, Supports Wireless Master Function, Supports Multiple Trigger Synchronous Mode
Supports setting save automatically, custom settings ( fn )
GN58@ISO100, 105mm ( M / MUlti mode )
Supports ultra-fast charging recycle system, External power supply

Description

Specification: YN-560 IV Flash Speedlite is a combination of YN-560 III and YN560-TX, it has built-in wireless trigger system, so you can not only use it as flash speedlite, but also a flash controller Transmitter. Functions: *YN-560 IV can be used as master unit, provides 3 independent groups with controlling abiligy, realizing remote control the flas mode, flash output, and focal length of YN-560 IV and YN-560 III. *One YN-560 IV can receive the wireless signal from YN560 IV, YN560-TX, RF-603 II and RF-602, with optical 16 channels. When YN-560 IV and YN560-TX used as transmitter, it can realize remote control and parameter settings. *It can be triggered through the flash mounted on the camera, 2.4G wireless triggering system, S1 and S2 pre flash cancel mode. Features: a, TX Master Flash mode: When you set up YN-560IV as TX mode, it can be used as a flash controller transmitter, it can trigger YN-560 IV ( RX mode )and YN-560 III ( RX mode ), and also can be used with RF-602, RF-603 II, RF-605 together. b, RX Slave Mode: When you set up YN-560IV as RX mode, you can use it with YN560-TX flash controller, and RF-602, RF-603 II, RF-605 single transceiver. c, Manual mode d, Multi mode e, S1 / S2 mode --- You should use those two modes off camera f, Power saving mode g, Overheating Protection h, Manually set and zooming position g, PC Synchronous Port Package Including: 1 x YN-560 IV Flash Speedlite 1 x Protecting bag 1 x Original box 1 x Manual in Chinese and English

9. Yongnuo RF-603N II Wireless Remote Flash Trigger N3 for Nikon D90 D600 D3000 ...

Feature

The new RF-603 II is improved version of RF-603, it is a remote shutter release as well as a multi-functional flash trigger which can synchronously trigger flashes and studio strobes.
Through the transceiver based system each item can be used flexibly as trigger or receiver.
Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m.
The synchronization speed can reach to 1/320, depending on the situation.

Description

Improved features:
1. Hot shoe locking system to prevent from slipping off
2. Switch on side for easy operation
3. Enhanced self-detecting system

Functions:
Supports single contact triggering.
Can achieve wired and wireless remote shutter release function.
Flash Trigger: to fire the Flash Speedlite; to fire the Studio Strobe light (You need to purchase an extra 6.35mm cable to fulfill this function).
You can use ABOVE TWO FUNCTIONS simultaneousty.

This listing is for N3 version:
For Nikon D90 D600 D3000series D5000series D7000series

Specifications:
Type: FSK 2.4GHz wireless remote sustem
Transmitter distance: 100M
Channel: 16 channels
Release: half-way press, full-way press
Receiver interface: one is 2.5mm socket
Studio flash light interface: Standard PC socket
Battery type: 2 * AAA (not included)
Stand-by time: Up to 45hours (TRX); up to 400hours (TX)
Item size: 80.7 * 31.3 * 25.9mm / 3.2 * 1.2 * 1.0in
Item weight: 44g/ 1.6oz (each)
Package size: 16 * 9 * 4.5cm / 6.3 * 3.5 * 1.8in
Package weight: 170g / 6.0oz

Package List:
1 * Tranceiver
1 * Receiver
1 * Shutter connecting calbe N3
1 * Manual (English)

10. YONGNUO YN968N Wireless TTL Flash Speedlite 1/8000s HSS Equipped with Built-in LED Light 5600K for Nikon DSLR Cameras Compatible with YN622N YN560 Wireless System

Feature

Equipped with a high power LED light, brightness can be adjusted, there is a built-in diffuser and a color conversion filter for the LED light.
Compatible with YN622N and YN560 Wireless System
High guide number: GN60@ISO100,105mm, supports high-speed sync TTL, manual flash, multi flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s.
The YN968N supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~105mm.
The YN968N equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the YONGNUO official website to upgrade the flash.

Description

Specifications:
Brand: YONGNUO
Model: YN968N
Circuit Design: Insulated Gate Bipolar Transistor (IGBT)
Guide No.: 60 (ISO 100, 105mm)
Flash Mode: TTL, M, Multi
Trigger Mode: Set-top, radio wireless master mode, radio wireless slave mode, wireless optical slave mode (SC, SN, SC&SN, S1, S2)
Zoom: Auto, 20, 24, 28, 35, 50, 70, 80, 105
Vertical Rotation Angle: -7~150 degrees
Horizontal Rotation Angle: 0~360 degrees
Power Supply: 4 * AA size battery (Alkaline or Ni-MH battery)
Lighting Times: 100-1500 times (AA alkaline cell used)
Recycle Time: Approx. 3s (AA alkaline cell used)
Flash Color Temperature: 5600K
Flash Time: 1/200s~1/20000s
Flash Control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning
External Interface: Hot shoe, PC port
LED Color Temperature: Approx. 5500K
LED Luminance: Approx. 300lux (1m)
Optical Transmission Triggering Distance: 20~25m indoor, 10~15m outdoor
Radio Transmission Triggering Distance: Up to 100m
Additional Features: Master flash, high-speed sync, second-curtain sync, FEC, FEB, FVL, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, overheat protection, custom functions (C. Fn), personal functions (P. Fn)
Item Size: (Extended state)7.8 * 6.05 * 20.6cm / 3.1 * 2.4 * 8.1in
Item Weight: 435g / 15.3oz
Package Size: 22 * 10 * 9cm / 8.7 * 3.9 * 3.5in
Package Weight: 621g / 21.9oz

Package List:
1 * Flash Speedlite
1 * Mini Stand
1 * Color Conversion Filter for LED Light
1 * Protecting Bag
1 * User Manual (English & Chinese)

Note:
Batteries are not included.

Conclusion

By our suggestions above, we hope that you can found the best trigger yongnuo nikon for you. Please don't forget to share your experience by comment in this post. Thank you!